Re: Multiple DSL Connections not working

Hi,

Am 10.01.2011 um 19:03 schrieb Andre Schubert:

> Hi,
>
> i have a little problem and some help from somebody with more  
> knowledge.
> I have two DSL-Lines, a VLAN-capable Switch and a RHEL3 Box.
> The RHEL3-Box ist connected via a VLAN-Trunk to the switch.
> There is a seperate VLAN for each DSL Line, untagged where the DSL- 
> Modem
> is connected to the Switch and tagged where the RHEL3-Box is  
> connected.
>
> On the RHEL3-Box i have VLAN interfaces for each DSL-Line eth0.101,  
> eth0.102.
> In ifcfg-ppp0 i use ETH=eth0.101, in ifcfg-ppp1 i use ETH=eth0.102.
>
> My problem is, the only one line is working at the same time,
> but both at the same time does not work.
>
> Is there a problem iam not seeing here,
> maybe a hidden limitation?
>
> Hope someone could shed some light on this issue.
>

For those who are interested, i solved the problem.
After changing the Mac-Address of one VLAN-Interfaces
the two DSL-Lines are working at the same time.
Seems that the two DSL-Lines were ending on the
same Access-Concentrator and therefor causing some
problems because of the same Mac-Adress.

Best Regards,
Andre

--
Taroon-list mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/taroon-list