Re: Pulse Interfaces

Thank you for the quick reply.  I have not implemented a failover
solution for LVS, but that is going to change in the near future.  

The issue also occurs when rebooting the LVS server and Pulse comes up
for the first time.  It is not bringing up all interfaces.  I have to
manually set the interfaces using ifconfig.  Something else I just found
that might be intresting is that when pulse starts
successfully, /var/log/messages shows all interfaces are being brought
up in the ipvsadm routing table, but some of the interfaces don't show
up in the ifconfig output. 

On Tue, 2008-03-18 at 12:00 -0400, [email protected]
wrote:
> Send Piranha-list mailing list submissions to
> 	[email protected]
> 
> To subscribe or unsubscribe via the World Wide Web, visit
> 	https://www.redhat.com/mailman/listinfo/piranha-list
> or, via email, send a message with subject or body 'help' to
> 	[email protected]
> 
> You can reach the person managing the list at
> 	[email protected]
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Piranha-list digest..."
> Today's Topics:
> 
>    1. Pulse Interfaces (Seth Paxton)
>    2. Re: Pulse Interfaces ([email protected])
> email message attachment
> > -------- Forwarded Message --------
> > From: Seth Paxton <[email protected]>
> > Reply-To: Piranha clustering/HA technology <[email protected]>
> > To: [email protected]
> > Subject: Pulse Interfaces
> > Date: Mon, 17 Mar 2008 15:41:57 -0700
> > 
> > When restarting pulse, I have noticed that pulse does not bring up all
> > virtual interfaces, causing some services to not work properly.  In
> > order to fix the issue, I have to use the ifconfig command to bring up
> > the virtual interfaces manually.  this is a serious issue because high
> > availablity is our priority.  Has anybody else had a similar issue?  If
> > so, what has been done to resolve it?  any help would be greatly
> > appreciated.  
> > 
> > ~Seth
> > 
> > 
> email message attachment
> > -------- Forwarded Message --------
> > From: [email protected]
> > Reply-To: [email protected], Piranha clustering/HA technology
> > <[email protected]>
> > To: Piranha clustering/HA technology <[email protected]>
> > Subject: Re: Pulse Interfaces
> > Date: Mon, 17 Mar 2008 23:51:39 +0000
> > 
> > Are you doing heartbeat and is there a failover possibly holding onto some vips.  Have you also tried service pulse stop/start.  Also service network stop/start to see results
> > 
> > Sent from my Verizon Wireless BlackBerry
> > 
> > -----Original Message-----
> > From: Seth Paxton <[email protected]>
> > 
> > Date: Mon, 17 Mar 2008 15:41:57 
> > To:[email protected]
> > Subject: Pulse Interfaces
> > 
> > 
> > When restarting pulse, I have noticed that pulse does not bring up all
> > virtual interfaces, causing some services to not work properly.  In
> > order to fix the issue, I have to use the ifconfig command to bring up
> > the virtual interfaces manually.  this is a serious issue because high
> > availablity is our priority.  Has anybody else had a similar issue?  If
> > so, what has been done to resolve it?  any help would be greatly
> > appreciated.  
> > 
> > ~Seth
> > 
> > _______________________________________________
> > Piranha-list mailing list
> > [email protected]
> > https://www.redhat.com/mailman/listinfo/piranha-list
> > 
> > 
> _______________________________________________
> Piranha-list mailing list
> [email protected]
> https://www.redhat.com/mailman/listinfo/piranha-list