RTAI 5.0.1 calibrate program: BUG: unable to handle kernel paging request at 00007ffe78e450f0
Vivian McPhail <[email protected]> Fri, 15 Sep 2017 13:45:50 +1200
| Newsgroups | gmane.linux.real-time.rtai |
|---|---|
| Message-ID | <CAGSp+B62YgBB6xR+DapYgxzwcXpMYBjSv-vsyvU0ow+sJQ-Kcg@mail.gmail.com> |
Dear list, I have an Intel i3 7100 dual core CPU system that reports itself as having 4 cores (hyperthreaded). I have patched the kernel (4.4.43) with rtai path from rtai-5.0.1 After make menuconfig in rtai-5.0.1 directory and selecting number of CPUs as 2 and leaving all else unchanged, after make && make install, I get the following: sc-qi4 /usr/realtime/testsuite/kern/latency # ./run * * * Type ^C to stop this application. * * insmod: ERROR: could not insert module /usr/realtime/modules/rtai_hal.ko: Operation not permitted ERROR: cannot load /usr/realtime/modules/rtai_hal.ko insmod: ERROR: could not insert module /usr/realtime/modules/latency_rt.ko: Unknown symbol in module ERROR: cannot load /usr/realtime/modules/latency_rt.ko Error opening /dev/rtf1 dmesg output: <snip> [ 235.688089] RTAI[hal]: RTAI CONFIGURED WITH LESS THAN NUM ONLINE CPUS. [ 235.727326] latency_rt: Unknown symbol nano2count (err 0) [ 235.727329] latency_rt: Unknown symbol rt_get_time (err 0) [ 235.727330] latency_rt: Unknown symbol rt_task_make_periodic (err 0) [ 235.727331] latency_rt: Unknown symbol rt_set_runnable_on_cpus (err 0) [ 235.727332] latency_rt: Unknown symbol start_rt_timer (err 0) [ 235.727333] latency_rt: Unknown symbol rt_task_delete (err 0) [ 235.727334] latency_rt: Unknown symbol rtf_put (err 0) [ 235.727336] latency_rt: Unknown symbol stop_rt_timer (err 0) [ 235.727336] latency_rt: Unknown symbol rtf_destroy (err 0) [ 235.727337] latency_rt: Unknown symbol rt_get_cpu_time_ns (err 0) [ 235.727338] latency_rt: Unknown symbol rt_linux_use_fpu (err 0) [ 235.727340] latency_rt: Unknown symbol rt_set_oneshot_mode (err 0) [ 235.727341] latency_rt: Unknown symbol rtf_create (err 0) [ 235.727342] latency_rt: Unknown symbol rt_task_init (err 0) [ 235.727343] latency_rt: Unknown symbol count2nano (err 0) [ 235.727344] latency_rt: Unknown symbol rt_set_periodic_mode (err 0) [ 235.727346] latency_rt: Unknown symbol rt_task_wait_period (err 0) So I now make menuconfig and set number of CPUs to 4 sc-qi4 /usr/realtime/testsuite/kern/latency # ./run * * * Type ^C to stop this application. * * RTAI Testsuite - KERNEL space latency test (output data in nanoseconds) *** latency verification tool with RTAI own real time kernel tasks *** *** period = 100000 (ns), avrgtime = 1 (s) *** RTH| lat min| ovl min| lat avg| lat max| ovl max| overruns RTD| 0| 0| 1150| 160725| 160725| 73 RTD| 0| 0| 1187| 159405| 160725| 113 RTD| 0| 0| 1152| 165728| 165728| 152 RTD| 0| 0| 1162| 163048| 165728| 190 RTD| 0| 0| 1180| 164419| 165728| 231 RTD| 0| 0| 1165| 163306| 165728| 267 RTD| 0| 0| 1158| 165418| 165728| 304 RTD| 0| 0| 1172| 161802| 165728| 343 RTD| 0| 0| 1154| 161838| 165728| 380 RTD| 0| 0| 1162| 166058| 166058| 416 RTD| 0| 0| 1148| 162495| 166058| 453 RTD| 0| 0| 1272| 1259694| 1259694| 502 RTD| 0| 0| 1267| 1058307| 1259694| 549 RTD| 0| 0| 1226| 859009| 1259694| 594 RTD| 0| 0| 1191| 560218| 1259694| 635 RTD| 0| 0| 1188| 354817| 1259694| 676 RTD| 0| 0| 1156| 161124| 1259694| 713 RTD| 0| 0| 1165| 163014| 1259694| 752 RTD| 0| 0| 1183| 174834| 1259694| 792 RTD| 0| 0| 1159| 160292| 1259694| 830 ^CRTD| 0| 0| 1159| 160292| 1259694| 830 rmmod: ERROR: Module latency_rt is in use rmmod: ERROR: Module rtai_fifos is in use rmmod: ERROR: Module rtai_sched is in use rmmod: ERROR: Module rtai_hal is in use so then I try to run the calibration program: sc-qi4 /usr/realtime/calibration # ./calibrate Killed <snip> [ 959.562388] RTAI[hal]: mounted. ISOL_CPUS_MASK: 0. [ 959.562390] SYSINFO - # CPUs: 4, TIMER NAME: 'lapic', TIMER IRQ: 4354, TIMER FREQ: 115510001, CLOCK NAME: 'tsc', CLOCK FREQ: 3696332000, CPU FREQ: 3696332000, LINUX TIMER IRQ: 4354. [ 959.570145] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>. [ 959.570167] , kstacks pool size = 524288 bytes. [ 959.570168] RTAI[sched]: hard timer type/freq = lapic/115510001(Hz); timing: ONESHOT; linear timed lists. [ 959.570169] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3696332000 hz. [ 959.570170] RTAI[sched]: timer setup = 62 ns, resched latency = 0 ns. [ 959.570435] BUG: unable to handle kernel paging request at 00007ffe78e450f0 [ 959.570939] IP: [<ffffffffa01aa785>] rtai_lxrt_invoke+0xda5/0x1b30 [rtai_sched] [ 959.571356] PGD 46c2ae067 PUD 46c13a067 PMD 46a06c067 PTE 800000045d255067 [ 959.571772] Oops: 0001 [#1] SMP [ 959.572177] Modules linked in: rtai_sched(O+) rtai_hal(O) x86_pkg_temp_thermal sha256_generic igb [ 959.572605] CPU: 3 PID: 23288 Comm: calibrate Tainted: G O 4.4.43-rtai #15 [ 959.573030] Hardware name: Supermicro Super Server/X11SSA-F, BIOS 2.0a 03/07/2017 [ 959.573459] task: ffff88046a338bc0 ti: ffff88046c330000 task.ti: ffff88046c330000 [ 959.573896] RIP: 0010:[<ffffffffa01aa785>] [<ffffffffa01aa785>] rtai_lxrt_invoke+0xda5/0x1b30 [rtai_sched] [ 959.574349] RSP: 0018:ffff88046c333e90 EFLAGS: 00010206 [ 959.574796] RAX: 0000000000000407 RBX: ffff88046c333f58 RCX: 00007f16b91ce5c9 [ 959.575248] RDX: 0000000000000000 RSI: 00007ffe78e450f0 RDI: 0000000000407818 [ 959.575703] RBP: ffff88046c333f10 R08: 0000000000000000 R09: 000000006562b026 [ 959.576152] R10: 00007ffe78e450a8 R11: 0000000000000206 R12: 00007ffe78e450f0 [ 959.576605] R13: 0000000000407818 R14: 0000000000000000 R15: 0000000000000000 [ 959.577060] FS: 00007f16b9ab9700(0000) GS:ffff88047fd80000(0000) knlGS:0000000000000000 [ 959.577514] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 959.577961] CR2: 00007ffe78e450f0 CR3: 0000000469ede000 CR4: 00000000003406e0 [ 959.578411] I-pipe domain Linux [ 959.578852] Stack: [ 959.579293] 00000000ffffff9c 0000000000000010 0000000000000000 ffff880075760d80 [ 959.579757] ffff88046c333ec0 ffffffff81089ec2 ffff88046c333ed0 ffffffff8105f365 [ 959.580219] ffff88046c333f38 ffffffff810fad4f ffff880075760500 ffff88046c333f58 [ 959.580678] Call Trace: [ 959.581137] [<ffffffff81089ec2>] ? call_rcu_sched+0x12/0x20 [ 959.581597] [<ffffffff8105f365>] ? __put_cred+0x35/0x40 [ 959.582056] [<ffffffff810fad4f>] ? SyS_faccessat+0x1bf/0x200 [ 959.582519] [<ffffffffa01a8876>] lxrt_intercept_syscall+0xb6/0x180 [rtai_sched] [ 959.582983] [<ffffffff810ab022>] __ipipe_notify_syscall+0x12/0x20 [ 959.583448] [<ffffffff815a592c>] pipeline_syscall+0x9/0x16 [ 959.583916] Code: e1 07 89 c8 c1 f9 1f f7 ea c1 fa 05 29 ca 48 63 f2 31 d2 48 89 b3 68 11 00 00 e8 c7 68 00 00 48 89 83 58 11 00 00 e9 dd f4 ff ff <48> 8b 1e 8d 90 18 fc ff ff 83 fa 20 48 89 d9 0f 87 e2 04 00 00 [ 959.584963] RIP [<ffffffffa01aa785>] rtai_lxrt_invoke+0xda5/0x1b30 [rtai_sched] [ 959.585476] RSP <ffff88046c333e90> [ 959.586158] CR2: 00007ffe78e450f0 [ 959.589612] ---[ end trace a7110ad5d5eae434 ]--- [ 959.589649] ------------[ cut here ]------------ [ 959.589653] WARNING: CPU: 3 PID: 23288 at kernel/softirq.c:150 __local_bh_enable_ip+0x7c/0xa0() [ 959.589654] Modules linked in: rtai_sched(O+) rtai_hal(O) x86_pkg_temp_thermal sha256_generic igb [ 959.589658] CPU: 3 PID: 23288 Comm: calibrate Tainted: G D O 4.4.43-rtai #15 [ 959.589659] Hardware name: Supermicro Super Server/X11SSA-F, BIOS 2.0a 03/07/2017 [ 959.589660] 0000000000000000 ffff88046c333b60 ffffffff811f4341 0000000000000000 [ 959.589661] ffffffff81727e51 ffff88046c333b98 ffffffff81044ad8 0000000000000200 [ 959.589663] ffffffff81828820 ffff880469f81180 0000000000000009 ffff880469f811e8 [ 959.589665] Call Trace: [ 959.589667] [<ffffffff811f4341>] dump_stack+0x96/0xc5 [ 959.589668] [<ffffffff81044ad8>] warn_slowpath_common+0x78/0xb0 [ 959.589670] [<ffffffff81044bc5>] warn_slowpath_null+0x15/0x20 [ 959.589671] [<ffffffff81047dbc>] __local_bh_enable_ip+0x7c/0xa0 [ 959.589673] [<ffffffff815a5485>] _raw_write_unlock_bh+0x15/0x20 [ 959.589674] [<ffffffff815a5499>] _raw_spin_unlock_bh+0x9/0x10 [ 959.589676] [<ffffffff810a64d8>] cgroup_exit+0x48/0x60 [ 959.589677] [<ffffffff8104628c>] do_exit+0x32c/0xa40 [ 959.589679] [<ffffffff8100632a>] oops_end+0x7a/0xa0 [ 959.589681] [<ffffffff8103a645>] no_context+0x135/0x370 [ 959.589682] [<ffffffff8103a98a>] __bad_area_nosemaphore+0x10a/0x220 [ 959.589684] [<ffffffff810d9ed5>] ? list_lru_add+0x15/0x50 [ 959.589685] [<ffffffff8103aaae>] bad_area_nosemaphore+0xe/0x10 [ 959.589686] [<ffffffff8103ad02>] __do_page_fault+0x82/0x370 [ 959.589688] [<ffffffff81104cd8>] ? terminate_walk+0xb8/0xd0 [ 959.589690] [<ffffffff8103b075>] do_page_fault+0x55/0x90 [ 959.589691] [<ffffffff815a7682>] page_fault+0x22/0x60 [ 959.589697] [<ffffffffa01aa785>] ? rtai_lxrt_invoke+0xda5/0x1b30 [rtai_sched] [ 959.589699] [<ffffffff81089ec2>] ? call_rcu_sched+0x12/0x20 [ 959.589700] [<ffffffff8105f365>] ? __put_cred+0x35/0x40 [ 959.589702] [<ffffffff810fad4f>] ? SyS_faccessat+0x1bf/0x200 [ 959.589705] [<ffffffffa01a8876>] lxrt_intercept_syscall+0xb6/0x180 [rtai_sched] [ 959.589706] [<ffffffff810ab022>] __ipipe_notify_syscall+0x12/0x20 [ 959.589707] [<ffffffff815a592c>] pipeline_syscall+0x9/0x16 [ 959.589708] ---[ end trace a7110ad5d5eae435 ]--- [ 959.589722] USERMODE CHECK: ERROR. [ 959.589723] USERMODE CHECK PROVIDED (ns): KernelLatency 0, UserLatency 0. [ 959.589724] FINAL CALIBRATION SUMMARY (ns): KernelLatency 0, UserLatency 0. [ 1036.125661] BUG: unable to handle kernel paging request at 00007ffed16a44d0 [ 1036.126181] IP: [<ffffffffa01aa785>] rtai_lxrt_invoke+0xda5/0x1b30 [rtai_sched] [ 1036.126700] PGD 46b8d4067 PUD 469e8a067 PMD 46a1f1067 PTE 80000004566c6067 [ 1036.127390] Oops: 0001 [#2] SMP [ 1036.127906] Modules linked in: latency_rt(O) rtai_fifos(O) rtai_sched(O) rtai_hal(O) x86_pkg_temp_thermal sha256_generic igb [ 1036.128446] CPU: 3 PID: 23428 Comm: calibrate Tainted: G D W O 4.4.43-rtai #15 [ 1036.128980] Hardware name: Supermicro Super Server/X11SSA-F, BIOS 2.0a 03/07/2017 [ 1036.129522] task: ffff88046ab68000 ti: ffff88046c09c000 task.ti: ffff88046c09c000 [ 1036.130071] RIP: 0010:[<ffffffffa01aa785>] [<ffffffffa01aa785>] rtai_lxrt_invoke+0xda5/0x1b30 [rtai_sched] [ 1036.130635] RSP: 0018:ffff88046c09fe90 EFLAGS: 00010206 [ 1036.131195] RAX: 0000000000000407 RBX: ffff88046c09ff58 RCX: 00007f90fb5305c9 [ 1036.131763] RDX: 0000000000000000 RSI: 00007ffed16a44d0 RDI: 0000000000407818 [ 1036.132327] RBP: ffff88046c09ff10 R08: 0000000000000000 R09: 000000006562b026 [ 1036.132894] R10: 00007ffed16a4488 R11: 0000000000000202 R12: 00007ffed16a44d0 [ 1036.133462] R13: 0000000000407818 R14: 0000000000000000 R15: 0000000000000000 [ 1036.134032] FS: 00007f90fbe1b700(0000) GS:ffff88047fd80000(0000) knlGS:0000000000000000 [ 1036.134605] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1036.135178] CR2: 00007ffed16a44d0 CR3: 000000046a1a6000 CR4: 00000000003406e0 [ 1036.135762] I-pipe domain Linux [ 1036.136342] Stack: [ 1036.136916] 00000000ffffff9c 0000000000000010 0000000000000000 ffff880469581e80 [ 1036.137512] ffff88046c09fec0 ffffffff81089ec2 ffff88046c09fed0 ffffffff8105f365 [ 1036.138111] ffff88046c09ff38 ffffffff810fad4f ffff880469e45180 ffff88046c09ff58 [ 1036.138708] Call Trace: [ 1036.139303] [<ffffffff81089ec2>] ? call_rcu_sched+0x12/0x20 [ 1036.139908] [<ffffffff8105f365>] ? __put_cred+0x35/0x40 [ 1036.140506] [<ffffffff810fad4f>] ? SyS_faccessat+0x1bf/0x200 [ 1036.141105] [<ffffffffa01a8876>] lxrt_intercept_syscall+0xb6/0x180 [rtai_sched] [ 1036.141715] [<ffffffff810ab022>] __ipipe_notify_syscall+0x12/0x20 [ 1036.142321] [<ffffffff815a592c>] pipeline_syscall+0x9/0x16 [ 1036.142919] Code: e1 07 89 c8 c1 f9 1f f7 ea c1 fa 05 29 ca 48 63 f2 31 d2 48 89 b3 68 11 00 00 e8 c7 68 00 00 48 89 83 58 11 00 00 e9 dd f4 ff ff <48> 8b 1e 8d 90 18 fc ff ff 83 fa 20 48 89 d9 0f 87 e2 04 00 00 [ 1036.144391] RIP [<ffffffffa01aa785>] rtai_lxrt_invoke+0xda5/0x1b30 [rtai_sched] [ 1036.145016] RSP <ffff88046c09fe90> [ 1036.145629] CR2: 00007ffed16a44d0 [ 1036.146237] ---[ end trace a7110ad5d5eae436 ]--- Thanks in advance. Vivian -- Vivian McPhail PhD Candidate Department of Physics University of Auckland _______________________________________________ Rtai mailing list [email protected] https://mail.rtai.org/cgi-bin/mailman/listinfo/rtai