Re: Problems with TFTP-Booting

On Thu, Feb 19, 2004 at 07:16:51PM +0100, Rene Bartsch wrote:
> Am Donnerstag, 19. Februar 2004 18:23 schrieb Diego Torres Milano:
> > Is your TFTP working ?
> 
> From /etc/inet.d:
> 
> --------------------------- snip ---------------------------------------------
> 
> #:BOOT: Tftp service is provided primarily for booting.  Most sites
> # run this only on machines acting as "boot servers."
> tftp           dgram   udp     wait    root  /usr/sbin/in.tftpd 
> /usr/sbin/in.tftpd -s /var/lib/tftpboot/pxes
> 
Mi advise: use /var/lib/tftpboot as TFTP root and add -v (if supported by your tftpd) to increase verbosity.
> --------------------------- snap ---------------------------------------------
> 
> > Try it from another client (FAT), or after having booted from CD.
> > # cd /tmp
> > # tftp server
> 
> "tftp echelon" works
> 
> >
> > > get file
> but when doing "get pxelinux.0"
After having made the change on TFTP root, and restarted inetd, try
# tftp echelon
< get /pxes/pxelinux.0
< quit

> 
> I get "Error code 1: File not found"
> 
> > > quit
> >
> > Which boot file is set in your DHCP response ?
> 
> --------------------------- snip ---------------------------------------------
> 
>   next-server echelon;
>   filename "pxelinux.0";
And, if tftp worked, change this to
filename "/pxes/pxelinux.0"
> 
> --------------------------- snap ---------------------------------------------
> 
> >
> > On Thu, Feb 19, 2004 at 01:31:20AM +0100, Rene Bartsch wrote:
> > > Hi,
> > >
> > > until now I used CD-images with PXES. Now I tried TFTP with the new NICs
> > > (Intel PRO/1000MT). But I get the following messages from the NIC:
> > >
> > > PXE-T01: File not found
> > > PXE-E3B: TFTP-Error - File Not found
> > > PXE-M0F: Exiting Intel Boot Agent
> > >
> > > The NIC gets all DHCP data including "next-server", but it seems it
> > > cannot access the boot files by TFTP.
> > >
> > > With Knoppix-Terminal everything works fine.
> > >
> > > I've installed the Debian Packages from Ghe Rivero.
> > >
> > > Can anyone give me a hint where to start debugging with TFTP/PXES?
> > >
> > > Thanx
> > > Rene
> > >
> > >
> > >
> > > -------------------------------------------------------
> > > SF.Net is sponsored by: Speed Start Your Linux Apps Now.
> > > Build and deploy apps & Web services for Linux with
> > > a free DVD software kit from IBM. Click Now!
> > > http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
> > > _______________________________________________
> > > pxes-devel mailing list
> > > [email protected]
> > > https://lists.sourceforge.net/lists/listinfo/pxes-devel
> 
> 
> 
> -------------------------------------------------------
> SF.Net is sponsored by: Speed Start Your Linux Apps Now.
> Build and deploy apps & Web services for Linux with
> a free DVD software kit from IBM. Click Now!
> http://ads.osdn.com/?ad_id56&alloc_id438&opick
> _______________________________________________
> pxes-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/pxes-devel

-- 
    ______  ________                                             
   /  /   \/  /___  )  I  N   T   E   G   R   A   C   I   O   N  
  /  /       /___  /   I  N   F   O   R   M   A   T   I   C   A  
 /__/__/\___/_____'    

 Diego Torres Milano   42 Maipu Of. 164  -  (1084) Buenos Aires
 <[email protected]>    Argentina. Tel: +5411 4331-2233 Fax 4331-3377


-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id56&alloc_id438&op=click