Re: Pulse not starting on RH7.3

mixo <[email protected]>
Newsgroups gmane.linux.redhat.piranha
Message-ID <[email protected]> 
No. Your piranha configuration (/etc/sysconfig/ha/lvs.cf) was likey to 
be the cause.
In your 'virtual' sever settings, 'active' was probably set to 0 (or 
nothing).

Posts wrote:

> Fixed, fresh OS install fixed it. Too many hacks with old instructions 
> was the likely cause.
>  
> Cheers,
> Kawika
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.