Please Help - OPTi 82c933 Sound Card not working in 8.0, use to work on earlier versions
Sajal <[email protected]>
| Newsgroups | gmane.linux.redhat.sound |
|---|---|
| Message-ID | <[email protected]> |
Hello,
I have installed my Redhat linux 8.0 version . The sound card did
not got detected.
I ran setup -> sound card configuration utility ( sndconfig) and I
could hear the sample audio. But still the device/card didn't got
recognized.
The syslog has following information :
Jan 7 23:38:20 localhost rc.sysinit: Finding module dependencies:
succeeded
Jan 7 23:38:51 localhost sshd:
Jan 7 23:38:21 localhost modprobe:
/lib/modules/2.4.18-19.8.0/kernel/drivers/sound/mad16.o:
Jan 7 23:38:51 localhost rc: Starting sshd: succeeded
Jan 7 23:38:21 localhost modprobe: Hint: insmod errors can be caused by
incorrect module parameters, including invalid IO or IRQ parameters.
Jan 7 23:38:21 localhost modprobe: You may find more information
in syslog or the output from dmesg
Jan 7 23:38:21 localhost modprobe: init_module: No such device
Jan 7 23:38:21 localhost modprobe:
/lib/modules/2.4.18-19.8.0/kernel/drivers/sound/mad16.o: insmod
/lib/modules/2.4.18-19.8.0/kernel/drivers/sound/mad16.o failed
Jan 7 23:38:21 localhost modprobe:
/lib/modules/2.4.18-19.8.0/kernel/drivers/sound/mad16.o: insmod
sound-slot-0 failed
Jan 7 23:38:21 localhost rc.sysinit: Loading sound module (mad16): failed
Also , cat /proc/isapnp has following info
Logical device 0 'OPTffff:AUX0'
Device is not active
Logical device 1 'OPT9310:OPTi Audio 16'
Device is not active
Active port ,0xe00
Resources 0
Priority acceptable
Port 0x534-0x608, align 0x3, size 0x4, 16-bit address decoding
Port 0x380-0x3f0, align 0xf, size 0xc, 16-bit address decoding
Port 0x220-0x240, align 0x1f, size 0x10, 16-bit address decoding
Port 0xe0c-0xffc, align 0x3, size 0x4, 16-bit address decoding
IRQ 5,7,10 High-Edge
DMA 0,1,3 8-bit byte-count type-A
DMA 0,1,3,5,6 8-bit&16-bit byte-count word-count type-A
Alternate resources 0:1
Priority acceptable
Port 0x534-0xff0, align 0x3, size 0x4, 16-bit address decoding
Port 0x380-0x3f0, align 0xf, size 0xc, 16-bit address decoding
Port 0x220-0x240, align 0x1f, size 0x10, 16-bit address decoding
Port 0xe0c-0xffc, align 0x3, size 0x4, 16-bit address decoding
IRQ 5,7,2/9,10,11 High-Edge
DMA 0,1,3,5,6 8-bit&16-bit byte-count word-count type-A
DMA 0,1,3,5,6 8-bit&16-bit byte-count word-count type-A
Alternate resources 0:2
Priority acceptable
Port 0x534-0x608, align 0x3, size 0x4, 16-bit address decoding
Port 0x380-0x3f0, align 0xf, size 0xc, 16-bit address decoding
Port 0x220-0x240, align 0x1f, size 0x10, 16-bit address decoding
Port 0xe0c-0xffc, align 0x3, size 0x4, 16-bit address decoding
IRQ 5,7,10 High-Edge
DMA 0,1,3 8-bit byte-count type-A
DMA 0,1,3 8-bit byte-count type-A
Alternate resources 0:3
Priority acceptable
Port 0x534-0xff0, align 0x3, size 0x4, 16-bit address decoding
Port 0x380-0x3f0, align 0xf, size 0xc, 16-bit address decoding
Port 0x220-0x240, align 0x1f, size 0x10, 16-bit address decoding
Port 0xe0c-0xffc, align 0x3, size 0x4, 16-bit address decoding
IRQ 5,7,2/9,10,11 High-Edge
DMA 0,1,3 8-bit byte-count type-A
DMA 0,1,3 8-bit byte-count type-A
Alternate resources 0:4
Priority acceptable
Port 0x534-0xff0, align 0x3, size 0x4, 16-bit address decoding
Port 0x380-0x3f0, align 0xf, size 0xc, 16-bit address decoding
Port 0x220-0x240, align 0x1f, size 0x10, 16-bit address decoding
Port 0xe0c-0xffc, align 0x3, size 0x4, 16-bit address decoding
IRQ 5,7,2/9,10,11 High-Edge
DMA 0,1,3 8-bit byte-count type-A
Logical device 2 'OPT0001:Game Port'
Device is not active
Resources 0
Priority preferred
Port 0x200-0x20f, align 0x0, size 0x1, 16-bit address decoding
Logical device 3 'OPT0002:MPU401'
Device is not active
Resources 0
Priority preferred
Port 0x300-0x360, align 0xf, size 0x2, 16-bit address decoding
IRQ 5,7,2/9,10,11 High-Edge
Please help.