Re: Recomendation for LTSP thin clients

Am in Cameroon and i will really appreciate if you advise me on models i
can purchase for a Computer learning center.
Thanks
On Aug 6, 2014 3:38 PM, "Radek Bursztynowski" <[email protected]>
wrote:

> If NetTop will be equipped with internal HDD with OS - yes, NetTop can
> work as stand alone computer.
>
>
>
> Please i wish to know if the nettop can work as a stand alone computer ???
>
> On Aug 6, 2014 10:19 AM, "Radek Bursztynowski" <[email protected]>
> wrote:
> Brian,
>
>
>
> Let me share my experience. Perhaps I don't fit exactly your question, but
> there is my experience:
>
>
>
> Regarding 1.
>
> It depends on what you use thin client. If you execute any application on
> yout thin client locally (like a fat client) thin client performance is
> essential. If not, older machines used as a thin client are fine. I use
> d510 NetTop (with 1 GB of memory)
> http://www.alibaba.com/showroom/nettop-d510.html, and I can say that it
> is optimal machine for K12Linux. I bought theses NetTops with no internal
> HDD. From my poing of view D510 NetTop with K12Linux on CentOS 6.5 x86_64
> servrer is optimal solution. NetTop 510 price was $178 including VAT. I
> prefere NetTops because owing to the NetTop with no HDD I can avoid any
> operating system license payment. Buying thin client machine you pay for OS
> placed in flash memory.
>
>
> Regarding terminal memory my tests showed that d510 machine with activated
> 5 consoles and 5 users logged in and opened Fireox, Libre/Microsoft Office
> (Ctrl+Alt+F1 ... Ctrl+Alt+F5 - 2xLDM, 1xXDMCP 1xxfreerdp and 1xrdesktop)
> used no more than 500 MB of memory. So, for standard office user terminal
> equipped with 1 GB of memory is OK.
>
>
>
>
> Regarding 2.
>
> My experience says that no. K12Linux thin client images don't support all
> video cards with full resolution (CentOS and Fedora). You can try to add to
> the thin client image proper driver/module and to solve this problem (I
> made it for SIS chipset, but I failed with GeForce). Very important is NIC
> too. You shoul check is CentOS/Fedora/LTSP support terminal NIC.
>
>
>
>
> Regarding 3.
>
> I use x86_64 servers (CentOS 6.5) and all my LTSP thin clients runs using
> x86 images and I don't see real reasons to change it (I don't use as a LTSP
> terminals Intel i3/i5/i7/Xeon machines). LTSP server servs thin image to
> the terminal and thin client binaries runs on the terminal. So, if thin
> client image offers the protocols we are at home. Let me add that I tested
> debian 7 LTSP thin client image with K12Linux server and I can say that
> terminal works. I admit that I dont't tested all functionality (for example
> multimedia) with debian 7 thin client image, but in general - it works.
>
>
>
>
> Best regards,
>
> Radek
>
>
>
> ----- Original Message -----
>
> From: "Brian Fristensky" <[email protected]>
>
> Sent: Wed, 8/6/2014 1:08am
>
> To: "Support list for open source software in schools." <[email protected]
> >
>
> Subject: [K12OSN] Recomendation for LTSP thin clients
>
>
>
> I need to replace my Diskless Workstations T1420 thin client because the
> Eden
>
> processor is no longer supported ie. will not boot with RHEL 6.5.
>
>
>
> 1. I am considering going with a Diskless Workstations 1600 or 1700, which
> uses
>
> an N270 Atom processor, which I would assume is still supported, if they're
>
> advertising it. I am a little hesitant to go with this processor, since it
> was
>
> released in 2008. It seems likely that support for such an old processor
> will be
>
> dropped in the near future.
>
>
>
> Are there other thin client options to consider? This is a single seat thin
>
> client at home, so price is not really an object. What I am more
> interested in
>
> is ease of management and performance.
>
>
>
> 2. Should I assume that any thin client hardware that supports PXE boot
> will
>
> work with LTSP (obsolescence aside?)
>
>
>
> 3. My server is a 64-bit machine running RHEL6.5 (Essentially Centos6.5).
> Would
>
> I be correct in assuming that it would be better to have a 64-bit thin
> client?
>
> As far as I can tell from the Diskless Workstations web sites, their Atom
>
> processors are 32-bit. I would expect that if I did want to run some
>
> applications as local applications, having a 64-bit TC would be simpler. As
>
> well, 32-bit processors are, let's face it, so 1990's. I would expect a
> 64-bit
>
> processor to be less subject to the fate of obsolescence that my current TC
>
> succumbed to.
>
>
>
> Suggestions for thin clients that are known to work with LTSP, and use
> recent
>
> processors, would be greatly appreciated.
>
>
>
>
>
> Brian
>
>
>
> _______________________________________________
>
> K12OSN mailing list
>
> [email protected]
>
> https://www.redhat.com/mailman/listinfo/k12osn
>
> For more info see <http://www.k12os.org>;
>
>
>
> _______________________________________________
>
> K12OSN mailing list
>
> [email protected]
>
> https://www.redhat.com/mailman/listinfo/k12osn
>
> For more info see <http://www.k12os.org>
>
>
> _______________________________________________
> K12OSN mailing list
> [email protected]
> https://www.redhat.com/mailman/listinfo/k12osn
> For more info see <http://www.k12os.org>;
>
> _______________________________________________
> K12OSN mailing list
> [email protected]
> https://www.redhat.com/mailman/listinfo/k12osn
> For more info see <http://www.k12os.org>
>

_______________________________________________
K12OSN mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/k12osn
For more info see <http://www.k12os.org>