[PATCH v2] md/raid5: protect bitmap batch counters aka seq_flush/seq_write consistency

From: Chen Cheng <[email protected]>

kcsan detect race :
- raid5d() closes the current bitmap batch by updating
	conf->seq_flush under conf->device_lock.
- __add_stripe_bio() read conf->seq_flush without that
	lock when assigning sh->bm_seq.

so, protect seq_flush/seq_write consistency for multiple CPUs by
READ_ONCE()/WRITE_ONCE() under the path without held device_lock.

re-explain the stripe batch sequence number update flow:
1. sh->bm_seq declare which batch number the stripe belongs to
   when perform bitmap-related write.
	==> bm_seq = seq_flush+1

2. stripe be handled,
	* if sh->bm_seq - conf->seq_write > 0, means the
	  batch stripes **newer than** the last written
	  batch, it cannot proceed yet, queued on bitmap_list.
	* otherwise , has already proceed.

3. raid5d() `++seq_flush` to closes the current batch, means
	* no more stripes join that old batch
	* just-closed batch ready to write-out to disk

4. raid5d() calls bitmap hooks unplug() or writeout, then,
   `++seq_write` to the same as bm_seq.

- seq_flush - for producer, to close batches.
- seq_write - for consumer, the checkpoint number.

the report:
====================================
BUG: KCSAN: data-race in __add_stripe_bio / raid5d

write to 0xffff88ba5625d470 of 4 bytes by task 82401 on cpu 0:
 raid5d+0x1d9/0xba0
 [.....]

read to 0xffff88ba5625d470 of 4 bytes by task 82421 on cpu 8:
 __add_stripe_bio+0x332/0x400
 raid5_make_request+0x6ac/0x2930
 md_handle_request+0x4a2/0xa40
 md_submit_bio+0x109/0x1a0
 __submit_bio+0x2ec/0x390
 [.....]

v1 -> v2:
- remove WRITE_ONCE(conf->seq_write) in held device_lock path.
- remove READ_ONCE(conf->seq_flush) in held device_lock path.

Signed-off-by: Chen Cheng <[email protected]>
---
 drivers/md/raid5.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index a320b71d7117..b2c5a1930841 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3536,11 +3536,11 @@ static void __add_stripe_bio(struct stripe_head *sh, struct bio *bi,
 	pr_debug("added bi b#%llu to stripe s#%llu, disk %d, logical %llu\n",
 		 (*bip)->bi_iter.bi_sector, sh->sector, dd_idx,
 		 sh->dev[dd_idx].sector);
 
 	if (conf->mddev->bitmap && firstwrite && !sh->batch_head) {
-		sh->bm_seq = conf->seq_flush+1;
+		sh->bm_seq = READ_ONCE(conf->seq_flush) + 1;
 		set_bit(STRIPE_BIT_DELAY, &sh->state);
 	}
 }
 
 /*
@@ -5827,11 +5827,11 @@ static void make_discard_request(struct mddev *mddev, struct bio *bi)
 			md_write_inc(mddev, bi);
 			sh->overwrite_disks++;
 		}
 		spin_unlock_irq(&sh->stripe_lock);
 		if (conf->mddev->bitmap) {
-			sh->bm_seq = conf->seq_flush + 1;
+			sh->bm_seq = READ_ONCE(conf->seq_flush) + 1;
 			set_bit(STRIPE_BIT_DELAY, &sh->state);
 		}
 
 		set_bit(STRIPE_HANDLE, &sh->state);
 		clear_bit(STRIPE_DELAYED, &sh->state);
@@ -6877,16 +6877,17 @@ static void raid5d(struct md_thread *thread)
 			clear_bit(R5_DID_ALLOC, &conf->cache_state);
 
 		if (
 		    !list_empty(&conf->bitmap_list)) {
 			/* Now is a good time to flush some bitmap updates */
-			conf->seq_flush++;
+			int seq = conf->seq_flush + 1;
+			WRITE_ONCE(conf->seq_flush, seq);
 			spin_unlock_irq(&conf->device_lock);
 			if (md_bitmap_enabled(mddev, true))
 				mddev->bitmap_ops->unplug(mddev, true);
 			spin_lock_irq(&conf->device_lock);
-			conf->seq_write = conf->seq_flush;
+			conf->seq_write = seq;
 			activate_bit_delay(conf, conf->temp_inactive_list);
 		}
 		raid5_activate_delayed(conf);
 
 		while ((bio = remove_bio_from_retry(conf, &offset))) {
-- 
2.54.0