Re:Aligning partitions

On 11/30/11 02:30 AM, I wrote from a different account:
> Re: Alligning partitions
>
>
>> Hi
>> I am building Red Hat 5.4 and 5.5 boxes on VMWare and some on HP 
>> blades with SAN attached storage. I need to do 
>> partition alignment during build which I understand is done 
>> automatically in Red Hat 6's version of anaconda and later but not 
>> yet in 5.4, 5.5. So a number of questions:
>> * I could not find an option for part in the 
>> docs  (http://fedoraproject.org/wiki/Anaconda/Kickstart#part_or_partition) 
>> that easily allow me to set a sector offset. I have found a number of 
>> ways to do this but was wondering if there is an hidden option to do 
>> this using part. Currently I am using fdisk to create a partition 
>> starting at sector 64 rather than 63 for SAN storage and doing the 
>> same for VMWare boxes.
>
> I *thought* (check with VMware) that after Vsphere 3 you wouldn't need 
> to align the partitions any more--but the last time I checked was in 
> 2009, so I could be seriously wrong. Or you could be running V3, in 
> which case...
I was wrong about this, at least in 4.0.

>> * How can I easily debug my kickstart? I currently change the 
>> kickstart and then reboot the physical server but that is 
>> very painful as it has to go through all of the bios checks etc and 
>> then sometime I forget to press F12... I tried adding a sleep 100000 
>> to my pre scripts which works and allows me to run some commands on 
>> the command line but I am not sure how to "reparse" the kickstart 
>> file to test whether new settings works.
>
> I usually use VMware Workstation/Player to debug my kickstart scripts, 
> with lots of redirecting to different log files. This lets me sit in 
> my somewhat comfy chair in a slightly quieter machine room (my desk is 
> on a raised floor, but most of the servers are in the other room) and 
> watch the installs while I do other things. Then when I've got it 
> mostly right I run it on the real hardware, which would (eventually) 
> be a known transform.

One of my co-workers pointed me to an rpm called "pykickstart" that 
contains ksvalidator.

It seems to work as it gave me the same errors on my ks.cfg as anaconda 
did.

I still don't understand why --resolution and --depth don't take any 
options in 6.1, when they don't make sense without options.


Regards,
Petro.
:wq

_______________________________________________
Kickstart-list mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/kickstart-list