RE: i810 audio /dev/sound/dsp missing

That page says

Aureal AU8810 PCI Sound chip 

So you need to find a driver for that.  Gigabyte haven't used the i810
chipset with audio on that board.

By the looks of Google, http://aureal.sourceforge.net/ is your best bet, but
theres plenty of links.



-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Ola Samuelson
Sent: Wednesday, 24 March 2004 1:43 a.m.
To: [email protected]
Subject: Re: [pxes-devel] i810 audio /dev/sound/dsp missing


sorry.......this is the board
http://www.giga-byte.com/MotherBoard/Products/Products_GA-6WMMC7.htm


Craig FALCONER wrote:

>If this is your board, then it doesn't have on-board audio and you must 
>be using an off-board one.
>
>http://www.giga-byte.com/MotherBoard/Products/Products_GA-BX2000.htm
>http://www.giga-byte.com/Motherboard/FileList/ProductImage/photo_bx2000
>s_big
>.jpg
>
>Please boot PXEs and flip over to console F3 or F4, and run
>	cat /proc/pci
>And look for anything relating to audio.
>
>If your sound card is ISA you'll have to pull it out and look at it.
>
>What made you think it was i810 audio?
>
>-----Original Message-----
>From: [email protected]
>[mailto:[email protected]] On Behalf Of Ola 
>Samuelson
>Sent: Monday, 22 March 2004 9:08 p.m.
>To: [email protected]
>Subject: Re: [pxes-devel] i810 audio /dev/sound/dsp missing
>
>
>Gigabyte BX2000. Should be 810 as far as i can tell.
>In BIOS "AC97 AUDIO Enabled"
>
>Craig FALCONER wrote:
>
>  
>
>>Either its not a i810 chipset / audio device, or
>>its not supported by the i810 module in 2.4.20, or
>>it isn't turned on in the bios.
>>
>>What is the motherboard exactly?
>>
>>
>>
>>-----Original Message-----
>>From: [email protected]
>>[mailto:[email protected]] On Behalf Of Ola
>>Samuelson
>>Sent: Saturday, 20 March 2004 1:34 a.m.
>>To: [email protected]
>>Subject: [pxes-devel] i810 audio /dev/sound/dsp missing
>>
>>
>>Hi!
>>It almost works...... but the local audio.
>>i get "/dev/sound/dsp missing" at boot and audio server can not be
>>started.
>>
>>I do not know what i am doing wrong here.
>>If i force(or from the console load) ac97_codec there are no messages.
>>loadin i810_audio.o fails with  "no such device".
>>
>>So "/dev/sound/dsp missing"  shows even after successful loading of 
>>ac97_codec.
>>
>>Ideas?
>>TIA
>>//Ola
>>//
>>    
>>
>
>
>
>-------------------------------------------------------
>This SF.Net email is sponsored by: IBM Linux Tutorials
>Free Linux tutorial presented by Daniel Robbins, President and CEO of 
>GenToo technologies. Learn everything from fundamentals to system 
>administration.http://ads.osdn.com/?ad_id70&alloc_id638&op=click
>_______________________________________________
>pxes-devel mailing list
>[email protected] 
>https://lists.sourceforge.net/lists/listinfo/pxes-devel
>  
>

-- 
Ola Samuelson

Phone  : /+46 36 700 85/
Mobile :/+46 707 981 666/


*Datalink Nordic AB*
Box 9062
SE-550 09 Jönköping

Phone   : /+46 36 700 85/
Fax       :/+46 36 700 45/
Internet : /www.datalink.se/

/linkSearch - The search tool for your business!/


-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo
technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id70&alloc_id638&op=ick
_______________________________________________
pxes-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/pxes-devel



-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id70&alloc_id638&op=click