Re: [PATCH 0/8] md/raid5: scalability and rebuild-path improvements

Hi Yu Kuai,

Thanks again for the review, and in particular for:

> I can accept make those values configurable, but not direct
> modifications.

I've reworked the tunables along exactly those lines and will send them as
a separate, self-contained series, "md/raid5: size stripe-cache and worker
tuning from the hardware".

Rather than raising any fixed constant, each value now derives a default
from the hardware and stays overridable:

  - the stripe-cache hash lock count (was a fixed 8) is sized from the CPU
    count, clamped to 8..32;
  - the stripe_cache_size ceiling (was a fixed 32768) scales with memory,
    but never drops below 32768;
  - the initial stripe_cache_size (was a fixed 256) scales gently with
    memory, 256..4096;
  - the default group_thread_cnt (was 0, i.e. single-threaded) is derived
    from the CPU count (half the online CPUs per NUMA node, capped);
  - the stripe batch size (was a fixed 8) is exposed as a parameter.

Ahead of those, the series opens with a one-line prerequisite fix:
alloc_thread_groups() sizes the per-node worker_groups[] array by
num_possible_nodes() but indexes it by cpu_to_node(), so a sparse NUMA node
map can index off the end -- reachable once the worker-group default (the
last patch) is on.  It is Fixes:-tagged and can be taken on its own.

The key point for the consumer-NAS concern you raised: each default only
rises on hardware that can back it -- the lock and worker counts scale with
the core count, the cache sizes with RAM -- so a genuinely small system (a
few cores and a few GB) keeps today's values and footprint. And each one is
overridable via a module parameter (group_thread_cnt also via its existing
sysfs attribute), including all the way back to today's behaviour. So nothing is
imposed; the default simply tracks the machine instead of a constant, and
a wide array on a large host no longer needs a recompile or manual
per-array tuning to use the memory and cores it has.

And on performance -- on real NVMe this time, not a ramdisk: on a 16-disk
raid6 array (a 32-vCPU / 16-core host, steady state, interleaved runs) the
hardware-derived defaults run 2.1-3.2x the stock defaults (4K random write
~39k -> ~100k IOPS), essentially all of it from patch 6 turning on the
worker groups.  Patches 2-5 (the cache and lock sizing) are
throughput-neutral on real SSD, as you'd expect -- they earn their place as
configurability and sane defaults, not a speed claim.  And there is no
regression at the small end: a 4-CPU box derives 2 workers and is never
slower on any workload, and a box with two or fewer CPUs derives 0 and is
byte-for-byte unchanged.

It has been through KASAN + lockdep + DEBUG_LIST on RAID5
(create/rebuild/scrub, plus the bitmap add/remove that drives the
lock-all-hash-locks quiesce path), at both the derived defaults and pinned
values including nr_stripe_hash_locks=32.

The two unrelated parts of the original series -- the type-widening /
correctness fixes and the resync/recovery dispatch changes -- I'll send as
their own small series, as discussed.

Thanks,

2026年7月5日(日) 19:56 yu kuai <[email protected]>:
>
> Hi,
>
> 在 2026/6/24 23:54, Hiroshi Nishida 写道:
> > This series collects small, individually low-risk md/raid5 changes for
> > large, many-core, many-disk arrays.  Their common theme is reducing
> > per-stripe and stripe-cache contention, so the benefit appears mainly
> > when the raid5 stripe-handling worker threads are in use
> > (group_thread_cnt > 0); at the default group_thread_cnt = 0 (a single
> > handling thread) the series is essentially neutral.
> >
> >   - patches 1-3 remove signed arithmetic from a hot-path divisor, lift an
> >     arbitrary stripe-cache size cap, and widen a badblock length argument
> >     that currently truncates large ranges;
> >   - patch 4 raises NR_STRIPE_HASH_LOCKS (8 -> 32) to spread stripe-hash
> >     contention on high core-count systems;
> >   - patches 5 and 8 reduce per-stripe overhead in the resync/recovery
> >     path and bound the share of the stripe cache a rebuild may hold while
> >     user I/O is competing;
> >   - patch 6 allocates each worker group's array on its own NUMA node;
> >   - patch 7 raises MAX_STRIPE_BATCH (8 -> 32).
> >
> > Measured effect, treatment vs baseline, % change in mean IOPS (N=3),
> > swept over group_thread_cnt (RAID6 4+2, 22-core host, ramdisk members):
>
> Testing with ramdisk does serve as a useful reference, but it does not reflect
> real world usage.
>
> >
> >    workload                       gtc=0   gtc=2   gtc=4   gtc=8
> >    random 4K write (RMW)          +4.2%   +8.1%  +17.4%   +6.5%
> >    DB mixed 75/25 8K              +0.4%   +4.2%  +10.3%   +4.7%
> >    high-concurrency 70/30 4K      +3.9%   +1.2%  +10.0%   +0.2%
> >    OLTP 70/30 16K                 -0.3%   +4.7%  +10.1%   +9.3%
> >    partial-stripe write 8K        +1.1%   +4.8%  +11.2%  +14.2%
>
> With a quick review I saw many static configurations is changed, I agree
> these changes can improve arrays with ssd/nvme and a system with large
> memory available. However, we already tested with hdd and about 8G memory
> available, these changes will not improve performance at all, with the
> extra memory overhead.
>
> I can accept make those values configurable, but not direct modifications.
> As validation is required for numerous scenarios. Memory resources are precious
> especially for most consumer NAS devices.
>
> >
> > At the default single handling thread (group_thread_cnt = 0) the series is
> > neutral (no regression).  As worker threads are added the gain grows,
> > peaking broadly around group_thread_cnt = 4 at roughly +10-17% across the
> > whole mix; at gtc = 8 the write-heavy workloads keep gaining while the
> > read-heavy high-concurrency case has saturated.  (Per-run cv was <1%
> > except the random-write test, ~5-9%, from a cold first run.)
> >
> > These numbers are on a ramdisk, which removes device latency and so
> > overstates the CPU-side contention effect relative to a real device;
> > they show the direction and the group_thread_cnt dependence, not an
> > absolute speedup.  The stripe-hash/batch patches (4, 7) and the cache cap
> > (2) drive this; patch 6 only matters on multi-socket systems (not
> > exercised above) and patches 5/8 act on the resync/recovery path rather
> > than this steady-state workload.
> >
> > Reproduction (stock mdadm + fio):
> >    mdadm --create /dev/md0 --level=6 --raid-devices=6 --chunk=512 \
> >          --assume-clean <6 members>
> >    echo 16384 > /sys/block/md0/md/stripe_cache_size
> >    echo N     > /sys/block/md0/md/group_thread_cnt      # N = 0,2,4,8
> >    fio --filename=/dev/md0 --direct=1 --ioengine=libaio --group_reporting \
> >        --time_based --runtime=15 --name=w <per-workload opts>:
> >      random write   : --rw=randwrite              --bs=4k  --numjobs=4  --iodepth=32
> >      DB mixed       : --rw=randrw --rwmixread=75  --bs=8k  --numjobs=8  --iodepth=16
> >      high-concur.   : --rw=randrw --rwmixread=70  --bs=4k  --numjobs=16 --iodepth=8
> >      OLTP           : --rw=randrw --rwmixread=70  --bs=16k --numjobs=6  --iodepth=16
> >      partial-stripe : --rw=randwrite              --bs=8k  --numjobs=4  --iodepth=32
> >
> > Each patch stands on its own; I am happy to drop or defer any that is not
> > justified on its own merit.
> >
> > Functional testing on RAID5 and RAID6: create, fail a member, rebuild
> > onto a spare / re-add, full data read-back verified, and scrub
> > ("check") reporting mismatch_cnt == 0.  The series was also exercised
> > with KASAN and lockdep enabled -- including heavy group_thread_cnt
> > churn on a multi-node setup to stress the per-NUMA-node worker
> > allocation and the raid5_quiesce hash-lock-all path -- with no reports.
> >
> > Hiroshi Nishida (8):
> >    md: change chunk_sectors and stripe cache counts to unsigned int
> >    md/raid5: raise stripe cache limit from 32768 to 262144
> >    md: widen badblock sectors param from int to sector_t
> >    md/raid5: raise NR_STRIPE_HASH_LOCKS from 8 to 32
> >    md/raid5: submit a window of stripes during resync/recovery
> >    md/raid5: allocate worker groups per NUMA node
> >    md/raid5: raise MAX_STRIPE_BATCH from 8 to 32
> >    md/raid5: reserve stripe cache for user I/O during rebuild
> >
> >   drivers/md/md.c    |   4 +-
> >   drivers/md/md.h    |  10 ++--
> >   drivers/md/raid5.c | 129 ++++++++++++++++++++++++++++++++-------------
> >   drivers/md/raid5.h |  33 ++++++++----
> >   4 files changed, 121 insertions(+), 55 deletions(-)
> >
> > base-commit: 55b77337bdd088c77461588e5ec094421b89911b
> >
> --
> Thanks,
> Kuai



-- 
Hiroshi Nishida
[email protected]