Re: Sound-list digest, Vol 1 #511 - 2 msgs
vivek <[email protected]> Fri, 04 Apr 2003 23:01:19 +0600
| Newsgroups | gmane.linux.redhat.sound |
|---|---|
| Organization | Poornam Info Vision Pvt Ltd |
| Message-ID | <[email protected]> |
Hi Bill,
I tried a work around. I removed my pci 64 card from the
mother board.
I downloaded sndconfig and tried a manual configuration.
the device was detected to be
*VIA technologies, VT8233 AC97 Audio Controller,*
which is correct, 'cause it works well on my windows installation.
But as the driver installation continued, sndconfig gave me this error,
The following error occurred running the modprobe program: ?
? ?
?
/lib/modules/2.4.18-14/kernel/drivers/sound/via82cxxx_audio.o: ?
? init_module: No such
device ?
?
/lib/modules/2.4.18-14/kernel/drivers/sound/via82cxxx_audio.o: ?
?
insmod ?
?
/lib/modules/2.4.18-14/kernel/drivers/sound/via82cxxx_audio.o ?
?
failed ?
?
/lib/modules/2.4.18-14/kernel/drivers/sound/via82cxxx_audio.o: ?
? insmod sound-slot-0 failed
The same error was detected when I manually ran modprobe.
Let me know if you have any clue to this.
guess u cud try configuring ur sound card with sndconfig, or select the
driver
manually from the list or try running ~# modprobe emu10k1
regards,
Vivek
[email protected] wrote:
>Send Sound-list mailing list submissions to
> [email protected]
>
>To subscribe or unsubscribe via the World Wide Web, visit
> https://listman.redhat.com/mailman/listinfo/sound-list
>or, via email, send a message with subject or body 'help' to
> [email protected]
>
>You can reach the person managing the list at
> [email protected]
>
>When replying, please edit your Subject line so it is more specific
>than "Re: Contents of Sound-list digest..."
>
>
>
>------------------------------------------------------------------------
>
>Today's Topics:
>
> 1. RH 8.0 sound configuration problem (vivek)
> 2. Re: RH 8.0 sound configuration problem (Bill Nottingham)
>
>
>
> ------------------------------------------------------------------------
>
> Subject:
> [Sound] RH 8.0 sound configuration problem
> From:
> vivek <[email protected]>
> Date:
> Fri, 04 Apr 2003 10:20:45 +0600
> To:
> [email protected]
>
>
> *Hi,
> I have the same problem with my pci64 soundblaster live card.
> RH 8.0 detects my card as VIA technologies, VT8233 AC97 Audio Controller,
> and it is loading the module via82cxxx_audio.
> When I play the test sound, the sound doesnt seem to play.
> My card is PCI 64 SOUND BLASTER LIVE!
> I had recently changed my mother board, therefore I have some doubt
> if there is anything wrong with the jumper settings. It is an onboard
> supported board with display and everything built into it.
>
> What is the correct module for this card.
>
> Here are the list of modules in the kernel sound modules directory :
>
> ls -al /lib/modules/2.4.18-14/kernel/drivers/sound/
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> ac97_codec.o btaudio.o gus.o
> msnd_pinnacle.o
> sb.o uart6850.o
> ac97.o cmpci.o i810_audio.o
> nm256_audio.o
> sgalaxy.o via82cxxx_audio.o
> aci.o cs4232.o mad16.o
> opl3.o
> sonicvibes.o v_midi.o
> ad1816.o cs4281 maestro3.o
> opl3sa2.o
> soundcore.o wavefront.o
> ad1848.o cs46xx.o maestro.o
> opl3sa.o
> sound.o ymfpci.o
> adlib_card.o emu10k1 maui.o
> pas2.o
> sscape.o
> aedsp16.o es1370.o mpu401.o
> pss.o
> trident.o
> audigy es1371.o msnd_classic.o
> rme96xx.o
> trix.o
> awe_wave.o esssolo1.o msnd.o
> sb_lib.o
> uart401.o
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> When I load the sb.o driver, it gives me the following error message :
>
> /lib/modules/2.4.18-14/kernel/drivers/sound/sb.o: init_module: No such
> device
> Hint: insmod errors can be caused by incorrect module parameters,
> including
> invalid IO or IRQ parameters.
> You may find more information in syslog or the output from dmesg
> /lib/modules/2.4.18-14/kernel/drivers/sound/sb.o: insmod
> /lib/modules/2.4.18-14/kernel/drivers/sound/sb.o failed
> /lib/modules/2.4.18-14/kernel/drivers/sound/sb.o: insmod sb failed
>
> My card had no problems running with the earlier versions of redhat I
> had,
> which was RH 6.1, but I dont remember the module I used with that.
>
> Please let me know what I must do in this case.
> --
> Vivek Prasannan
> Systems Administrator
> http://vivekonline.net
> http://poornam.com
> http://bobcares.com *
> ------------------------------------------------------------------------
>
> Subject:
> [Sound] Re: RH 8.0 sound configuration problem
> From:
> Bill Nottingham <[email protected]>
> Date:
> Fri, 4 Apr 2003 00:33:39 -0500
> To:
> [email protected]
>
>
>vivek ([email protected]) said:
>
>
>> I have the same problem with my pci64 soundblaster live card.
>>RH 8.0 detects my card as VIA technologies, VT8233 AC97 Audio Controller,
>>and it is loading the module via82cxxx_audio.
>>When I play the test sound, the sound doesnt seem to play.
>>My card is PCI 64 SOUND BLASTER LIVE!
>>
>>
>
>Hm, your motherboard probably has built-in audio as well, that's
>where the VIA dectection is coming in.
>
>
>
>>I had recently changed my mother board, therefore I have some doubt
>>if there is anything wrong with the jumper settings. It is an onboard
>>supported board with display and everything built into it.
>>
>>What is the correct module for this card.
>>
>>
>
>emu10k1 is the module for a SB Live.
>
>Bill
>
>
>
>
>
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Sound-list mailing list
>[email protected]
>https://listman.redhat.com/mailman/listinfo/sound-list
>
>
>