Problem with Audio integrated on Laptop Acer TravelMate 630.
Baccanelli Massimo <[email protected]>
| Newsgroups | gmane.linux.redhat.sound |
|---|---|
| Organization | Sorint S.a.S. |
| Message-ID | <[email protected]> |
Description of problem: The kernel 2.4.18 not load sound module.
I am using a [ALi] M5451 PCI AC-Link Controller Audio sound
on board Acer TravelMate 630 (LapTop) motherboard.
My redhat 8 distribution is working just fine in every respect except
for the sound device.
Actually the setup program recognizes the sound device but I can't hear
the test. message.
Please help me with an useful information.
Thanx
+---------------------------------------------------------------------------------------+
System:
Linux acer630 2.4.18-19.8.0 #1 Thu Dec 12 05:39:29 EST 2002 i686 i686 i386
GNU/Linux
Stat File System:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/hda2 5036316 1776312 3004172 38% /
/dev/hda5 8001020 42928 7551652 1% /data
none 127200 0 127200 0% /dev/shm
monster:/ 3020172 2386592 480160 84% /remote/monster
monster:/data 10947956 6399764 4548192 59% /remote/monster/data
Load Module:
Module Size Used by Not tainted
ac97_codec 13416 0
nfs 82564 2 (autoclean)
lockd 58064 1 (autoclean) [nfs]
sunrpc 79324 1 (autoclean) [nfs lockd]
ide-cd 33608 0 (autoclean)
cdrom 33696 0 (autoclean) [ide-cd]
autofs 13348 0 (autoclean) (unused)
ds 8712 2
yenta_socket 12960 2
pcmcia_core 54784 0 [ds yenta_socket]
8139too 17704 1
mii 2156 0 [8139too]
iptable_filter 2412 0 (autoclean) (unused)
ip_tables 14936 1 [iptable_filter]
mousedev 5524 1
keybdev 2976 0 (unused)
hid 22244 0 (unused)
input 5920 0 [mousedev keybdev hid]
usb-ohci 21320 0 (unused)
usbcore 77024 1 [hid usb-ohci]
ext3 70336 2
jbd 52212 2 [ext3]
Error mssg.:
/lib/modules/2.4.18-19.8.0/kernel/drivers/sound/i810_audio.o: init_module: No
such device
/lib/modules/2.4.18-19.8.0/kernel/drivers/sound/i810_audio.o: insmod
/lib/modules/2.4.18-19.8.0/kernel/drivers/sound/i810_audio.o failed
/lib/modules/2.4.18-19.8.0/kernel/drivers/sound/i810_audio.o: insmod
i810_audio failed
Hint: insmod errors can be caused by incorrect module parameters, including
invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
Output of dmesg:
Linux version 2.4.18-19.8.0 ([email protected]) (gcc
version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Thu Dec 12 05:39:29 EST
2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fef0000 (usable)
BIOS-e820: 000000000fef0000 - 000000000feff000 (ACPI data)
BIOS-e820: 000000000feff000 - 000000000ff00000 (ACPI NVS)
BIOS-e820: 000000000ff00000 - 0000000010000000 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
254MB LOWMEM available.
On node 0 totalpages: 65264
zone(0): 4096 pages.
zone(1): 61168 pages.
zone(2): 0 pages.
Kernel command line: ro root=LABEL=/
Initializing CPU#0
Detected 1195.511 MHz processor.
Speakup v-1.00 CVS: Tue Jun 11 14:22:53 EDT 2002 : initialized
Console: colour VGA+ 80x25
Calibrating delay loop... 2366.82 BogoMIPS
Memory: 252064k/261056k available (1314k kernel code, 6568k reserved, 989k
data, 172k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 4096 (order: 3, 32768 bytes)
ramfs: mounted with options: <defaults>
ramfs: max_pages=31762 max_file_pages=0 max_inodes=0 max_dentries=31762
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 3febf9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 0K, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After vendor init, caps: 3febf9ff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 3febf9ff 00000000 00000000 00000000
CPU: Common caps: 3febf9ff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.60GHz stepping 04
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([email protected])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfd61e, last bus=3
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router ALI [10b9/1533] at 00:07.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
speakup: initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
PCI: Found IRQ 11 for device 00:08.0
Redundant entry in serial pci_table. Please send the output of
lspci -vv, this message (10b9,5457,1025,102b)
and the manufacturer and name of serial board or modem board
to [email protected].
register_serial(): autoconfig failed
Real Time Clock Driver v1.10e
block: 480 slots per queue, batch=120
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller on PCI bus 00 dev 80
PCI: No IRQ known for interrupt pin A of device 00:10.0. Please try using
pci=biosirq.
ALI15X3: chipset revision 196
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2480-0x2487, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x2488-0x248f, BIOS settings: hdc:DMA, hdd:pio
hda: IC25N020ATCS04-0, ATA DISK drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hdc: MATSHITADVD-ROM SR-8176, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 39070080 sectors (20004 MB) w/1768KiB Cache, CHS=2432/255/63, (U)DMA
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 hda3 hda4 < hda5 >
FDC 0 is a post-1991 82077
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 126k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 172k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 11 for device 00:0f.0
usb-ohci.c: USB OHCI at membase 0xd0849000, IRQ 11
usb-ohci.c: usb-00:0f.0, Acer Laboratories Inc. [ALi] USB 1.1 Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 11 for device 00:14.0
usb-ohci.c: USB OHCI at membase 0xd084b000, IRQ 11
usb-ohci.c: usb-00:14.0, Acer Laboratories Inc. [ALi] USB 1.1 Controller (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[email protected]>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,2), internal journal
Adding Swap: 522104k swap-space (priority -1)
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,5), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
ohci1394: $Revision: 1.101 $ Ben Collins <[email protected]>
PCI: Found IRQ 11 for device 00:0b.0
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[e0002800-e0003000] Max
Packet=[2048]
ip_tables: (C) 2000-2002 Netfilter core team
8139too Fast Ethernet driver 0.9.25
PCI: Found IRQ 11 for device 00:0a.0
divert: allocating divert_blk for eth0
eth0: RealTek RTL8139 Fast Ethernet at 0xd08bf000, 00:00:e2:70:5e:2b, IRQ 11
eth0: Identified 8139 chip type 'RTL-8139C'
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability
45e1.
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: Assigned IRQ 10 for device 00:13.0
PCI: Sharing IRQ 10 with 00:13.1
PCI: Found IRQ 10 for device 00:13.1
PCI: Sharing IRQ 10 with 00:13.0
Yenta IRQ list 02b8, PCI irq10
Socket status: 30000006
Yenta IRQ list 02b8, PCI irq10
Socket status: 30000410
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x408-0x40f 0x480-0x48f
0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
ide-floppy driver 0.99.newide
hdc: ATAPI 24X DVD-ROM drive, 256kB Cache
Uniform CD-ROM driver Revision: 3.12
cdrom: This disc doesn't have any tracks I recognize!
Intel 810 + AC97 Audio, version 0.22, 05:48:44 Dec 12 2002
+---------------------------------------------------------------------------------------+
Please help me with an useful information.
Thanx
--
Massimo Baccanelli
Senior Consultant
sede di Curno
via Bergamo, 15a
24035 Curno (Bergamo)
tel.: +(39) 035.697532
fax.: +(39) 035.697590
cell.: +(39) 335.1331841
mail: [email protected]
www: www.sorint.it