Re: Pulse Reload configuration problem

Just wondering, if you are only servicing web servers, why would
restarting it be an issue?  I have restarted pulse with other protocols,
and it is quick enough to resume the session, i.e. the keepalive on ssh,
telnet, and other IP connections.  Once in a while (usually from a
misconfiguration), you might lose client connection because of the
timing.


On Wed, 2007-11-14 at 14:32 +0000, Michael Geraghty wrote:
> Hi
> 
>  
> 
> I am running “ipvsadm-1.24-6” on Redhat 4/4 ES.  I have the system
> configured using piranha and works very well apart from one thing .. 
> 
>  
> 
> The problem I am having is when I change the configuration when adding
> a new site/VIP – I have to restart all nanny procs. The command
> ‘service pulse restart’ will not work for me.  I get the following in
> my messages file:
> 
>  
> 
> rereading configuration file
> 
> pulse: pulse -HUP succeeded
> 
>  
> 
> But the new nanny processes do not start up.  I also tried “kill -1
> pid” – but no joy.  The only thing that will work is a “service pulse
> restart” – which is not good as there are several web servers live.
> 
>  
> 
> Any ideas or suggestions would be great
> 
>  
> 
> Thanks
> 
>  
> 
> Mick
> 
>  
> 
>  
> 
> 
> 
> 
> ***********************************************************************************************
> This email, its contents and any files attached are a confidential
> communication and are
> intended only for the named addressees indicated in the message. 
> 
> If you are not the named addressee or if you have received this email
> in error, you may not, 
> without the consent of Cognotec, copy, use or rely on any information
> or attachments in any way. 
> Please notify the sender by return email and delete it from your email
> system. 
> 
> Unless separately agreed, Cognotec does not accept any responsibility
> for the accuracy or
> completeness of the contents of this email or its attachments. Please
> note that any views,
> opinion or advice contained in this communication are those of the
> sending individual
> and not those of Cognotec and Cognotec shall have no liability
> whatsoever in relation to
> this communication (or its content) unless separately agreed.
> ***********************************************************************************************
> 
> 
> _______________________________________________
> Piranha-list mailing list
> [email protected]
> https://www.redhat.com/mailman/listinfo/piranha-list

_______________________________________________
Piranha-list mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/piranha-list