Re: MythTV 0.27.4-31 Upgrade Success
Kirk Bocek <[email protected]> Fri, 05 Jun 2015 08:33:11 -0700
| Newsgroups | gmane.linux.redhat.rpm.atrpms.general |
|---|---|
| Message-ID | <[email protected]> |
--===============4459394103135010568==
Content-Type: text/html; charset=windows-1252
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta content="text/html; charset=windows-1252"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<br>
<br>
<div class="moz-cite-prefix">On 6/4/2015 9:10 AM, Kirk Bocek wrote:<br>
</div>
<blockquote cite="mid:[email protected]" type="cite">
<br>
Argh... still no output from ir-keytable.
<br>
<br>
$ir-keytable
<br>
Found /sys/class/rc/rc4/ (/dev/input/event14) with:
<br>
Driver mceusb, table rc-rc6-mce
<br>
Supported protocols: NEC RC-5 RC-6 JVC SONY LIRC
<br>
Enabled protocols: RC-6
<br>
Name: Media Center Ed. eHome Infrared
<br>
bus: 3, vendor/product: 0471:0815, version: 0x0000
<br>
Repeat delay = 500 ms, repeat period = 33 ms
<br>
<br>
$ir-keytable -t -d /dev/input/event14
<br>
Testing events. Please, press CTRL-C to abort.
<br>
^C
<br>
<br>
ir-keytable -r -d /dev/input/event14
<br>
Enabled protocols: NEC RC-5 RC-6 JVC SONY SANYO LIRC RC-5-SZ SHARP
MCE_KBD XMP
<br>
<br>
I have the devinput config file in /etc/lirc/lircd.conf.
<br>
<br>
</blockquote>
<br>
After all that hassle I think this just boils down to a problem with
the remote configuration file I was using. I used irrecord to start
a partial config file and viola! irw produces output:
<br>
<br>
0000000000000001 00 BTN_SELECT recorded.conf
<br>
0000000000000001 00 BTN_SELECT recorded.conf
<br>
0000000000000002 00 BTN_RIGHT recorded.conf
<br>
0000000000000002 00 BTN_RIGHT recorded.conf
<br>
0000000000000002 00 BTN_RIGHT recorded.conf
<br>
0000000000000003 00 BTN_LEFT recorded.conf
<br>
<br>
Note that I did this after *undoing* the devinput configuration:<br>
<br>
LIRC_DRIVER=""<br>
LIRC_DEVICE=""<br>
<br>
Now the configuration I have been using for <b class="moz-txt-star"><span
class="moz-txt-tag">*</span>years<span class="moz-txt-tag">*</span></b>
is a Scientific Atlanta 3250. Now there <b class="moz-txt-star"><span
class="moz-txt-tag">*</span>is<span class="moz-txt-tag">*</span></b>
a configuration in the database for this remote but it doesn't
appear to work with LIRC 0.9.0. Seems like everything in the
database has been generated well before 0.8.6.
<br>
<br>
<a class="moz-txt-link-freetext" href="http://lirc.sourceforge.net/remotes/scientific_atlanta/3250">http://lirc.sourceforge.net/remotes/scientific_atlanta/3250</a><br>
<br>
So the /dev/lirc0 interface is working. What was not working was my
remote configuration from 0.8.7.<br>
<br>
This is a remote that I could use with a cheap programmable remote
*and* that had the A, B, C, D buttons I've come to depend on. I
copied the base config and it caused errors on loading requiring the
removal of the TV/VCR section.<br>
<br>
So I either need to pick a new remote that is both programmable on
my physical remote and has A, B, C, D buttons or I need to irrecord
a new setup off of the generic RC-5 configuration.<br>
<br>
</body>
</html>
--===============4459394103135010568==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
atrpms-users mailing list
[email protected]
http://lists.atrpms.net/mailman/listinfo/atrpms-users
--===============4459394103135010568==--