Re: Suggest me a cost effective SATA SSD?

o1bigtenor <[email protected]>
Newsgroups gmane.linux.raid
Message-ID <CAPpdf5-+uD7fk-h5RR57PfJybku01CxXZvRx6mFE16L4duTyKQ@mail.gmail.com>
On Wed, Apr 29, 2026 at 6:09 PM Andy Smith <[email protected]> wrote:
>
> Hi,
>
> I've inherited a system with a pair of these:
>
> Model Family:     Crucial/Micron Client SSDs
> Device Model:     CT4000BX500SSD1
> User Capacity:    4,000,787,030,016 bytes [4.00 TB]
>
> Their write performance is terrible. Struggling to get 20MB/s sequential
> write. Their TBW count is low so it's not an issue of excessive write
> cycles. I've searched around and established they are just really bad
> SSDs. They also don't support SMART self-tests, which seems like a
> really cheap thing to do.
>
> I'm further confident that the problem lies with these SSDs because
> there is a pair of much better SSDs in there and they perform as I would
> expect. However, the use case for this storage is for lower cost so it's
> not an option to just buy more of those.
>
> So, could anyone suggest a decent low end (consumer/prosumer market) SSD
> model that is known to work well without terrible firmware bugs under
> Linux, preferably with power loss protection? Low write endurance is
> fine. Capacity of 4TB ideally.
>
I would suggest that power loss protection be sought using a UPS - - - imo a
better idea.

HTH
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.