Re: Minifridge

  Well, I got power to the machine.
 The display says 5/333, and later ADP9200.  Video is a card.  I threw on an LK401 that's known good, and threw some power to it. The VGA displays blue with a white blinking cursor, no SRM prompt. I've tried CTRL-C, and have pulled the disks to see if SRM will interrupt. The screen periodically flips black for a second.

  I can't figure out how to get into this case. I've tried several things including a hammer and a drift.  If this was PC hardware I'd have already hit it with the plasma cutter.

 I can open the door on the front, but I see no heads of screws. The back is also devoid of  As before, I can't drive any part of the sheetmetal back more than 1/8 of an inch.

-----Original Message-----

From:  Maurice Hilarius <[email protected]>
Subj:  Re: Minifridge
Date:  Sat Aug 21, 2010 15:08
Size:  1K
To:  Linux on Alpha processors <[email protected]>

      On 8/21/2010 12:13 PM, Vesselin Kenashkov wrote: Permedia 2 (Elsa Gloria Synergy) works with both Tru64 and OpenVMS. Another one that works with both (older but maybe easier to find) is S3 trio64V or S3 trio64V+ (these can be found with 2mb vram). The latter one works with Linux as well, regarding the former one I can't remember did I ever tried it.
 
 Permedia 3 should also work (with VMS)... if you can find one for PCI...
  I f you get stuck in looking we still actually have examples of most of those kicking around here.
 
 
 
  -- 
 With our best regards,
 
 Maurice W. Hilarius         Telephone: 01-780-456-9771
 Hard Data Ltd.                FAX:          01-780-456-9772
 11060 - 166 Avenue         email:[email protected]
 Edmonton, AB, Canada      T5X 1Y3 
 
     --- message truncated ---