Re: PPP Modem Hangup

I get the following output:

on AOSP Target Device:
# stty -F /dev/ttyMSM0  -a
speed 115200 baud; rows 0; columns 0; line = 0;
intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>;
eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z;
rprnt = ^R; werase = ^W; lnext = <undef>; discard = <undef>; min = 1;
time = 0;
-parenb -parodd -cmspar cs8 -hupcl -cstopb cread clocal -crtscts
ignbrk -brkint ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl
-ixon -ixoff -iuclc -ixany -imaxbel -iutf8
-opost -olcuc -ocrnl -onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0
bs0 vt0 ff0
-isig -icanon -iexten -echo -echoe -echok -echonl -noflsh -xcase
-tostop -echoprt -echoctl -echoke -flusho -extproc

on Ubuntu/Linux machine:
speed 115200 baud; rows 0; columns 0; line = 0;
intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>;
eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z;
rprnt = ^R; werase = ^W; lnext = ^V; discard = ^O; min = 1; time = 0;
-parenb -parodd -cmspar cs8 -hupcl -cstopb cread clocal -crtscts
ignbrk -brkint ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl
-ixon -ixoff -iuclc -ixany -imaxbel -iutf8
-opost -olcuc -ocrnl -onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0
bs0 vt0 ff0
-isig -icanon -iexten -echo -echoe -echok -echonl -noflsh -xcase
-tostop -echoprt -echoctl -echoke -flusho -extproc

On Tue, Sep 10, 2024 at 5:39 AM Michael Richardson <[email protected]> wrote:
>
>
> Given that you have:
>
>       local                     # Do not use modem control lines; assume a
>
> then pppd ought to tell the TTL to ignore DCD drops.
> Is this a real serial connection, or actually serial over USB or PPPoE?
> Looks like USB0.  USB/TTL adapter I bet.  Are other pins being used for
> (JTAG) programming, reset?
>
> Maybe "stty -F /dev/ttyUSB0 -a" (as root) during your magic 6s.
> Is clocal set?
>
>