Re: Local priner problem

Hello,

Many thanks to Julius and Santiago. I will use your advice tomorrow at
the my lab and I report the results.

Best regards,
Radek


> Hello Radek, 
> 
> I have the same server as yours. The first time I tried to print
> locally I had the similar problems (jetpipe wasn't running).
> 
> 
> I solved this by installing the python-daemon package in the chroot. 
> I'm still unable to print to a printer connected to the thin client
> via the parallel port though.
> 
> 
> Hope this helps.
> 
> 
> ----
> Ing. Santiago Mera
> Droguería Uruguay S.A.
> Tel: (+598) 2408 7505 int. 264
> 
> 
> 
> 
> 
> ______________________________________________________________________
> From: "Radek Bursztynowski" <[email protected]>
> To: [email protected]
> Sent: Monday, March 4, 2013 1:21:19 PM
> Subject: [K12OSN] Local priner problem
> 
> 
> Hello All,
> 
> 
> Today I try the first time to use local printer connected to thin
> client, and no effect.
> 
> 
> My LTSP server is CentOS 6.3 x86_64.
> My local printer connected to thin client via USB is Samsung ML-2165.
> This printer connected to the server directly works very well.
> 
> 
> The first I checked is thin client sees this printer.
> Using Ctrl+F6 I switched to the shell and:
> # tail -f /var/log/messages
> I can see that printer is connected to /dev/usblt0
> I checked jetpipe:
> # ps aux | grep jetpipe
> 
> 
> and I can see:
> root  3463  0.0   0.0   760  pts/1  S+  14:49  0:00  grep jetpipe
> 
> 
> Thin client configuration in lts.conf:
> [E0:69:95:65:A1:EB]                # Nettop D510
>     LIKE                                   = CentOS
>     PRINTER_0_DEVICE          = "/dev/usblp0"
>     PRINTER_0_PORT             = 9100
>     PRINTER_TYPE                  = U
> 
> 
> Thin client receives from DHCP IP address 192.168.1.10
> # Netbook D510
>   host d510 {
>     option host-name "d510";
>     hardware ethernet    E0:69:95:65:A1:EB;
>     fixed-address 192.168.1.10;
> 
> 
>     ### LTSP 5
>     option root-path "192.168.1.230:/opt/ltsp/i386";
>     next-server 192.168.1.230;
>     filename        "/ltsp/i386/pxelinux.0";
>     ### Koniec LTSP 5
>   }
> 
> 
> Finally I added printer using system-config-printer:
> socket://192.168.1.10:9100
> 
> 
> And nothing.
> 
> 
> I checked archives this issue and I found this post:
> https://www.redhat.com/archives/k12osn/2012-September/msg00009.html
> 
> 
> Follow this advice I deleted old jetpipe from thin client chroot and I
> renamed p910nd in jetpipe.
> 
> 
> Still nothing. I can see the message that the printer could be not
> connected.
> 
> 
> What should I to do to use local printer.
> Any advice will be priceless.
> 
> 
> Best regards,
> Radek
> _______________________________________________
> K12OSN mailing list
> [email protected]
> https://www.redhat.com/mailman/listinfo/k12osn
> For more info see <http://www.k12os.org>
> 
> 
> _______________________________________________
> K12OSN mailing list
> [email protected]
> https://www.redhat.com/mailman/listinfo/k12osn
> For more info see <http://www.k12os.org>



_______________________________________________
K12OSN mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/k12osn
For more info see <http://www.k12os.org>