Re: RE:Problem compiling custom kernel with default values

Diego Torres Milano <[email protected]>
Newsgroups gmane.linux.pxes.devel
Organization IN3
Message-ID <1107271445.5841.36.camel@zebra> 
Sascha,
I have had no time yet to look into your problem.
I will try to look at it in the next few days.
Supermount is a problematic patch, this is one of the biggest problems
in porting PXES to 2.6 too.

Regards.

On Tue, 2005-02-01 at 12:02, Sascha Juch wrote:
> Hello everybody,
> me again :)
> 
> I now tried to compile a 2.4.20 kernel _without_ squashfs and supermount
> with SCSI Disk support and all the USB-support enabled. That worked
> fine.
> 
> Finally I found out, that the compiling error only occures if supermount
> is patched into the Kernel. There is no problem with squashfs:
> 
> Kernel 2.4.20 incl. squashfs (V2.1-rc2)     -> compilation successfully
> Kernel 2.4.20 incl. squashfs and supermount -> same error as below
> Kernel 2.4.20 incl. supermount              -> same error as below
> 
> So the problem occures only with the supermount patch. 
> 
> Can you tell me how you could compile the sources with SCSI disk support
> enabled Diego?
> 
> Thanks a lot in advance,
> greetings,
> Sascha.
> 
> 
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of
> [email protected]
> Sent: Tuesday, February 01, 2005 5:14 AM
> To: [email protected]
> Subject: pxes-devel digest, Vol 1 #744 - 1 msg
> 
> Send pxes-devel mailing list submissions to
> 	[email protected]
> 
> To subscribe or unsubscribe via the World Wide Web, visit
> 	https://lists.sourceforge.net/lists/listinfo/pxes-devel
> or, via email, send a message with subject or body 'help' to
> 	[email protected]
> 
> You can reach the person managing the list at
> 	[email protected]
> 
> When replying, please edit your Subject line so it is more specific than
> "Re: Contents of pxes-devel digest..."
> 
> 
> Today's Topics:
> 
>    1. Problem compiling custom kernel with default values (Sascha Juch)
> 
> --__--__--
> 
> Message: 1
> Date: Mon, 31 Jan 2005 14:54:33 +0100
> From: "Sascha Juch" <[email protected]>
> To: <[email protected]>
> Subject: [pxes-devel] Problem compiling custom kernel with default
> values
> Reply-To: [email protected]
> 
> This is a multi-part message in MIME format.
> 
> ------_=_NextPart_001_01C5079C.64C947D4
> Content-Type: text/plain;
> 	charset="US-ASCII"
> Content-Transfer-Encoding: quoted-printable
> 
> Hello list members,
> 
> I have the following problem in compiling a custom kernel:
> 
> * plain Vanilla kernel 2.4.20 patched with squashdfs and supermount=20
> * .config from the original PXES 0.9
> 
> Problem: It is not possible to compile support for USB-Storage devices.
> 
> When compiling with that config I encounter the following error
> (anything related to SCSI included):
> 
> gcc -D__KERNEL__ -I/usr/src/linux-2.4.20-6pxes/include -Wall
> -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common
> -fomit-frame-pointer -pipe
> -mpreferred-stack-boundary=3D2 -march=3Di586 -DMODULE -DMODVERSIONS =
> -include /usr/src/linux-2.4.20-6pxes/include/linux/modversions.h
> -nostdinc -iwithprefix include -DKBUILD_BASENAME=3Dscsicam  -c -o
> scsicam.o scsicam.c gcc -D__KERNEL__
> -I/usr/src/linux-2.4.20-6pxes/include -Wall -Wstrict-prototypes
> -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer
> -pipe
> -mpreferred-stack-boundary=3D2 -march=3Di586 -DMODULE -DMODVERSIONS =
> -include /usr/src/linux-2.4.20-6pxes/include/linux/modversions.h
> -nostdinc -iwithprefix include -DKBUILD_BASENAME=3Dscsi_proc  -c -o
> scsi_proc.o scsi_proc.c gcc -D__KERNEL__
> -I/usr/src/linux-2.4.20-6pxes/include -Wall -Wstrict-prototypes
> -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer
> -pipe
> -mpreferred-stack-boundary=3D2 -march=3Di586 -DMODULE -DMODVERSIONS =
> -include /usr/src/linux-2.4.20-6pxes/include/linux/modversions.h
> -nostdinc -iwithprefix include -DKBUILD_BASENAME=3Dscsi_error  -c -o
> scsi_error.o scsi_error.c gcc -D__KERNEL__
> -I/usr/src/linux-2.4.20-6pxes/include -Wall -Wstrict-prototypes
> -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer
> -pipe
> -mpreferred-stack-boundary=3D2 -march=3Di586 -DMODULE -DMODVERSIONS =
> -include /usr/src/linux-2.4.20-6pxes/include/linux/modversions.h
> -nostdinc -iwithprefix include -DKBUILD_BASENAME=3Dscsi_obsolete  -c -o
> scsi_obsolete.o scsi_obsolete.c gcc -D__KERNEL__
> -I/usr/src/linux-2.4.20-6pxes/include -Wall -Wstrict-prototypes
> -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer
> -pipe
> -mpreferred-stack-boundary=3D2 -march=3Di586 -DMODULE -DMODVERSIONS =
> -include /usr/src/linux-2.4.20-6pxes/include/linux/modversions.h
> -nostdinc -iwithprefix include -DKBUILD_BASENAME=3Dscsi_queue  -c -o
> scsi_queue.o scsi_queue.c gcc -D__KERNEL__
> -I/usr/src/linux-2.4.20-6pxes/include -Wall -Wstrict-prototypes
> -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer
> -pipe
> -mpreferred-stack-boundary=3D2 -march=3Di586 -DMODULE -DMODVERSIONS =
> -include /usr/src/linux-2.4.20-6pxes/include/linux/modversions.h
> -nostdinc -iwithprefix include -DKBUILD_BASENAME=3Dscsi_lib  -c -o
> scsi_lib.o scsi_lib.c gcc -D__KERNEL__
> -I/usr/src/linux-2.4.20-6pxes/include -Wall -Wstrict-prototypes
> -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer
> -pipe
> -mpreferred-stack-boundary=3D2 -march=3Di586 -DMODULE -DMODVERSIONS =
> -include /usr/src/linux-2.4.20-6pxes/include/linux/modversions.h
> -nostdinc -iwithprefix include -DKBUILD_BASENAME=3Dscsi_merge  -c -o
> scsi_merge.o scsi_merge.c gcc -D__KERNEL__
> -I/usr/src/linux-2.4.20-6pxes/include -Wall -Wstrict-prototypes
> -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer
> -pipe
> -mpreferred-stack-boundary=3D2 -march=3Di586 -DMODULE -DMODVERSIONS =
> -include /usr/src/linux-2.4.20-6pxes/include/linux/modversions.h
> -nostdinc -iwithprefix include -DKBUILD_BASENAME=3Dscsi_dma  -c -o
> scsi_dma.o scsi_dma.c gcc -D__KERNEL__
> -I/usr/src/linux-2.4.20-6pxes/include -Wall -Wstrict-prototypes
> -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer
> -pipe
> -mpreferred-stack-boundary=3D2 -march=3Di586 -DMODULE -DMODVERSIONS =
> -include /usr/src/linux-2.4.20-6pxes/include/linux/modversions.h
> -nostdinc -iwithprefix include -DKBUILD_BASENAME=3Dscsi_scan  -c -o
> scsi_scan.o scsi_scan.c gcc -D__KERNEL__
> -I/usr/src/linux-2.4.20-6pxes/include -Wall -Wstrict-prototypes
> -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer
> -pipe
> -mpreferred-stack-boundary=3D2 -march=3Di586 -DMODULE -DMODVERSIONS =
> -include /usr/src/linux-2.4.20-6pxes/include/linux/modversions.h
> -nostdinc -iwithprefix include -DKBUILD_BASENAME=3Dscsi_syms
> -DEXPORT_SYMTAB -c scsi_syms.c ld -m elf_i386 -r -o scsi_mod.o scsi.o
> hosts.o scsi_ioctl.o constants.o scsicam.o scsi_proc.o scsi_error.o
> scsi_obsolete.o scsi_queue.o scsi_lib.o scsi_merge.o scsi_dma.o
> scsi_scan.o scsi_syms.o gcc -D__KERNEL__
> -I/usr/src/linux-2.4.20-6pxes/include -Wall -Wstrict-prototypes
> -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer
> -pipe
> -mpreferred-stack-boundary=3D2 -march=3Di586 -DMODULE -DMODVERSIONS =
> -include /usr/src/linux-2.4.20-6pxes/include/linux/modversions.h
> -nostdinc -iwithprefix include -DKBUILD_BASENAME=3Dsd  -c -o sd.o sd.c
> sd.c: In function `sd_init_onedisk':
> sd.c:823: `SDev' undeclared (first use in this function)
> sd.c:823: (Each undeclared identifier is reported only once
> sd.c:823: for each function it appears in.)
> make[2]: *** [sd.o] Fehler 1
> make[2]: Verlassen des Verzeichnisses Verzeichnis
> >/usr/src/linux-2.4.20-6pxes/drivers/scsi<
> make[1]: *** [_modsubdir_scsi] Fehler 2
> make[1]: Verlassen des Verzeichnisses Verzeichnis
> >/usr/src/linux-2.4.20-6pxes/drivers<
> make: *** [_mod_drivers] Fehler 2
> [root@devtux linux]#
> 
> (translation for the non-germans :)):
> "Fehler" =3D "Error"
> "Verlassen des Verzeichnisses" =3D "Leaving directory"
> 
> I did anything else correct. As soon as I disable anything under SCSI
> except the general "SCSI support" the kernel compiles and runs fine with
> PXES.
> Problem then is, that I cannot use USB-Storage devices.
> >From the modules under ...2.4.20-12pxes/kernel/drivers/scsi in PXES 0.9
> I see there are:
> ide-scsi.o
> scsi_mod.o
> sd_mod.o
> 
> scsi_mod.o is the general SCSI support. sd_mod.o however is the "SCSI
> disk support" which doesn't want to compile. (I didn't find out so far
> how ide-scsi.o is be compiled)
> 
> Can anyone give me a hint - or can you have a look at your current
> config Diego if the one provided with PXES 0.9 is the wrong one?
> 
> Thanks a lot in advance,
> Sascha=20
> 
> ------_=_NextPart_001_01C5079C.64C947D4
> Content-Type: text/html;
> 	charset="US-ASCII"
> Content-Transfer-Encoding: quoted-printable
> 
> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN"> <HTML> <HEAD> <META
> HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; = charset=3Dus-ascii">
> <META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version =
> 6.5.7226.0"> <TITLE>Problem compiling custom kernel with default
> values</TITLE> </HEAD> <BODY>
> <!-- Converted from text/rtf format -->
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">Hello list members,</FONT> </P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">I have the following problem in =
> compiling a custom kernel:</FONT> </P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">* plain Vanilla kernel 2.4.20 patched
> = with squashdfs and supermount </FONT>
> 
> <BR><FONT SIZE=3D2 FACE=3D"Tahoma">* .config from the original PXES =
> 0.9</FONT> </P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">Problem: It is not possible to compile
> = support for USB-Storage devices.</FONT> </P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">When compiling with that config I =
> encounter the following error (anything related to SCSI =
> included):</FONT> </P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">gcc -D__KERNEL__ =
> -I/usr/src/linux-2.4.20-6pxes/include -Wall -Wstrict-prototypes =
> -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer
> = -pipe</FONT></P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">-mpreferred-stack-boundary=3D2 =
> -march=3Di586 -DMODULE -DMODVERSIONS -include =
> /usr/src/linux-2.4.20-6pxes/include/linux/modversions.h&nbsp; -nostdinc
> = -iwithprefix include -DKBUILD_BASENAME=3Dscsicam&nbsp; -c -o scsicam.o
> = scsicam.c</FONT></P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">gcc -D__KERNEL__ =
> -I/usr/src/linux-2.4.20-6pxes/include -Wall -Wstrict-prototypes =
> -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer
> = -pipe</FONT></P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">-mpreferred-stack-boundary=3D2 =
> -march=3Di586 -DMODULE -DMODVERSIONS -include =
> /usr/src/linux-2.4.20-6pxes/include/linux/modversions.h&nbsp; -nostdinc
> = -iwithprefix include -DKBUILD_BASENAME=3Dscsi_proc&nbsp; -c -o =
> scsi_proc.o scsi_proc.c</FONT></P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">gcc -D__KERNEL__ =
> -I/usr/src/linux-2.4.20-6pxes/include -Wall -Wstrict-prototypes =
> -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer
> = -pipe</FONT></P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">-mpreferred-stack-boundary=3D2 =
> -march=3Di586 -DMODULE -DMODVERSIONS -include =
> /usr/src/linux-2.4.20-6pxes/include/linux/modversions.h&nbsp; -nostdinc
> = -iwithprefix include -DKBUILD_BASENAME=3Dscsi_error&nbsp; -c -o =
> scsi_error.o scsi_error.c</FONT></P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">gcc -D__KERNEL__ =
> -I/usr/src/linux-2.4.20-6pxes/include -Wall -Wstrict-prototypes =
> -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer
> = -pipe</FONT></P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">-mpreferred-stack-boundary=3D2 =
> -march=3Di586 -DMODULE -DMODVERSIONS -include =
> /usr/src/linux-2.4.20-6pxes/include/linux/modversions.h&nbsp; -nostdinc
> = -iwithprefix include -DKBUILD_BASENAME=3Dscsi_obsolete&nbsp; -c -o =
> scsi_obsolete.o scsi_obsolete.c</FONT></P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">gcc -D__KERNEL__ =
> -I/usr/src/linux-2.4.20-6pxes/include -Wall -Wstrict-prototypes =
> -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer
> = -pipe</FONT></P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">-mpreferred-stack-boundary=3D2 =
> -march=3Di586 -DMODULE -DMODVERSIONS -include =
> /usr/src/linux-2.4.20-6pxes/include/linux/modversions.h&nbsp; -nostdinc
> = -iwithprefix include -DKBUILD_BASENAME=3Dscsi_queue&nbsp; -c -o =
> scsi_queue.o scsi_queue.c</FONT></P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">gcc -D__KERNEL__ =
> -I/usr/src/linux-2.4.20-6pxes/include -Wall -Wstrict-prototypes =
> -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer
> = -pipe</FONT></P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">-mpreferred-stack-boundary=3D2 =
> -march=3Di586 -DMODULE -DMODVERSIONS -include =
> /usr/src/linux-2.4.20-6pxes/include/linux/modversions.h&nbsp; -nostdinc
> = -iwithprefix include -DKBUILD_BASENAME=3Dscsi_lib&nbsp; -c -o
> scsi_lib.o = scsi_lib.c</FONT></P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">gcc -D__KERNEL__ =
> -I/usr/src/linux-2.4.20-6pxes/include -Wall -Wstrict-prototypes =
> -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer
> = -pipe</FONT></P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">-mpreferred-stack-boundary=3D2 =
> -march=3Di586 -DMODULE -DMODVERSIONS -include =
> /usr/src/linux-2.4.20-6pxes/include/linux/modversions.h&nbsp; -nostdinc
> = -iwithprefix include -DKBUILD_BASENAME=3Dscsi_merge&nbsp; -c -o =
> scsi_merge.o scsi_merge.c</FONT></P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">gcc -D__KERNEL__ =
> -I/usr/src/linux-2.4.20-6pxes/include -Wall -Wstrict-prototypes =
> -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer
> = -pipe</FONT></P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">-mpreferred-stack-boundary=3D2 =
> -march=3Di586 -DMODULE -DMODVERSIONS -include =
> /usr/src/linux-2.4.20-6pxes/include/linux/modversions.h&nbsp; -nostdinc
> = -iwithprefix include -DKBUILD_BASENAME=3Dscsi_dma&nbsp; -c -o
> scsi_dma.o = scsi_dma.c</FONT></P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">gcc -D__KERNEL__ =
> -I/usr/src/linux-2.4.20-6pxes/include -Wall -Wstrict-prototypes =
> -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer
> = -pipe</FONT></P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">-mpreferred-stack-boundary=3D2 =
> -march=3Di586 -DMODULE -DMODVERSIONS -include =
> /usr/src/linux-2.4.20-6pxes/include/linux/modversions.h&nbsp; -nostdinc
> = -iwithprefix include -DKBUILD_BASENAME=3Dscsi_scan&nbsp; -c -o =
> scsi_scan.o scsi_scan.c</FONT></P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">gcc -D__KERNEL__ =
> -I/usr/src/linux-2.4.20-6pxes/include -Wall -Wstrict-prototypes =
> -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer
> = -pipe</FONT></P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">-mpreferred-stack-boundary=3D2 =
> -march=3Di586 -DMODULE -DMODVERSIONS -include =
> /usr/src/linux-2.4.20-6pxes/include/linux/modversions.h&nbsp; -nostdinc
> = -iwithprefix include -DKBUILD_BASENAME=3Dscsi_syms&nbsp;
> -DEXPORT_SYMTAB = -c scsi_syms.c</FONT></P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">ld -m elf_i386 -r -o scsi_mod.o scsi.o
> = hosts.o scsi_ioctl.o constants.o scsicam.o scsi_proc.o scsi_error.o =
> scsi_obsolete.o scsi_queue.o scsi_lib.o scsi_merge.o</FONT></P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">scsi_dma.o scsi_scan.o =
> scsi_syms.o</FONT>
> 
> <BR><FONT SIZE=3D2 FACE=3D"Tahoma">gcc -D__KERNEL__ =
> -I/usr/src/linux-2.4.20-6pxes/include -Wall -Wstrict-prototypes =
> -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer
> = -pipe</FONT></P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">-mpreferred-stack-boundary=3D2 =
> -march=3Di586 -DMODULE -DMODVERSIONS -include =
> /usr/src/linux-2.4.20-6pxes/include/linux/modversions.h&nbsp; -nostdinc
> = -iwithprefix include -DKBUILD_BASENAME=3Dsd&nbsp; -c -o sd.o =
> sd.c</FONT></P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">sd.c: In function =
> `sd_init_onedisk':</FONT>
> 
> <BR><FONT SIZE=3D2 FACE=3D"Tahoma">sd.c:823: `SDev' undeclared (first =
> use in this function)</FONT>
> 
> <BR><FONT SIZE=3D2 FACE=3D"Tahoma">sd.c:823: (Each undeclared identifier
> = is reported only once</FONT>
> 
> <BR><FONT SIZE=3D2 FACE=3D"Tahoma">sd.c:823: for each function it =
> appears in.)</FONT>
> 
> <BR><FONT SIZE=3D2 FACE=3D"Tahoma">make[2]: *** [sd.o] Fehler 1</FONT>
> 
> <BR><FONT SIZE=3D2 FACE=3D"Tahoma">make[2]: Verlassen des Verzeichnisses
> = Verzeichnis =
> &raquo;/usr/src/linux-2.4.20-6pxes/drivers/scsi&laquo;</FONT>
> 
> <BR><FONT SIZE=3D2 FACE=3D"Tahoma">make[1]: *** [_modsubdir_scsi] Fehler
> = 2</FONT>
> 
> <BR><FONT SIZE=3D2 FACE=3D"Tahoma">make[1]: Verlassen des Verzeichnisses
> = Verzeichnis &raquo;/usr/src/linux-2.4.20-6pxes/drivers&laquo;</FONT>
> 
> <BR><FONT SIZE=3D2 FACE=3D"Tahoma">make: *** [_mod_drivers] Fehler =
> 2</FONT>
> 
> <BR><FONT SIZE=3D2 FACE=3D"Tahoma">[root@devtux linux]#</FONT> </P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">(translation for the non-germans =
> :)):</FONT>
> 
> <BR><FONT SIZE=3D2 FACE=3D"Tahoma">&quot;Fehler&quot; =3D =
> &quot;Error&quot;</FONT>
> 
> <BR><FONT SIZE=3D2 FACE=3D"Tahoma">&quot;Verlassen des =
> Verzeichnisses&quot; =3D &quot;Leaving directory&quot;</FONT> </P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">I did anything else correct. As soon =
> as I disable anything under SCSI except the general &quot;SCSI =
> support&quot; the kernel compiles and runs fine with PXES.</FONT></P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">Problem then is, that I cannot use =
> USB-Storage devices.</FONT>
> 
> <BR><FONT SIZE=3D2 FACE=3D"Tahoma">From the modules under =
> ...2.4.20-12pxes/kernel/drivers/scsi in PXES 0.9 I see there are:</FONT>
> 
> <BR><FONT SIZE=3D2 FACE=3D"Tahoma">ide-scsi.o</FONT>
> 
> <BR><FONT SIZE=3D2 FACE=3D"Tahoma">scsi_mod.o</FONT>
> 
> <BR><FONT SIZE=3D2 FACE=3D"Tahoma">sd_mod.o</FONT> </P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">scsi_mod.o is the general SCSI =
> support. sd_mod.o however is the &quot;SCSI disk support&quot; which =
> doesn't want to compile. (I didn't find out so far how ide-scsi.o is be
> = compiled)</FONT></P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">Can anyone give me a hint - or can you
> = have a look at your current config Diego if the one provided with PXES
> =
> 0.9 is the wrong one?</FONT></P>
> 
> <P><FONT SIZE=3D2 FACE=3D"Tahoma">Thanks a lot in advance,</FONT>
> 
> <BR><FONT SIZE=3D2 FACE=3D"Tahoma">Sascha </FONT> </P>
> 
> </BODY>
> </HTML>
> ------_=_NextPart_001_01C5079C.64C947D4--
> 
> 
> 
> --__--__--
> 
> _______________________________________________
> pxes-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/pxes-devel
> 
> 
> End of pxes-devel Digest
> 
> 
> -------------------------------------------------------
> This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
> Tool for open source databases. Create drag-&-drop reports. Save time
> by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
> Download a FREE copy at http://www.intelliview.com/go/osdn_nl
> _______________________________________________
> pxes-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/pxes-devel
signature.asc (application/pgp-signature, 189 B) 
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (GNU/Linux)

iD8DBQBB/58VlPY0gYfhm/IRAmNNAJ0fuHqNJ7nbsGrUFgzNRXxapl6L8ACfRbx/
1bdsg628lBnEMccrNToyFOI=
=bqTE
-----END PGP SIGNATURE-----
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.