Re: Printing Problems under OS X
Benjamin Renes <[email protected]>
| Newsgroups | gmane.linux.printing.gimp-print.devel |
|---|---|
| Message-ID | <[email protected]> |
I solved the Problem, it was a misconfiguration in the custom paper format. The Gutenprint preset has a non printable area of top: 3,18mm and bottom: 14,11mm, in my settings it was mistakenly set to top:5mm and bottom: 15mm. Now the size is accurate. Sorry to bother you --- Benjamin Renes Kalscheurer Weg, Weg T 23 50969 Köln Germany --- Mobil 01577 325 50 37 > Am 15.04.2021 um 15:11 schrieb Benjamin Renes <[email protected]>: > > Dear Gutenprint Team, > > thank your for this Driver, the oputput is very good. Colors are finer than printing with the standard Epson driver. > I am running a Epson 7900 with Gutenprint 5.3.3 and I have a problem with the size of the output Material. > > When I print on a sheet with for example 610x160mm, with a graphic of 160x80mm. Then the Graphics height is distorted about 10mm, > so that the size of the graphic is 160x90mm. > > In the driver I turned on in „Shrink page if necessary: Crop (preserve dimensions) and „Borderless: No“. > > Any Idea where this is coming from and what I can do to change it? > > Best Regards, > > Benjamin > > > --- > Benjamin Renes > Kalscheurer Weg, Weg T 23 > 50969 Köln > Germany > > --- > Mobil 01577 325 50 37 > _______________________________________________ Gimp-print-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/gimp-print-devel