CSA-Job-pnotify kernel patch for 2.6.16.21 and csa-3.0.0 uploaded

Hi,

I uploaded CSA-Job-pnotify kernel patches for 2.6.16.21 to
oss.sgi.com
    pnotify-2.6.16.21 [under pagg project]
    job-2.6.16.21     [under pagg project]
    linux-2.6.16.21.acct_eop.patch   [under csa project]
    linux-2.6.16.21.csa_module.patch [under csa project]

These csa/job rpms were also uploaded:
    job-1.5.6-1.i586.rpm
    job-1.5.6-1.src.rpm
    csa-3.0.0-1.i586.rpm
    csa-3.0.0-1.src.rpm

This set of CSA kernel patches requires a csa rpm of version
3.0.0 or later. Changes to API were made such that csa-2.2.2
or earlier would not work with this kernel patch. However,
pacct files created in csa-2.x.x are supported in csa-3.0.0.

I built the job rpm using the source of job-1.5.6-sgi500rp2
of ProPack 5. Besides a little packaging things, i believe
this code is basically the same as job-1.5.6-0.1 posted by
Erik before.


The changelog since csa-2.2.2:
* Thu Feb 24 2006 Jay Lan <[email protected]>
- csa-3.0.0
- csacom -[esES] option was broken.
- create /usr/sbin/rccsa symlink at %install in the spec file
- remove code for CSA record types not supported in Linux
- spliting up csa_kern.h into kernel version and userland version
- support pacct files created in csa-2.x.x                   
- incompatible with csa-2.x.x releases. User appls need recompilation.     
- needs csa_module kernel module of 2.6.16.21.               
                                                             

You can get the new CSA patch at
ftp://oss.sgi.com/projects/csa/download/
and get the related pnotify and job patches at
ftp://oss.sgi.com/projects/pagg/download/


Visit http://oss.sgi.com/projects/csa/ for more information about CSA.

Please check them out and have fun. Let me know if you have any
problems.

Best regards,

Jay Lan - Linux System Software - Silicon Graphics