p8p1 ethernet won't connect to a network
"Doll, Margaret Ann" <[email protected]>
| Newsgroups | gmane.linux.redhat.general |
|---|---|
| Message-ID | <CAKhbxNn9Mg0UejCKbFavSt=mUNkHMxTfsGW-7SUrb-ymnu_Vwg@mail.gmail.com> |
I changed in the new server, but it does not make a network connection on one of the subnets at school. 1. Instead of using eth0 as the default connection, the system wants to use p8p1. I edited /etc/sysconf/network-scripts to change the device to eth0 and I took out the UUID line. ifcfg-p8p1 was renamed to p8p1-ifcfg. 2. My ifcfg-eth0 contains DEVICE="eth0" BOOTPROTO=static IPAddess=136.16.167.11 GATEWAY=136.16.167.1 DNS1=10.2.2.10 BROADCAST=136.16.167.255 NETMASK=255.255.255.0 HWADDR="00:22:19:2B:7C:CC" ONBOOT="yes" TYPE="Ethernet" When I restart the network, it says that eth0 is started. However, ifconfig shows no ip address for it. /var/log/messages contains deactivating device reason 40 Any ideas? Thanks -- redhat-list mailing list unsubscribe mailto:[email protected]?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list