Printers was ---Re: Launch FF on start up
"me" <[email protected]>
| Newsgroups | gmane.linux.redhat.k12osn |
|---|---|
| Message-ID | <[email protected]> |
Hi Barry On Tue, 05 Mar 2013 13:16:39 -0600, Barry R Cisna wrote > Todd, > > In regards to your locally attached printer. > This is ltsp v5 you are using correct? believe so > > 1) If your client ends up with an ip address of 172.31.100.101 > >From the server can you do a,, > telnet 172.31.100.101 9100 > ,, and get a connect? > If you don't get this connect you will have to keep scraping,,until you > get this successful. > Actually I do not use the supplied address block. I have a DHCP server setup to work with the TC's ( 192.168...stuff ). When I was playing with the printers awhile back, I did try to telnet to'm without luck. The end result is it was easier and faster to use a couple of the extra TC's that I have. They are running XPe and I made them print servers. One even has three printers connected: 2 USB and 1 Parallel. Sure a dirty hack sorta, but it works and I don't have to jump through hoops to get K12 printers working and can move on to other things. > 2) What brand of printer is this? > Have you had it connected to the actual server and it works OK connected > locally to your k12linux server? Ithaca BankJet and PosJet; both USB and Parallel. Can't test the Parallel on the server as there is no port for that, but the USB ones did install and work just fine. todh > > Take Care, > Barry > > _______________________________________________ > K12OSN mailing list > [email protected] > https://www.redhat.com/mailman/listinfo/k12osn > For more info see <http://www.k12os.org> -- Todd Hackett Chief Bottle Washer PoBox 1168 Libby, MT 59923 406.293.3843 _______________________________________________ K12OSN mailing list [email protected] https://www.redhat.com/mailman/listinfo/k12osn For more info see <http://www.k12os.org>