Re: Help needed on keyboard reponse in RTLinux-3.2-rc1

Hi,

I have a similar problem.  I used to use an older RTLinux-3.2-rc1
(downloaded 8th Oct '04) with 2.4.24, RH9, and everything worked fine.  Now
I have downloaded the latest rc1 (9th Feb '05), and it will not work with
2.4.24 or 2.4.27 (exact same linux config as before).

After I built RTLinux, I tried the regression script, as I usually do, and
it fails on the second (rtl_time.o), sometimes third (rtl_sched.o) test.
Afterwards, whenever I press the backspace key at a fresh command line, the
system keeps beeping, in stead of beeping just once.  Also, when I try to
reboot, the system stops responding, and I have to hard reset.

Any clues would be helpful.

Diekie Huyzers


----- Original Message -----
From: "Ke Tang" <[email protected]>
To: <[email protected]>
Sent: Saturday, 12 February 2005 22:25
Subject: [Rtl] Help needed on keyboard reponse in RTLinux-3.2-rc1


> Hello, everyone.
>
> I just upgrade rtlinux-3.2-pre3 to rtlinux-3.2-rc1, and my linux
> kernel is 2.4.27 built on Red Hat 9.0. I have a strange problem on my
> rtlinux system now.
>
> Before I use "rtlinux start" to start rtlinux, if I press the some key
> (for example backspace) for some time, the system keeps beeping and
> never stops even if I release the key. The same problem exists both in
> text mode and in X-Windows enviorments. And when I choose "logout" in
> the X-Windows, the system has no response, unless I press the mouse.
> It's just like some slides. One click, one slide.
>
> But after I type "rtlinux start" to start rtlinux, everything is OK now.
>
> I have never had the same problem when I used rtlinux-3.2-pre3 before.
> Anyone else has the similar question or could tell me the possible
> solution?
>
> Thanks. Any responses will be appreciated.
>
> Regards,
>
> Ke Tang
> _______________________________________________
> Rtl mailing list
> [email protected]
> http://www2.fsmlabs.com/mailman/listinfo/rtl

_______________________________________________
Rtl mailing list
[email protected]
http://www2.fsmlabs.com/mailman/listinfo/rtl

This e-mail and any files transmitted with it are confidential and intended solely for
the use of the individual or entity to whom they are addressed. If you have received
this e-mail in error please notify the sender immediately by e-mail and delete this e-mail
from your system. Please note that any views or opinions presented in this e-mail are
solely those of the author and do not necessarily represent those of OTB.
Although OTB has taken reasonable precautions to ensure no viruses are present
in this e-mail, OTB cannot accept responsibility for any loss or damage arising from
the use of this e-mail or attachments.