Re: SV: No sceens found (TFT)

Are you using pxesconfig's MonitorDB to select monitor frequencies ?
Should help...

On Tue, 2004-02-17 at 10:13, Eliassen Einar (ErgoGroup) wrote:

    Hello :)
    
    Try making a image with horizontal monitor frequency 30-95 kHz and vertical
    frequency 50-160 Hz and see if that works.
    
    It helped on the TFT screens I have.
    
    
    Regards,
    
    Einar
    
    
    -----Opprinnelig melding-----
    Fra: [email protected]
    [mailto:[email protected]] 
    Sendt: 17. februar 2004 12:15
    Til: [email protected]
    Emne: [pxes-devel] No sceens found (TFT)
    
    
    
    
    
    
    
    Hi list,
    
    I have a problem when using PXES and TFT monitors.
    First of all, I install PXES on the hard disk of the computer (a Fujitsu 233
    with an ati rage mach64 and 64MB ram) because the the connection to the
    different offices is to slow to support TFTP and distributed servers is not
    an option. There are 2 types of these machines in the company, with only
    minor differences. The first has the videocard intergrated in the mainboard,
    and the second has an PCI version of the same videocard.
    
    This never gave any problems (I am using PXES 0.7) when using CRT monitors,
    in which case I used the option monitor autodetect. However, we recently
    bought quite an amount of TFT monitors, which have an ideal resolution of
    1024*768*60HZ. When I specify a refresh rate during the image creation (also
    the ones which have been mentioned in the forum) everything works fine and
    48.3 HZ horizontal and 60 HZ vertical is selected on the machine with the
    intergrated videocard.
    
    However, when I use this image on the other machine (with exactly the same
    videocard only not intergrated) PXES starts fine, but when X starts I get
    the error:
    
    Fatal server error
    No screens found
    
    (EE) screens where found, but none where compatible.
    
    Because I use the harddisk installation.. I cannot change my settings after
    the image is installed, I can change my settings actually, but when I reboot
    they aren't saved. This is why I am waiting desperatly for 0.8, which I hope
    will solve my problem with the client configuration tool. Unforunatly it has
    been delayed, and I donnot know for how long.
    
    So does anyone have any suggestions for the current version??
    
    Thanks in advance
    
    Robin
    Barneveld Schevers
    +31 (0)30 60 16 200
    
    =================================
    De informatie verzonden met dit E-mail bericht is uitsluitend bestemd voor
    de geadresseerde. Gebruik van deze informatie door anderen dan de
    geadresseerde is verboden. Openbaarmaking, vermenigvuldiging, verspreiding
    en/of verstrekken van deze informatie aan derden is niet toegestaan.
    Barneveld Schevers staat niet in voor de juiste en volledige overbrenging
    van een verzonden E-mail, noch voor tijdige ontvangst daarvan.
    ================================= The information contained in this
    communication is confidential and may be legally privileged. It is intended
    solely for the use of the individual or entity to whom it is addressed and
    others authorised to receive it. If you are not the intended recipient you
    are hereby notified that any disclosure, copying, distribution or taking any
    action in reliance on the contents of this information is strictly
    prohibited and may be unlawful. Barneveld Schevers is neither liable for the
    proper and complete transmission of the information contained in this
    communication nor for any delay in its receipt.
    =================================
    
    
    
    -------------------------------------------------------
    SF.Net is sponsored by: Speed Start Your Linux Apps Now.
    Build and deploy apps & Web services for Linux with
    a free DVD software kit from IBM. Click Now!
    http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
    _______________________________________________
    pxes-devel mailing list
    [email protected]
    https://lists.sourceforge.net/lists/listinfo/pxes-devel
    
    
    
    -_____________________________________________ 
    
    The contents of this e-mail are confidential to the person(s) or
    organisation(s) to whom it is addressed. No-one else may copy or forward all
    or any of it in any form without the prior written consent of the
    originator. If you have received this e-mail in error, please contact the
    sender and delete the material from any computer. 
    
    
    
    
    -------------------------------------------------------
    SF.Net is sponsored by: Speed Start Your Linux Apps Now.
    Build and deploy apps & Web services for Linux with
    a free DVD software kit from IBM. Click Now!
    http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
    _______________________________________________
    pxes-devel mailing list
    [email protected]

https://lists.sourceforge.net/lists/listinfo/pxes-devel
    ______  ________                                             
   /  /   \/  /___  )  I  N   T   E   G   R   A   C   I   O   N  
  /  /       /___  /   I  N   F   O   R   M   A   T   I   C   A  
 /__/__/\___/_____'    
 Diego Torres Milano Maipu 42 Office 164 - (C1084ABB) Buenos Aires 
Argentina
 [email protected]     Tel: +5411 4331-2233 Fax +5411 4331-3377 
www.in3.com.ar