Re: The reset-on-eject fix
David Evans <[email protected]>
| Newsgroups | gmane.linux.ports.xbox.devel |
|---|---|
| Message-ID | <[email protected]> |
On Tue, Jun 15, 2004 at 03:02:43PM +0100, David Pye wrote: > > Very much so. Have a read of the PIC documentation on the xbox-linux site. > > The PIC has two modes - one where it resets UNLESS you respond to its > interrupt within a set period of time - MS dash uses this, and another mode, > where it resets whatever you do. > OK. The online docs aren't terribly clear about this. They talk about register 0x19 (simple enough to set to 1) and then mention that you can't disable the interrupt once you've enabled it. There's no mention of this interrupt guaranteeing reset. > You can put the pic into the second mode, but once it's there, there's no way > to get it back into the 'dont reset unless I ignore your interrupt" mode > short of a powercycle. > ...or a reset, since I believe that you can play with the tray all you want after the reset takes place. > Do yourself a favour - either do the dash hack (if you must) or buy a modchip > or tsop flash if you dont want games. Otherwise, you've no way to eject the > drive tray ever ;) > Yeah...it's beginning to look that way. Bummer. -- David Evans [email protected] Ph.D. Candidate, Computer/Synth Junkie http://bbcr.uwaterloo.ca/~dfevans/ University of Waterloo "Default is the value selected by the composer Ontario, Canada overridden by your command." - Roland TR-707 Manual ------------------------------------------------------- This SF.Net email is sponsored by The 2004 JavaOne(SM) Conference Learn from the experts at JavaOne(SM), Sun's Worldwide Java Developer Conference, June 28 - July 1 at the Moscone Center in San Francisco, CA REGISTER AND SAVE! http://java.sun.com/javaone/sf Priority Code NWMGYKND