Re: openldap 2.5.15 on Red Hat Enterprise Linux release 8.7 (Ootpa)
Mike Burger <[email protected]> Mon, 24 Jul 2023 18:34:25 +0000
| Newsgroups | gmane.linux.redhat.general |
|---|---|
| Message-ID | <01000189892e6213-d86f23c7-90af-44a6-a808-59cc25507257-000000@email.amazonses.com> |
On 2023-07-24 14:21, Kaushal Shriyan wrote: > Hi, > > I am trying to build > https://www.openldap.org/software/download/OpenLDAP/openldap-release/openldap-2.5.15.tgz > on Red Hat Enterprise Linux release 8.7 (Ootpa)# > > Is there a way to configure openldap on /etc directory for > configuration > files and generate systemctl openldap service unit file to start , stop > and > restart openldap service? > > ################################################################################################################################################ > ./configure --help > `configure' configures this package to adapt to many kinds of systems. > > Usage: ./configure [OPTION]... [VAR=VALUE]... > > To assign environment variables (e.g., CC, CFLAGS...), specify them as > VAR=VALUE. See below for descriptions of some of the useful variables. > > Defaults for the options are specified in brackets. > > Configuration: > -h, --help display this help and exit > --help=short display options specific to this package > --help=recursive display the short help of all the included > packages > -V, --version display version information and exit > -q, --quiet, --silent do not print `checking ...' messages > --cache-file=FILE cache test results in FILE [disabled] > -C, --config-cache alias for `--cache-file=config.cache' > -n, --no-create do not create output files > --srcdir=DIR find the sources in DIR [configure dir or > `..'] > > Installation directories: > --prefix=PREFIX install architecture-independent files in > PREFIX > [/usr/local] > --exec-prefix=EPREFIX install architecture-dependent files in > EPREFIX > [PREFIX] > > By default, `make install' will install all the files in > `/usr/local/bin', `/usr/local/lib' etc. You can specify > an installation prefix other than `/usr/local' using `--prefix', > for instance `--prefix=$HOME'. > > For better control, use the options below. > > Fine tuning of the installation directories: > --bindir=DIR user executables [EPREFIX/bin] > --sbindir=DIR system admin executables [EPREFIX/sbin] > --libexecdir=DIR program executables [EPREFIX/libexec] > --sysconfdir=DIR read-only single-machine data [PREFIX/etc] > --sharedstatedir=DIR modifiable architecture-independent data > [PREFIX/com] > --localstatedir=DIR modifiable single-machine data [PREFIX/var] > --libdir=DIR object code libraries [EPREFIX/lib] > --includedir=DIR C header files [PREFIX/include] > --oldincludedir=DIR C header files for non-gcc [/usr/include] > --datarootdir=DIR read-only arch.-independent data root > [PREFIX/share] > --datadir=DIR read-only architecture-independent data > [DATAROOTDIR] > --infodir=DIR info documentation [DATAROOTDIR/info] > --localedir=DIR locale-dependent data [DATAROOTDIR/locale] > --mandir=DIR man documentation [DATAROOTDIR/man] > --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE] > --htmldir=DIR html documentation [DOCDIR] > --dvidir=DIR dvi documentation [DOCDIR] > --pdfdir=DIR pdf documentation [DOCDIR] > --psdir=DIR ps documentation [DOCDIR] > > System types: > --build=BUILD configure for building on BUILD [guessed] > --host=HOST cross-compile to build programs to run on HOST > [BUILD] > --target=TARGET configure for building compilers for TARGET [HOST] > > Optional Features: > --disable-option-checking ignore unrecognized --enable/--with > options > --disable-FEATURE do not include FEATURE (same as > --enable-FEATURE=no) > --enable-FEATURE[=ARG] include FEATURE [ARG=yes] > --enable-debug enable debugging no|yes|traditional [yes] > --enable-dynamic enable linking built binaries with dynamic > libs > [auto] > --enable-syslog enable syslog support [auto] > --enable-ipv6 enable IPv6 support [auto] > --enable-local enable AF_LOCAL (AF_UNIX) socket support > [auto] > > SLAPD (Standalone LDAP Daemon) Options: > --enable-slapd enable building slapd [yes] > --enable-dynacl enable run-time loadable ACL support > (experimental) [no] > --enable-aci enable per-object ACIs (experimental) > no|yes|mod > [no] > --enable-cleartext enable cleartext passwords [yes] > --enable-crypt enable crypt(3) passwords [no] > --enable-spasswd enable (Cyrus) SASL password verification > [no] > --enable-modules enable dynamic module support [no] > --enable-rlookups enable reverse lookups of client hostnames > [no] > --enable-slapi enable SLAPI support (experimental) [no] > --enable-slp enable SLPv2 support [no] > --enable-wrappers enable tcp wrapper support [no] > > SLAPD Backend Options: > --enable-backends enable all available backends no|yes|mod > --enable-dnssrv enable dnssrv backend no|yes|mod [no] > --enable-ldap enable ldap backend no|yes|mod [no] > --enable-mdb enable mdb database backend no|yes|mod [yes] > --enable-meta enable metadirectory backend no|yes|mod [no] > --enable-asyncmeta enable asynchronous metadirectory backend > no|yes|mod [no] > --enable-null enable null backend no|yes|mod [no] > --enable-passwd enable passwd backend no|yes|mod [no] > --enable-perl enable perl backend no|yes|mod [no] > --enable-relay enable relay backend no|yes|mod [yes] > --enable-sock enable sock backend no|yes|mod [no] > --enable-sql enable sql backend no|yes|mod [no] > --enable-wt enable WiredTiger backend no|yes|mod [no] > > SLAPD Overlay Options: > --enable-overlays enable all available overlays no|yes|mod > --enable-accesslog In-Directory Access Logging overlay > no|yes|mod > [no] > --enable-auditlog Audit Logging overlay no|yes|mod [no] > --enable-autoca Automatic Certificate Authority overlay > no|yes|mod [no] > --enable-collect Collect overlay no|yes|mod [no] > --enable-constraint Attribute Constraint overlay no|yes|mod [no] > --enable-dds Dynamic Directory Services overlay no|yes|mod > [no] > --enable-deref Dereference overlay no|yes|mod [no] > --enable-dyngroup Dynamic Group overlay no|yes|mod [no] > --enable-dynlist Dynamic List overlay no|yes|mod [no] > --enable-homedir Home Directory Management overlay no|yes|mod > [no] > --enable-memberof Reverse Group Membership overlay no|yes|mod > [no] > --enable-otp OTP 2-factor authentication overlay > no|yes|mod > [no] > --enable-ppolicy Password Policy overlay no|yes|mod [no] > --enable-proxycache Proxy Cache overlay no|yes|mod [no] > --enable-refint Referential Integrity overlay no|yes|mod [no] > --enable-remoteauth Deferred Authentication overlay no|yes|mod > [no] > --enable-retcode Return Code testing overlay no|yes|mod [no] > --enable-rwm Rewrite/Remap overlay no|yes|mod [no] > --enable-seqmod Sequential Modify overlay no|yes|mod [no] > --enable-sssvlv ServerSideSort/VLV overlay no|yes|mod [no] > --enable-syncprov Syncrepl Provider overlay no|yes|mod [yes] > --enable-translucent Translucent Proxy overlay no|yes|mod [no] > --enable-unique Attribute Uniqueness overlay no|yes|mod [no] > --enable-valsort Value Sorting overlay no|yes|mod [no] > > SLAPD Password Module Options: > --enable-argon2 Argon2 password hashing module no|yes [no] > > LLOADD (Load Balancer Daemon) Options: > --enable-balancer enable load balancer no|yes|mod [no] > > Library Generation & Linking Options > --enable-static[=PKGS] build static libraries [default=yes] > --enable-shared[=PKGS] build shared libraries [default=yes] > --enable-versioning Enable versioned symbols in shared library > no|yes|auto [auto] > --enable-fast-install[=PKGS] > optimize for fast installation [default=yes] > --disable-libtool-lock avoid locking (might break parallel builds) > > Optional Packages: > --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] > --without-PACKAGE do not use PACKAGE (same as > --with-PACKAGE=no) > --with-subdir=DIR change default subdirectory used for installs > --with-cyrus-sasl with Cyrus SASL support [auto] > --with-systemd with systemd service notification support > [auto] > --with-fetch with fetch(3) URL support [auto] > --with-threads with threads library > auto|nt|posix|pth|lwp|manual > [auto] > --with-tls with TLS/SSL support auto|openssl|gnutls > [auto] > --with-yielding-select with implicitly yielding select [auto] > --with-mp with multiple precision statistics > auto|longlong|long|bignum|gmp [auto] > --with-odbc with specific ODBC support > iodbc|unixodbc|odbc32|auto [auto] > --with-argon2 with argon2 support library > auto|libsodium|libargon2 [auto] > --with-pic[=PKGS] try to use only PIC/non-PIC objects > [default=use > both] > --with-aix-soname=aix|svr4|both > shared library versioning (aka "SONAME") > variant > to > provide on AIX, [default=aix]. > --with-gnu-ld assume the C compiler uses GNU ld > [default=no] > --with-sysroot[=DIR] Search for dependent libraries within DIR (or > the > compiler's sysroot if not specified). > > See INSTALL file for further details. > > Some influential environment variables: > CC C compiler command > CFLAGS C compiler flags > LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a > nonstandard directory <lib dir> > LIBS libraries to pass to the linker, e.g. -l<library> > CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include > dir> if > you have headers in a nonstandard directory <include dir> > LT_SYS_LIBRARY_PATH > User-defined run-time library search path. > CPP C preprocessor > PKG_CONFIG path to pkg-config utility > PKG_CONFIG_PATH > directories to add to pkg-config's search path > PKG_CONFIG_LIBDIR > path overriding pkg-config's built-in search path > WT_CFLAGS C compiler flags for WT, overriding pkg-config > WT_LIBS linker flags for WT, overriding pkg-config > systemdsystemunitdir > value of systemdsystemunitdir for systemd, overriding > pkg-config > > Use these variables to override the choices made by `configure' or to > help > it to find libraries and programs with nonstandard names/locations. > > Report bugs to the package provider. > ################################################################################################################################################ > > Please guide me. Thanks in advance. Out of curiosity, is there a specific reason you're building from source, rather than installing the prebuild openldap RPM package that is available for YUM/DNF installation from Red Hat's rhel-8-for-x86_64-baseos-rpms repository? -- https://poplme.co/hash/lqQkxj0F/1/es "It's always suicide-mission this, save-the-planet that. No one ever just stops by to say 'hi' anymore." --Colonel Jack O'Neill, SG1 -- redhat-list mailing list unsubscribe mailto:[email protected]?subject=unsubscribe https://listman.redhat.com/mailman/listinfo/redhat-list