Re: Pulse Interfaces
"Herta Van den Eynde" <[email protected]> Wed, 19 Mar 2008 15:35:00 +0100
| Newsgroups | gmane.linux.redhat.piranha |
|---|---|
| Message-ID | <[email protected]> |
--===============0929088331== Content-Type: multipart/alternative; boundary="----=_Part_12631_6887047.1205937300738" ------=_Part_12631_6887047.1205937300738 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline On 18/03/2008, pb <[email protected]> wrote: > > Seth, FYI I am not with RH I am just nother Piranha > user. > > You may want to check two more things > > (1) verify your lvs.cf file is setup correctly - if > not you could see some of your interfaced not coming > up, and that the IP's you are setting up are not > duplicates. Maybe someone at RH can review your > lvs.cf. > > (2) make sure none of your PULSE / LVS / NANNY > processes are going Zombie. (ps ufax) > > > > > > --- Seth Paxton <[email protected]> wrote: > > > Thank you for the quick reply. I have not > > implemented a failover > > solution for LVS, but that is going to change in the > > near future. > > > > The issue also occurs when rebooting the LVS server > > and Pulse comes up > > for the first time. It is not bringing up all > > interfaces. I have to > > manually set the interfaces using ifconfig. > > Something else I just found > > that might be intresting is that when pulse starts > > successfully, /var/log/messages shows all interfaces > > are being brought > > up in the ipvsadm routing table, but some of the > > interfaces don't show > > up in the ifconfig output. > > > > On Tue, 2008-03-18 at 12:00 -0400, > > [email protected] > > wrote: > > > Send Piranha-list mailing list submissions to > > > [email protected] > > > > > > To subscribe or unsubscribe via the World Wide > > Web, visit > > > > > https://www.redhat.com/mailman/listinfo/piranha-list > > > or, via email, send a message with subject or body > > 'help' to > > > [email protected] > > > > > > You can reach the person managing the list at > > > [email protected] > > > > > > When replying, please edit your Subject line so it > > is more specific > > > than "Re: Contents of Piranha-list digest..." > > > Today's Topics: > > > > > > 1. Pulse Interfaces (Seth Paxton) > > > 2. Re: Pulse Interfaces ([email protected]) > > > email message attachment > > > > -------- Forwarded Message -------- > > > > From: Seth Paxton > > <[email protected]> > > > > Reply-To: Piranha clustering/HA technology > > <[email protected]> > > > > To: [email protected] > > > > Subject: Pulse Interfaces > > > > Date: Mon, 17 Mar 2008 15:41:57 -0700 > > > > > > > > When restarting pulse, I have noticed that pulse > > does not bring up all > > > > virtual interfaces, causing some services to not > > work properly. In > > > > order to fix the issue, I have to use the > > ifconfig command to bring up > > > > the virtual interfaces manually. this is a > > serious issue because high > > > > availablity is our priority. Has anybody else > > had a similar issue? If > > > > so, what has been done to resolve it? any help > > would be greatly > > > > appreciated. > > > > > > > > ~Seth > > > > > > > > > > > email message attachment > > > > -------- Forwarded Message -------- > > > > From: [email protected] > > > > Reply-To: [email protected], Piranha > > clustering/HA technology > > > > <[email protected]> > > > > To: Piranha clustering/HA technology > > <[email protected]> > > > > Subject: Re: Pulse Interfaces > > > > Date: Mon, 17 Mar 2008 23:51:39 +0000 > > > > > > > > Are you doing heartbeat and is there a failover > > possibly holding onto some vips. Have you also > > tried service pulse stop/start. Also service > > network stop/start to see results > > > > > > > > Sent from my Verizon Wireless BlackBerry > > > > > > > > -----Original Message----- > > > > From: Seth Paxton > > <[email protected]> > > > > > > > > Date: Mon, 17 Mar 2008 15:41:57 > > > > To:[email protected] > > > > Subject: Pulse Interfaces > > > > > > > > > > > > When restarting pulse, I have noticed that pulse > > does not bring up all > > > > virtual interfaces, causing some services to not > > work properly. In > > > > order to fix the issue, I have to use the > > ifconfig command to bring up > > > > the virtual interfaces manually. this is a > > serious issue because high > > > > availablity is our priority. Has anybody else > > had a similar issue? If > > > > so, what has been done to resolve it? any help > > would be greatly > > > > appreciated. > > > > > > > > ~Seth > > > > > Also verify that lvs.cf is the same on both nodes. Kind regards, Herta -- "Life on Earth may be expensive, but it comes with a free ride around the Sun." ------=_Part_12631_6887047.1205937300738 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline On 18/03/2008, <b class="gmail_sendername">pb</b> <<a href="mailto:[email protected]">[email protected]</a>> wrote:<div><span class="gmail_quote"></span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;"> Seth, FYI I am not with RH I am just nother Piranha<br> user.<br> <br> You may want to check two more things<br> <br> (1) verify your <a href="http://lvs.cf">lvs.cf</a> file is setup correctly - if<br> not you could see some of your interfaced not coming<br> up, and that the IP's you are setting up are not<br> duplicates. Maybe someone at RH can review your<br> <a href="http://lvs.cf">lvs.cf</a>.<br> <br> (2) make sure none of your PULSE / LVS / NANNY<br> processes are going Zombie. (ps ufax)<br> <br><br> <br> <br> <br> --- Seth Paxton <<a href="mailto:[email protected]">[email protected]</a>> wrote:<br> <br> > Thank you for the quick reply. I have not<br> > implemented a failover<br> > solution for LVS, but that is going to change in the<br> > near future.<br> ><br> > The issue also occurs when rebooting the LVS server<br> > and Pulse comes up<br> > for the first time. It is not bringing up all<br> > interfaces. I have to<br> > manually set the interfaces using ifconfig.<br> > Something else I just found<br> > that might be intresting is that when pulse starts<br> > successfully, /var/log/messages shows all interfaces<br> > are being brought<br> > up in the ipvsadm routing table, but some of the<br> > interfaces don't show<br> > up in the ifconfig output.<br> ><br> > On Tue, 2008-03-18 at 12:00 -0400,<br> > <a href="mailto:[email protected]">[email protected]</a><br> > wrote:<br> > > Send Piranha-list mailing list submissions to<br> > > <a href="mailto:[email protected]">[email protected]</a><br> > ><br> > > To subscribe or unsubscribe via the World Wide<br> > Web, visit<br> > ><br> > <a href="https://www.redhat.com/mailman/listinfo/piranha-list">https://www.redhat.com/mailman/listinfo/piranha-list</a><br> > > or, via email, send a message with subject or body<br> > 'help' to<br> > > <a href="mailto:[email protected]">[email protected]</a><br> > ><br> > > You can reach the person managing the list at<br> > > <a href="mailto:[email protected]">[email protected]</a><br> > ><br> > > When replying, please edit your Subject line so it<br> > is more specific<br> > > than "Re: Contents of Piranha-list digest..."<br> > > Today's Topics:<br> > ><br> > > 1. Pulse Interfaces (Seth Paxton)<br> > > 2. Re: Pulse Interfaces (<a href="mailto:[email protected]">[email protected]</a>)<br> > > email message attachment<br> > > > -------- Forwarded Message --------<br> > > > From: Seth Paxton<br> > <<a href="mailto:[email protected]">[email protected]</a>><br> > > > Reply-To: Piranha clustering/HA technology<br> > <<a href="mailto:[email protected]">[email protected]</a>><br> > > > To: <a href="mailto:[email protected]">[email protected]</a><br> > > > Subject: Pulse Interfaces<br> > > > Date: Mon, 17 Mar 2008 15:41:57 -0700<br> > > ><br> > > > When restarting pulse, I have noticed that pulse<br> > does not bring up all<br> > > > virtual interfaces, causing some services to not<br> > work properly. In<br> > > > order to fix the issue, I have to use the<br> > ifconfig command to bring up<br> > > > the virtual interfaces manually. this is a<br> > serious issue because high<br> > > > availablity is our priority. Has anybody else<br> > had a similar issue? If<br> > > > so, what has been done to resolve it? any help<br> > would be greatly<br> > > > appreciated.<br> > > ><br> > > > ~Seth<br> > > ><br> > > ><br> > > email message attachment<br> > > > -------- Forwarded Message --------<br> > > > From: <a href="mailto:[email protected]">[email protected]</a><br> > > > Reply-To: <a href="mailto:[email protected]">[email protected]</a>, Piranha<br> > clustering/HA technology<br> > > > <<a href="mailto:[email protected]">[email protected]</a>><br> > > > To: Piranha clustering/HA technology<br> > <<a href="mailto:[email protected]">[email protected]</a>><br> > > > Subject: Re: Pulse Interfaces<br> > > > Date: Mon, 17 Mar 2008 23:51:39 +0000<br> > > ><br> > > > Are you doing heartbeat and is there a failover<br> > possibly holding onto some vips. Have you also<br> > tried service pulse stop/start. Also service<br> > network stop/start to see results<br> > > ><br> > > > Sent from my Verizon Wireless BlackBerry<br> > > ><br> > > > -----Original Message-----<br> > > > From: Seth Paxton<br> > <<a href="mailto:[email protected]">[email protected]</a>><br> > > ><br> > > > Date: Mon, 17 Mar 2008 15:41:57<br> > > > <a href="mailto:To:[email protected]">To:[email protected]</a><br> > > > Subject: Pulse Interfaces<br> > > ><br> > > ><br> > > > When restarting pulse, I have noticed that pulse<br> > does not bring up all<br> > > > virtual interfaces, causing some services to not<br> > work properly. In<br> > > > order to fix the issue, I have to use the<br> > ifconfig command to bring up<br> > > > the virtual interfaces manually. this is a<br> > serious issue because high<br> > > > availablity is our priority. Has anybody else<br> > had a similar issue? If<br> > > > so, what has been done to resolve it? any help<br> > would be greatly<br> > > > appreciated.<br> > > ><br> > > > ~Seth<br> > > ><br></blockquote></div><br>Also verify that <a href="http://lvs.cf">lvs.cf</a> is the same on both nodes.<br><br>Kind regards,<br><br>Herta<br clear="all"><br>-- <br> "Life on Earth may be expensive, <br> but it comes with a free ride around the Sun." ------=_Part_12631_6887047.1205937300738-- --===============0929088331== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Piranha-list mailing list [email protected] https://www.redhat.com/mailman/listinfo/piranha-list --===============0929088331==--