RE: Default images with C3 gigapro processor?
"Mitch (WebCob)" <[email protected]> Fri, 1 Jul 2005 12:09:07 -0700
| Newsgroups | gmane.linux.pxes.devel |
|---|---|
| Message-ID | <[email protected]> |
Sorry Diego - don't understand your questions... it'd mid-way through loading the squash file with the ....... after it reads the config, the splash screen, the boot prompt - it's while loading the squash image - and then it just reboots - like a cold start - tests memory again - which leds should I be looking for a blink on? I've got a 32MB ram disk - same as with the other computer. I tried removing all my other config directives for session type, video mode etc. Running out to a metting - back in a couple hours - thanks for your help! m > -----Original Message----- > From: [email protected] [mailto:pxes-devel- > [email protected]] On Behalf Of Diego Torres Milano > Sent: July 1, 2005 12:11 PM > To: PXES devel > Subject: RE: [pxes-devel] Default images with C3 gigapro processor? > > Is this before the first PXES message ? > Do you get blinking leds ? > > On Fri, 2005-07-01 at 15:39, Mitch (WebCob) wrote: > > Sorry to nag – didn’t see any comment on this – any thoughts? > Thanks! Happy > > Canada Day! > > > > ________________________________________ > > From: [email protected] > > [mailto:[email protected]] On Behalf Of Mitch > (WebCob) > > Sent: June 29, 2005 10:10 PM > > To: [email protected] > > Subject: [pxes-devel] Default images with C3 gigapro processor? > > > > ECS – EVEM systems > > - C3 Gigapro (PIII equivalent) > > - 128MB ram > > - Realtek RTL8139 > > - VIA Tech VT8361/VT8601 Graphics Controller Driver for 800x600 & > 1024x768 > > > > I’ve changed nothing in my setup except the MAC in the dhcpd config. > Booting > > from this station gets about ¼ the way through reading the squash file > > (after config, after vmlinuz) and it reboots… > > > > My ramdisk is set to 32mb (leaving over 64mb free even considering some > > shared graphics ram… > > > > Does this need a custom build? > > > > Craig offered, and I thought I might not need it – will that possibly > fix > > this problem? Any advice to him on my behalf? > > > > Thanks! > > > > m/ > > > > > > > > ------------------------------------------------------- > > SF.Net email is sponsored by: Discover Easy Linux Migration Strategies > > from IBM. Find simple to follow Roadmaps, straightforward articles, > > informative Webcasts and more! Get everything you need to get up to > > speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id492&opÌk > > _______________________________________________ > > pxes-devel mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/pxes-devel > -- > Diego Torres Milano <[email protected]> > PXES Universal Linux Thin Client > http://pxes.sf.net > > > > ------------------------------------------------------- > SF.Net email is sponsored by: Discover Easy Linux Migration Strategies > from IBM. Find simple to follow Roadmaps, straightforward articles, > informative Webcasts and more! Get everything you need to get up to > speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id492&op=ick > _______________________________________________ > pxes-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/pxes-devel ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id492&op=click