Re: Re:Internet connection through win2000 pro

"Steven J. Yellin" <[email protected]>
Newsgroups gmane.linux.redhat.release.seawolf
Message-ID <Pine.LNX.4.44.0301161344390.27118-100000@ucsba1.slac.stanford.edu>
    I don't know who "it" was that gave "bash:  /etc/modules.conf:
permission denied".  Did it happen with "/etc/rc.d/init.d/network restart"
(not "/etc/init.d/network restart")?  Were you root when you tried to
restart the network? Is /etc/modules.conf owned by root?  Are the
protections of /etc/modules.conf "-rw-r--r--" as in what I get when I type
ls -l /etc/modules.conf

-rw-r--r--    1 root     root          278 Jan  4 01:27 /etc/modules.conf

And while your at it, you might check that "locate tulip" shows you have
a tulip.o file in /lib/modules/<your kernel number>/..., since none of
this will work if your machine doesn't have the driver.

On Thu, 16 Jan 2003, E&Erdem wrote:

> Unfortunately negatif,
> I have tried what you said Steven. It gave this:
> bash:/etc/modules.conf: permission denied
> 
> :(((
> 
> 
> 
> ----- Original Message -----
> From: "Steven J. Yellin" <[email protected]>
> To: <[email protected]>
> Sent: Wednesday, January 15, 2003 10:10 PM
> Subject: Re: Re:Internet connection through win2000 pro
> 
> 
> > On Wed, 15 Jan 2003, Ian Firla wrote:
> >
> > >
> > > OK, now, as root, in the shell, run
> > >
> > > netconfig
> > >
> > > and enter the relevant details for your network putting the ip address
> of
> > > your windows box as the gateway,
> > > 255.255.255.0 as the gateway
> > > and either your windows box's IP address as your nameserver or a public
> > > domain server that your know.
> > >
> > > then, still as root, type
> > >
> > > /etc/init.d/network restart
> > >
> > > then type ifconfig again and let me know if the output has changed.
> > >
> >     Maybe Ian meant "255.255.255.0 as the broadcast" instead of "gateway".
> > Anyway, it doesn't look like you're getting far enough for that to matter
> > yet.  The problem may be that your computer doesn't yet know what driver
> > to use with your ethernet cards.  If you have Surecom EP-320X cards, I
> > think/hope the tulip driver will work.  So try putting in
> > /etc/modules.conf the lines
> >
> > alias eth0 tulip
> > alias eth1 tulip
> >
> > and try again with "/etc/init.d/network restart" and "ifconfig".
> >
> > --
> > Steven Yellin
> >
> >
> >
> > _______________________________________________
> > Seawolf-list mailing list
> > [email protected]
> > https://listman.redhat.com/mailman/listinfo/seawolf-list
> >
> 
> 
> 
> _______________________________________________
> Seawolf-list mailing list
> [email protected]
> https://listman.redhat.com/mailman/listinfo/seawolf-list
> 

-- 
Steven Yellin
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.