RE: PXES with fixed IP

Wayne Love <[email protected]>
Newsgroups gmane.linux.pxes.devel
Message-ID <CB8FA5537A1BD411AFBE00B0D021A9AC014A7214@exch_pepper_01.wirthlin.co.uk>
Could you not set up a separate scope, one scope (existing) for your
'internet-enabled' computers and another for PXES?  You can then set the
reservations in the second scope to allocate static ip addresses to your
machines.  This based upon the mac address of the client machine.

Alternatively if your machines all share the same sub-net and you cannot set
up a second scope then if you assign that reservations in the existing
scope, those machines with a reservation will be forced to take one of the
non internet enabled ip addresses whilst those that don't have a reservation
will not be able to take on of the statically defined addresses.

Hope this helps.

Wayne.

-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: 26 November 2003 08:55
To: [email protected]; [email protected]
Subject: Re: [pxes-devel] PXES with fixed IP


Thanks for your quick reply !

DHCP is no problem to me. But we use our DHCP server for other purposes.
(Mobile workers with internet access). So the problem is that when I use
DHCP for the Thin Clients, they'll be consuming an 'internet-enabeled' IP.
Because we have serveral plants with in every site such a DHCP server, I
don't see any solution to fix it with DHCP. :o(

With kind regards,

Kristof



>-- Original Message --
>From: "Tim Bates" <[email protected]>
>To: <[email protected]>
>Reply-To: [email protected]
>Date: Wed, 26 Nov 2003 19:14:30 +1100
>Subject: Re: [pxes-devel] PXES with fixed IP
>
>
>> The HOWTO's on the site are clear to me, but how can I use a fixed IP
for
my
> clients. Do I have to modify a ini-file or so ?
> Could somebody help me? I've little experience with Linux (bash).

The IP addresses for the clients are set using DH
>P. You can set fixed IP
addresses based on the Ethernet (hardware) address of the client cards.
I
assume you will be using a MS DHCP server, which means I cant really give
you an example config, but there should be enough info in the help for DHCP

>onfig in Windows server.

Tim Bates



-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive?  Does it
help you create better code? 
>SHARE THE LOVE, and help us help
YOU!  Click Here: http://sourceforge.net/donate/
_______________________________________________
pxes-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/pxes-devel





-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive?  Does it
help you create better code?  SHARE THE LOVE, and help us help
YOU!  Click Here: http://sourceforge.net/donate/
_______________________________________________
pxes-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/pxes-devel


-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive?  Does it
help you create better code?  SHARE THE LOVE, and help us help
YOU!  Click Here: http://sourceforge.net/donate/
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.