xpad drivers

Hi,

I have some troubles with xpad drivers  
i got an "Intec"(NAKI) wireless xbox pad(not 360)
it works perfectly on windows computer with XBCB drivers but
i just can t get it to works on linux with xpad drivers.

here are the infos:

kernel
------

Linux meka 2.6.17.7 #3 PREEMPT Thu Aug 3 18:45:46 CEST 2006 x86_64 GNU/Linux

/proc/bus/usb/devices
---------------------

T:  Bus=03 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  2 Spd=12  MxCh= 3
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=110b ProdID=8801 Rev= 0.01
S:  Product=NAKI
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 64mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=255ms

T:  Bus=03 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0c12 ProdID=0005 Rev= 0.01
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=00 Driver=usbhid
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=10ms

i ve added those ID to xpad, Vendor=0c12 ProdID=0005..i tried:
 { 0x0c12, 0x0005, 0, "Naki 2.4ghz Wireless Controller" }
and..
 { 0x110b, 0x8801, 0, "Naki 2.4ghz Wireless Controller ALT" }
 (this 2 lines with xpad 0.1.6, note that i ve tried with diff xpad version
from 0.0.5)

 i know about Driver=hub ..but i didn t know what else to test...

modprobe usbhid; modprobe evdev; modprobe xpad; modprobe joydev
---------------------------------------------------------------

Aug  3 19:15:42 meka kernel: usbcore: registered new driver hiddev
Aug  3 19:15:42 meka kernel: usbhid 3-4.1:1.0: usb_probe_interface
Aug  3 19:15:42 meka kernel: usbhid 3-4.1:1.0: usb_probe_interface - got id
Aug  3 19:15:43 meka kernel: input: HID 0c12:0005 as /class/input/input6   
Aug  3 19:15:43 meka kernel: input: USB HID v1.10 Joystick [HID 0c12:0005]
on usb-0000:00:02.1-4.1
Aug  3 19:15:43 meka kernel: usbcore: registered new driver usbhid
Aug  3 19:15:43 meka kernel:
/mnt/hdc3/KERNEL/linux-2.6.17.7/drivers/usb/input/hid-core.c: v2.6:USB HID
core driver
Aug  3 19:15:43 meka kernel: usbcore: registered new driver xpad
Aug  3 19:15:43 meka kernel:
/mnt/hdc3/KERNEL/linux-2.6.17.7/drivers/usb/input/xpad.c: driver for Xbox
controllers v0.1.6
Aug  3 19:15:43 meka input.agent[3472]:      joydev: loaded successfully

jstest /dev/js0
---------------
jstest /dev/js0
Driver version is 2.1.0.
Joystick (HID 0c12:0005) has 6 axes (X, Y, Z, Rz, Hat0X, Hat0Y)
and 12 buttons (Trigger, ThumbBtn, ThumbBtn2, TopBtn, TopBtn2, PinkieBtn,
BaseBtn, BaseBtn2, BaseBtn3, BaseBtn4, BaseBtn5, Ba
Testing ... (interrupt to exit)
Axes:  0:-32767  1:-32767  2:-32767  3:-32767  4:     0  5:     0 Buttons: 
0:off  1:off  2:off  3:off  4:off  5:off  6:off

i can do whatever i want with the pad, jstest will not show anything...
now if i try "cat /dev/js0" i got ~2 or 3 lines of craps (not always the
same values) but nothing more when i play with the gamepad.

i need help, i dunno what else to try :/

(if this is not te right place to post this, just give me a link cauze i
didn t find any other appropriate place, many links about xpad are down...)

thx
-- 
View this message in context: http://www.nabble.com/xpad-drivers-tf2047245.html#a5637947
Sent from the xbox-linux-devel forum at Nabble.com.


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV