Re: client booting linux stalls

hello Jushua,

thanks for letting me know.

*the routing problem was solved by editing the iptables manualy.

* I did put "em2" in /etc/ltsp/ltsp-server.conf before running the scripts.

* my original install was with epel, yesterday evening I updated with 
the other repo:

[root@centoshofkwartier ~]# yum repolist
Loaded plugins: fastestmirror, refresh-packagekit, security
Loading mirror speeds from cached hostfile
  * base: distrib-coffee.ipsl.jussieu.fr
  * extras: mirror.ovh.net
  * ltsp: ltsprepo.s3.amazonaws.com
  * updates: distrib-coffee.ipsl.jussieu.fr
repo id                        repo 
name                                  status
base                           CentOS-6 - 
Base                            6381
extras                         CentOS-6 - 
Extras                            12
ltsp                           LTSP - 
x86_64                                60


but something went wrong with the update,because my version is still:

[root@centoshofkwartier ~]# rpm -qa | grep ltsp
ltsp-server-5.4.5-20.el6.x86_64
ltspfs-1.1-7.el6.x86_64
ltsp-release-5-9.el6.noarch

* I then rebuilded with ltsp-build-client

but the problem with the green glare stays.
Everything 's on the screen, but there's this filter over it......

Maybe this can be solved by editing lts.conf.....

greetings, J




Op 04-06-13 20:46, Joshua Trimm schreef:
> Johan, I have 5.4.5-21 being pushed to the repo's today which should 
> fix the scripts to accept an interface regardless of its name.
>
> The reason NFS needs to be started manually is due to the RPM not 
> knowing which interface you will be using for the LTSP network. This 
> must be defined in /etc/ltsp/ltsp-server.conf before 
> ltsp-server-tweaks and ltsp-server-initialize are run.
> On 6/4/13 5:23 AM, Johan Vermeulen wrote:
>> Dear All,
>>
>> this is my experience with the install :
>>
>> version is ltsp-server-5.4.5-20.el6.x86_64 on Centos6.4.
>> installed with epel-repo.
>>
>> After starting nfs manualy like Barry and starting tftp manualy, I am 
>> able to boot a thinclient.
>>
>> But I'm facing these problems :
>>
>> *ltsp-server-tweaks hangs on " about to overwrite your firewall 
>> config" either with iptables on or off.
>> Probably because of that, laptops and workstations that are on the 
>> lan cannot reach the internet. This is my main concern.
>> Setting up nat manualy did not help.
>>
>> this is /etc/sysconfig/iptables :
>>
>> # Firewall configuration written by system-config-firewall
>> # Manual customization of this file is not recommended.
>> *nat
>> :PREROUTING ACCEPT [0:0]
>> :OUTPUT ACCEPT [0:0]
>> :POSTROUTING ACCEPT [0:0]
>> -A POSTROUTING -o eth+ -j MASQUERADE
>> -A POSTROUTING -o em2 -j MASQUERADE
>> COMMIT
>> *filter
>> :INPUT ACCEPT [0:0]
>> :FORWARD ACCEPT [0:0]
>> :OUTPUT ACCEPT [0:0]
>> -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
>> -A INPUT -p icmp -j ACCEPT
>> -A INPUT -i lo -j ACCEPT
>> -A INPUT -i eth+ -j ACCEPT
>> -A INPUT -i em2 -j ACCEPT
>> -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT
>> -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT
>> -A FORWARD -p icmp -j ACCEPT
>> -A FORWARD -i lo -j ACCEPT
>> -A FORWARD -i eth+ -j ACCEPT
>> -A FORWARD -i em2 -j ACCEPT
>> -A FORWARD -o eth+ -j ACCEPT
>> -A FORWARD -o em2 -j ACCEPT
>> -A INPUT -j REJECT --reject-with icmp-host-prohibited
>> -A FORWARD -j REJECT --reject-with icmp-host-prohibited
>> COMMIT
>>
>> *ltsp-server-initialize gives me a lot of EM. But the thinclient 
>> boots, so maybe that's not a problem.
>>
>> *when booting the thinclient, I get an EM : unsupported device : 
>> processor centaurhauls
>>   The thinclient is an HP hstnc-004 that I used on 3 different 
>> thinclient systems in the past 3 years.
>>   It would be a real problem if it doesn't work with this image.
>>
>> *when booted, I am able to log in, and adapt language and other 
>> settings in lts.conf. But I can't get rid of the green glare that is 
>> over the
>> screen.
>> Could be the Acer monitor, but it's fine when attached to other devices.
>>
>> Any input on these issues would be greatly appreciated.
>>
>> greetings, J.
>>
>>
>> Op 03-06-13 20:20, Barry Cisna schreef:
>>> Hello All,
>>>
>>> Replying to my previous post.
>>> For completeness.
>>>
>>> The fix for the 'stuck' Booting Linux line was I did not have nfs
>>> service started at boot on the server and had to manually enter
>>> the /opt/ltsp dir in nfs/exports.
>>> After this clients will boot fine.
>>>
>>> Take Care,
>>> Barry
>>>
>>>
>>> _______________________________________________
>>> K12OSN mailing list
>>> [email protected]
>>> https://www.redhat.com/mailman/listinfo/k12osn
>>> For more info see <http://www.k12os.org>
>>
>> _______________________________________________
>> K12OSN mailing list
>> [email protected]
>> https://www.redhat.com/mailman/listinfo/k12osn
>> For more info see <http://www.k12os.org>
>
> _______________________________________________
> K12OSN mailing list
> [email protected]
> https://www.redhat.com/mailman/listinfo/k12osn
> For more info see <http://www.k12os.org>

_______________________________________________
K12OSN mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/k12osn
For more info see <http://www.k12os.org>