Re: 回复： 回复： RTAI insmod Mod ule Error

Can you repeat the tests in testsuite? I see you are using a single CPU 
machine, have you compiled the kernel as single processor (UP)? Have you 
kept the  ipipe legacy option in the kernel disabled?
Paolo

On 05/11/2017 11:17 AM, 嘉鑫 wrote:
> That's the problem confuse me a lot, all right ,thank you!
>
> ------------------ 原始邮件 ------------------
> *发件人:* "Paolo Mantegazza" <[email protected]>;
> *发送时间:* 2017年5月11日(星期四) 17:11
> *收件人:* "嘉鑫" <[email protected]>;
> *抄送:* "rtai" <[email protected]>;
> *主题:* Re: 回复： 回复： [Rtai] RTAI insmod Module Error
>
>
> Since rtai_hal.ko is the first module loaded for whatever you di with 
> RTAI and the tests run, I do not know what to say more.
>
> Paolo
>
> On 05/11/2017 10:33 AM, 嘉鑫 wrote:
>> I tried that way,it's still not work!
>>
>> ------------------ 原始邮件 ------------------
>> *发件人:*��"Paolo Mantegazza" <[email protected]>;
>> *发送时间:*��2017年5月11日(星期四) 16:29
>> *收件人:*��"嘉鑫" <[email protected]>;"rtai" <[email protected]>;
>> *主题:*��Re: 回复： 回复： [Rtai] RTAI insmod Module Error
>>
>>
>> Do not carry hot any test. Just insert rtai_hal.ko after a fresh 
>> reboot.���� It must be the very first thing you do.
>> Paolo
>>
>> On 05/11/2017 09:40 AM, 嘉鑫 wrote:
>>> The test work well after rebooting the system, but once I insmod 
>>> rtai_hal.ko, the terminal crashed!
>>>
>>> ------------------ 原始邮件 ------------------
>>> *发件人:*����"Paolo Mantegazza" <[email protected]>;
>>> *发送时间:*����2017年5月11日(星期四) 15:30
>>> *收件人:*����"嘉鑫" <[email protected]>;
>>> *抄送:*����"rtai" <[email protected]>;
>>> *主题:*����Re: 回复： 回复： [Rtai] RTAI insmod Module Error
>>>
>>>
>>> If rtai_hal.ko was not OK , the test that work should have failed. 
>>> Does it happens even after a fresh system boot?
>>> PAolo
>>>
>>> On 05/11/2017 03:45 AM, 嘉鑫 wrote:
>>>> Sorry to bother you again!
>>>> While I insmod rtai_hal.ko, the terminal even the system crashed, I 
>>>> cannot input anything into the terminal ,I mean it's stuck here! 
>>>> ��������it confused me a lot!
>>>> ��������Wish you can help me! many thanks!
>>>>
>>>> ------------------��������原始邮件��������------------------
>>>> *发件人:*��������"Paolo Mantegazza";<[email protected]>;
>>>> *发送时间:*��������2017年5月10日(星期三) 晚上6:02
>>>> *收件人:*��������"嘉鑫"<[email protected]>;
>>>> *主题:*��������Re: 回复： [Rtai] RTAI insmod Module Error
>>>>
>>>> On 05/10/2017 11:15 AM, 嘉鑫 wrote:
>>>>> But when I �������� sudo insmod /usr/realtime/modules/rtai_hal.ko, 
>>>>> ��������the system halted :just as the follows picture !
>>>> What do you mean with "the system halted"?
>>>> Paolo
>>>>> ��������
>>>>>
>>>>>
>>>>> ------------------��������原始邮件��������------------------
>>>>> *发件人:*��������"Paolo Mantegazza";<[email protected]>;
>>>>> *发送时间:*��������2017年5月10日(星期三) 下午4:51
>>>>> *收件人:*��������"嘉鑫"<[email protected]>; "rtai"<[email protected]>;
>>>>> *主题:*��������Re: [Rtai] RTAI insmod Module Error
>>>>>
>>>>> "All test In kernel and user below testsuite works very well, ..." 
>>>>> means that " insmod rtai_hal.ko" works, they will not "work very 
>>>>> well" otherwise.
>>>>> There is something I cannot understand.
>>>>>
>>>>> Paolo.
>>>>>
>>>>> On 05/10/2017 10:26 AM, 嘉鑫 wrote:
>>>>>> Hi All,
>>>>>> I am using RTAI 4.0 with linux kernel (3.5.7),after recompile the 
>>>>>> kernel and RTAI,reboot the PC with new RTAI image，
>>>>>> All test In kernel and user below testsuite works very well, but 
>>>>>> when I insmod rtai_hal.ko module,,The system halted,
>>>>>> I don't know why,is there anything I missed out during the kernel 
>>>>>> or rtai configuration stage or something else?
>>>>>>
>>>>>> Many thanks!
>>>>>> rjx.
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Rtai mailing list
>>>>>> [email protected]
>>>>>> https://mail.rtai.org/cgi-bin/mailman/listinfo/rtai
>>>>>
>>>>>
>>>>
>>>
>>
>

_______________________________________________
Rtai mailing list
[email protected]
https://mail.rtai.org/cgi-bin/mailman/listinfo/rtai