Re: 回复： 回复： RTAI insmod Mod ule Error

Since rtai_hal.ko is the first module loaded for whatever you di with 
RTAI and the tests run, I do not know what to say more.

Paolo

On 05/11/2017 10:33 AM, 嘉鑫 wrote:
> I tried that way,it's still not work!
>
> ------------------ 原始邮件 ------------------
> *发件人:* "Paolo Mantegazza" <[email protected]>;
> *发送时间:* 2017年5月11日(星期四) 16:29
> *收件人:* "嘉鑫" <[email protected]>;"rtai" <[email protected]>;
> *主题:* Re: 回复： 回复： [Rtai] RTAI insmod Module Error
>
>
> Do not carry hot any test. Just insert rtai_hal.ko after a fresh 
> reboot.�� It must be the very first thing you do.
> Paolo
>
> On 05/11/2017 09:40 AM, 嘉鑫 wrote:
>> The test work well after rebooting the system, but once I insmod 
>> rtai_hal.ko, the terminal crashed!
>>
>> ------------------ 原始邮件 ------------------
>> *发件人:*��"Paolo Mantegazza" <[email protected]>;
>> *发送时间:*��2017年5月11日(星期四) 15:30
>> *收件人:*��"嘉鑫" <[email protected]>;
>> *抄送:*��"rtai" <[email protected]>;
>> *主题:*��Re: 回复： 回复： [Rtai] RTAI insmod Module Error
>>
>>
>> If rtai_hal.ko was not OK , the test that work should have failed. 
>> Does it happens even after a fresh system boot?
>> PAolo
>>
>> On 05/11/2017 03:45 AM, 嘉鑫 wrote:
>>> Sorry to bother you again!
>>> While I insmod rtai_hal.ko, the terminal even the system crashed, I 
>>> cannot input anything into the terminal ,I mean it's stuck here! 
>>> ����it confused me a lot!
>>> ����Wish you can help me! many thanks!
>>>
>>> ------------------����原始邮件����------------------
>>> *发件人:*����"Paolo Mantegazza";<[email protected]>;
>>> *发送时间:*����2017年5月10日(星期三) 晚上6:02
>>> *收件人:*����"嘉鑫"<[email protected]>;
>>> *主题:*����Re: 回复： [Rtai] RTAI insmod Module Error
>>>
>>> On 05/10/2017 11:15 AM, 嘉鑫 wrote:
>>>> But when I ���� sudo insmod /usr/realtime/modules/rtai_hal.ko, 
>>>> ����the system halted :just as the follows picture !
>>> What do you mean with "the system halted"?
>>> Paolo
>>>> ����
>>>>
>>>>
>>>> ------------------����原始邮件����------------------
>>>> *发件人:*����"Paolo Mantegazza";<[email protected]>;
>>>> *发送时间:*����2017年5月10日(星期三) 下午4:51
>>>> *收件人:*����"嘉鑫"<[email protected]>; "rtai"<[email protected]>;
>>>> *主题:*����Re: [Rtai] RTAI insmod Module Error
>>>>
>>>> "All test In kernel and user below testsuite works very well, ..." 
>>>> means that " insmod rtai_hal.ko" works, they will not "work very 
>>>> well" otherwise.
>>>> There is something I cannot understand.
>>>>
>>>> Paolo.
>>>>
>>>> On 05/10/2017 10:26 AM, 嘉鑫 wrote:
>>>>> Hi All,
>>>>> I am using RTAI 4.0 with linux kernel (3.5.7),after recompile the 
>>>>> kernel and RTAI,reboot the PC with new RTAI image，
>>>>> All test In kernel and user below testsuite works very well, but 
>>>>> when I insmod rtai_hal.ko module,,The system halted,
>>>>> I don't know why,is there anything I missed out during the kernel 
>>>>> or rtai configuration stage or something else?
>>>>>
>>>>> Many thanks!
>>>>> rjx.
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Rtai mailing list
>>>>> [email protected]
>>>>> https://mail.rtai.org/cgi-bin/mailman/listinfo/rtai
>>>>
>>>>
>>>
>>
>

_______________________________________________
Rtai mailing list
[email protected]
https://mail.rtai.org/cgi-bin/mailman/listinfo/rtai