Re: Sharing files between Linux and Windows

"John G. Heim" <[email protected]>
Newsgroups gmane.linux.redhat.blinux.general
Organization University of Wisconsin-Madison
Message-ID <[email protected]>
I am pretty sure that on your linux machine, all you have to do is this:

sudo apt-get install samba

*sudo smbpasswd -a <username>*


That's all I did  on a fresh debian jessie machine and I was able to 
access my files in Win7. In Win7, press control+r to open a run dialog 
box. Type \\<hostname>\<username>. That will open a dialog box for 
mapping a share.  If you make your linux user ID and password match your 
Win7 user ID and password, you don't even have to enter those things. If 
they don't match, there is a link titled something like "Log in with a 
different user name and password". Sorry, I'd have to reboot into Win7 
again to get the exact title of the link.

But seriously, those 2 commands were all I had to do to access my files 
from my Win7 machine. If you want to modify the files on your linux 
machine, you have to edit /etc/samba/smb.conf on the linux machine. But 
for copying the files to your Win7 machine, I really think that is all 
you have to do.


On 07/06/2016 01:39 PM, John J. Boyer wrote:
> I tried to install a samba server on Windows. However, the Geek Squad
> agent who was helping said he didn't know enough to proceed. If I go to
> the Samba website, what should I do?
>
> Thanks,
> John
>
> On Wed, Jul 06, 2016 at 01:22:27PM -0400, Janina Sajka wrote:
>> Ditto. I've also only every used Samba for this.
>>
>> Note, however, that once you have Samba set up, you can perfectly access
>> the Windows folder from the Linux command line. Look at the man pages
>> for the following:
>>
>> smbclient
>> smbget
>>
>> Good luck!
>>
>> Janina
>>
>> John G Heim writes:
>>> I have always done this with samba.  I never found it particularly
>>> difficult. You do have to read/follow the instructions.
>>>
>>>
>>>
>>> On 07/05/2016 01:36 PM, Mark Peveto wrote:
>>>> I'll be interested in the answer to that question myself.  I've had some tell me I need to use samba to do that...I've never been able to make it work.
>>>>
>>>> Mark Peveto
>>>> Registered Linux user number 600552
>>>> Sent from F123 Visual using alpine 2.20.13
>>>>
>>>>
>>>> On Tue, 5 Jul 2016, John J. Boyer wrote:
>>>>
>>>>> I'm going to set up a folder called c:\share on my Windows machine. I
>>>>> want to set up a device on my Linux machine which is connected with this
>>>>> folder over my LAN. I know that this can be done, because I had
>>>>> something similar at one time. However, i'm not certain how to do it
>>>>> again. If I remember, it just took an entry in fstab and an entry in
>>>>> /dev. Thanks.
>>>>>
>>>>> John
>>>>>
>>>>> --
>>>>> John J. Boyer; President,
>>>>> AbilitiesSoft, Inc.
>>>>> Email: [email protected]
>>>>> Website: http://www.abilitiessoft.org
>>>>> Status: 501(C)(3) Nonprofit
>>>>> Location: Madison, Wisconsin USA
>>>>> Mission: To develop softwares and provide STEM services for people with
>>>>>            disabilities which are available at no cost.
>>>>>
>>>>> _______________________________________________
>>>>> Blinux-list mailing list
>>>>> [email protected]
>>>>> https://www.redhat.com/mailman/listinfo/blinux-list
>>>>>
>>>> _______________________________________________
>>>> Blinux-list mailing list
>>>> [email protected]
>>>> https://www.redhat.com/mailman/listinfo/blinux-list
>>> -- 
>>> --
>>> John G. Heim; [email protected]; sip://[email protected]
>>>
>>> _______________________________________________
>>> Blinux-list mailing list
>>> [email protected]
>>> https://www.redhat.com/mailman/listinfo/blinux-list
>> -- 
>>
>> Janina Sajka,	Phone:	+1.443.300.2200
>> 			sip:[email protected]
>> 		Email:	[email protected]
>>
>> Linux Foundation Fellow
>> Executive Chair, Accessibility Workgroup:	http://a11y.org
>>
>> The World Wide Web Consortium (W3C), Web Accessibility Initiative (WAI)
>> Chair, Accessible Platform Architectures	http://www.w3.org/wai/apa
>>
>> _______________________________________________
>> Blinux-list mailing list
>> [email protected]
>> https://www.redhat.com/mailman/listinfo/blinux-list

_______________________________________________
Blinux-list mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/blinux-list
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.