Re: Problem with rtl_malloc

hello,

if you don't have it already, make sure you have a

bigphysarea=1024

option in your kernel boot line (in lilo.conf or grub's menu.lst)

the 1024 here is just an example, you will need to know how much memory 
to reserve for you application.

hope this helps.
jp

Qeltaras wrote:
> I use debian 2.2r3 with kernel linux 2.4.23 from kernel.org.
> I've installed rtlinux-3.2-rc1 without error or warning.
> 
> the regression test have all ok
> but when i start rtlinux with the command 
> bin/rtlinux start
> 
> I've this error:
> 
> rtl_malloc PANIC: Error reserving memory!!rtl_nalloc PANIC: Error
> reserving memory!!rtl_malloc PANIC: Error reserving memory!!
> Warning: loading /usr/rtlinux-3.2/modules/mbuff.o will taint the
> kernel: no license
> Warning: loading /usr/rtlinux-3.2/modules/psc.o will taint the kernel:
> non-GPL license - GPL v2
> /usr/rtlinux-3.2/modules/rtl_malloc.o: init_module: Operation not permitted
> /usr/rtlinux-3.2/modules/rtl_malloc.o: insmod
> /usr/rtlinux-3.2/modules/rtl_malloc.o failed
> Hint: insmod errors can be caused by incorrect module parameters,
> including invalid IO or IRQ parameters
> /usr/rtlinux-3.2/modules/rtl_malloc.o: init_module: Operation not permitted
> /usr/rtlinux-3.2/modules/rtl_malloc.o: insmod
> /usr/rtlinux-3.2/modules/rtl_malloc.o failed
> Hint: insmod errors can be caused by incorrect module parameters,
> including invalid IO or IRQ parameters
> /usr/rtlinux-3.2/modules/rtl_malloc.o: init_module: Operation not permitted
> /usr/rtlinux-3.2/modules/rtl_malloc.o: insmod
> /usr/rtlinux-3.2/modules/rtl_malloc.o failed
> Hint: insmod errors can be caused by incorrect module parameters,
> including invalid IO or IRQ parameters
> Warning: loading /usr/rtlinux-3.2/modules/rtsock.o will taint the
> kernel: non-GPL license - GPL v2
> 
> Scheme: (-) not loaded, (+) loaded
>   (+) mbuff
>   (+) psc
>   (+) rtl
>   (-) rtl_3c59x
>   (-) rtl_8139too
>   (+) rtl_fifo
>   (-) rtl_malloc
>   (+) rtl_mqueue
>   (+) rtl_posixio
>   (+) rtl_sched
>   (+) rtl_time
>   (+) rtsock
> 
> For the problem 
> 
> Can you help me to solve these problem?
> 
> Thanks 
>      Nicol@
> _______________________________________________
> Rtl mailing list
> [email protected]
> http://hq.fsmlabs.com/mailman/listinfo/rtl
> http:/www.rtlinux-gpl.org/
> 

-- 
J.P. Delport <[email protected]>
Optronics Group - CSIR Defencetek
Tel: +27(12)8413689 Fax: +27(12)8413453

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
MailScanner thanks transtec Computers for their support.

_______________________________________________
Rtl mailing list
[email protected]
http://hq.fsmlabs.com/mailman/listinfo/rtl
http:/www.rtlinux-gpl.org/