Re: Re:Internet connection through win2000 pro

Sounds as though you haven't got the drivers for your network cards
loaded.

Ian

------------
Dr Ian Firla
Robert Graves Trust		| "A partial count of the software available
St John's College, Oxford       | in just one noncommerical Linux system
OX1 3JP - +44-(0)7855-310565	| would have cost about $1.9 billion to develop
http://www.robertgraves.org	| ... the way Microsoft does it" Bruce Perens


On Wed, 15 Jan 2003, E&Erdem wrote:

> I did it, but when i type the
> /etc/init.d/network restart
> it have been giving this;
> Network paremeters preparing [OK]
> lo interface ... [OK]
>
> eth0 interface ... [ERROR]
> eth1 interface ... [ERROR]
>
> So, anybody changed with ifconfig that i run after this.
>
>
> ----- Original Message -----
> From: "Ian Firla" <[email protected]>
> To: <[email protected]>
> Sent: Wednesday, January 15, 2003 1:53 PM
> Subject: Re: Re:Internet connection through win2000 pro
>
>
> >
> > OK, now, as root, in the shell, run
> >
> > netconfig
> >
> > and enter the relevant details for your network putting the ip address of
> > your windows box as the gateway,
> > 255.255.255.0 as the gateway
> > and either your windows box's IP address as your nameserver or a public
> > domain server that your know.
> >
> > then, still as root, type
> >
> > /etc/init.d/network restart
> >
> > then type ifconfig again and let me know if the output has changed.
> >
> > Ian
> >
> > ------------
> > Dr Ian Firla
> > Robert Graves Trust | "A partial count of the software available
> > St John's College, Oxford       | in just one noncommerical Linux system
> > OX1 3JP - +44-(0)7855-310565 | would have cost about $1.9 billion to
> develop
> > http://www.robertgraves.org | ... the way Microsoft does it" Bruce Perens
> >
> >
> > On Wed, 15 Jan 2003, E&Erdem wrote:
> >
> > > I run ifconfig on root, and it gives this screen
> > >
> > > Link encap: Local loopback
> > > inet addr: 127.0.0.1 mask: 255.0.0.0
> > > UP LOOPBACK RUNNING MTU: 16436 metric: 1
> > > RX packets: 6 errors: 0 dropped: 0 overruns: 0 frame: 0
> > > TX packets: 6 errors: 0 dropped: 0 overruns: 0 carrier: 0
> > > collissions: 0 txqueulen: 0
> > >
> > > Ian, thank you very much, but if you are boring please tell me...
> > >
> > >
> > >
> > > ----- Original Message -----
> > > From: "Ian Firla" <[email protected]>
> > > To: <[email protected]>
> > > Sent: Wednesday, January 15, 2003 12:54 PM
> > > Subject: Re: Re:Internet connection through win2000 pro
> > >
> > >
> > > >
> > > > Right, so you open up a shell, then su to root, right?
> > > >
> > > > as root, type:
> > > >
> > > > ifconfig
> > > >
> > > > what does it tell you?
> > > >
> > > > (to "su to root", type
> > > >
> > > > su
> > > >
> > > > then enter your root password)
> > > >
> > > > Ian
> > > >
> > > > ------------
> > > > Dr Ian Firla
> > > > Robert Graves Trust | "A partial count of the software available
> > > > St John's College, Oxford       | in just one noncommerical Linux
> system
> > > > OX1 3JP - +44-(0)7855-310565 | would have cost about $1.9 billion to
> > > develop
> > > > http://www.robertgraves.org | ... the way Microsoft does it" Bruce
> Perens
> > > >
> > > >
> > > > On Wed, 15 Jan 2003, E&Erdem wrote:
> > > >
> > > > > Ok,
> > > > > Firstly the "netconfig" doesn't running on the kde, unless i choose
> "run
> > > on
> > > > > the terminal". And i tried on the terminal what you said. There is
> no
> > > error
> > > > > during i say network restart. When i say this it gives an error:
> > > > > eth0 not running error, eth1 not running error, or something like
> this.
> > > > > And why the commands don't running on the kde?
> > > > >
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Ian Firla" <[email protected]>
> > > > > To: <[email protected]>
> > > > > Sent: Tuesday, January 14, 2003 11:20 AM
> > > > > Subject: Re: Re:Internet connection through win2000 pro
> > > > >
> > > > >
> > > > > >
> > > > > > What is that you did?
> > > > > >
> > > > > > If you can give us a step-by-step description and the outcomes of
> each
> > > > > > step, perhaps we can help you?
> > > > > >
> > > > > > What you're trying to do is relatively simple so unless there's
> > > something
> > > > > > on the windows side blocking you (which we can also figure out),
> > > there's
> > > > > > no reason why you can't get this to work.
> > > > > >
> > > > > > Ian
> > > > > >
> > > > > > ------------
> > > > > > Dr Ian Firla
> > > > > > Robert Graves Trust | "A partial count of the software available
> > > > > > St John's College, Oxford       | in just one noncommerical Linux
> > > system
> > > > > > OX1 3JP - +44-(0)7855-310565 | would have cost about $1.9 billion
> to
> > > > > develop
> > > > > > http://www.robertgraves.org | ... the way Microsoft does it" Bruce
> > > Perens
> > > > > >
> > > > > >
> > > > > > On Tue, 14 Jan 2003, E&Erdem wrote:
> > > > > >
> > > > > > > I didn't carry out succesfully. :((
> > > > > > > I think I wanted a bit more than i can do. I don't know anything
> > > about
> > > > > > > TCP/IP and Linux. But i have been attempting learn either. So i
> > > decided
> > > > > to
> > > > > > > learn something about TCP/IP before i do that. Well, i started
> > > introduce
> > > > > to
> > > > > > > linux. I think this what i have wanted to do could last a bit
> long.
> > > > > Isn't
> > > > > > > it?
> > > > > > >
> > > > > > > Thanks Ian and Jim
> > > > > > >
> > > > > > >
> > > > > > > ----- Original Message -----
> > > > > > > From: "James P. Roberts" <[email protected]>
> > > > > > > To: <[email protected]>
> > > > > > > Sent: Monday, January 13, 2003 1:22 AM
> > > > > > > Subject: Re:Internet connection through win2000 pro
> > > > > > >
> > > > > > >
> > > > > > > > > Thank you very much Jim,
> > > > > > > > > I wanna use linux for my internet connection too. But I have
> not
> > > > > been
> > > > > > > > know
> > > > > > > > > linux enough yet. (And the machine i installed redhat 7.1
> isn't
> > > > > fixed
> > > > > > > > in my
> > > > > > > > > office.) So until i learn linux enough i must use win2000
> for
> > > > > internet
> > > > > > > > > connection.
> > > > > > > > > Well, i'm looking for how-to documents on internet. I want
> you
> > > know
> > > > > > > > that i'm
> > > > > > > > > a new member of linux RedHat family. And i wanna learn linux
> > > fast as
> > > > > > > > > possible as.
> > > > > > > > > If you can explanation of my question, (how can i connect to
> > > > > internet
> > > > > > > > > through win200 pro.) please tell me. I have a ethernet card,
> and
> > > i'm
> > > > > > > > using a
> > > > > > > > > hub for together link my machines.
> > > > > > > > >
> > > > > > > > > Thanks again.
> > > > > > > >
> > > > > > > > I have very little experience with win2000, so I can't help
> there,
> > > > > > > > sorry.  As for the hub:  Connect your win2000 box's ethernet
> card
> > > to
> > > > > the
> > > > > > > > hub with an ethernet patch cable (NOT a crossover cable).  Ask
> > > your
> > > > > > > > local electronics store for assistance in picking out the
> right
> > > > > cables,
> > > > > > > > if you don't already have them.  Also connect the ethernet
> card in
> > > you
> > > > > > > > Linux box to another port in the same hub.  You will probably
> also
> > > > > need
> > > > > > > > to plug the hub's power supply into a wall outlet, and the
> power
> > > > > supply
> > > > > > > > connector to the hub.  Follow the instructions that come with
> the
> > > hub.
> > > > > > > >
> > > > > > > > Now, you will need a spare ethernet card in the win2000 box!
> One
> > > > > > > > ethernet connection is probably being used by the internet
> > > connection
> > > > > > > > (via cable modem, DSL modem, or whatever...)  That's a good
> > > question
> > > > > to
> > > > > > > > know the answer to...  How exactly is the win2000 box
> connected to
> > > the
> > > > > > > > internet?
> > > > > > > >
> > > > > > > > Regards,
> > > > > > > > Jim
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > _______________________________________________
> > > > > > > > Seawolf-list mailing list
> > > > > > > > [email protected]
> > > > > > > > https://listman.redhat.com/mailman/listinfo/seawolf-list
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > _______________________________________________
> > > > > > > Seawolf-list mailing list
> > > > > > > [email protected]
> > > > > > > https://listman.redhat.com/mailman/listinfo/seawolf-list
> > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > _______________________________________________
> > > > > > Seawolf-list mailing list
> > > > > > [email protected]
> > > > > > https://listman.redhat.com/mailman/listinfo/seawolf-list
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > Seawolf-list mailing list
> > > > > [email protected]
> > > > > https://listman.redhat.com/mailman/listinfo/seawolf-list
> > > > >
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > Seawolf-list mailing list
> > > > [email protected]
> > > > https://listman.redhat.com/mailman/listinfo/seawolf-list
> > > >
> > >
> > >
> > >
> > > _______________________________________________
> > > Seawolf-list mailing list
> > > [email protected]
> > > https://listman.redhat.com/mailman/listinfo/seawolf-list
> > >
> >
> >
> >
> > _______________________________________________
> > Seawolf-list mailing list
> > [email protected]
> > https://listman.redhat.com/mailman/listinfo/seawolf-list
> >
>
>
>
> _______________________________________________
> Seawolf-list mailing list
> [email protected]
> https://listman.redhat.com/mailman/listinfo/seawolf-list
>