i810_audio, RedHat 9, and Intel D850EMV2 mb
[email protected] Tue, 10 Jun 2003 20:34:50 -0700 (GMT)
| Newsgroups | gmane.linux.redhat.sound |
|---|---|
| Message-ID | <6336858.1055302489102.JavaMail.nobody@louie.psp.pas.earthlink.net> |
I'm running RedHat 9.0 on a system with an Intel D850EMV2 motherboard. The sound driver seems to have a slight problem. I cold boot the machine with an audio CD in the drive, then start the CD Player. No sound. So I run redhat-config-soundcard. Sound! Then I reboot and try the CD Player again. No sound! I played around a while and discovered that all you need to do to make the sound card listen to the CD drive is to play a wav file first. So, I put the following in /etc/rc.d/init: /usr/bin/play -d /dev/dsp /usr/share/redhat-config-soundcard/redhat-sample.wav -v 2 Everything works. I suppose a more elegant solution would be to have the driver, i810_audio genlty tap the sound card some time late in the initialization. I recompiled my own kernel with 2.4.20-13.9 and the i686 options. The only change I made in make xconfig was to add support for reading NTFS file systems. Should turn on the debugging messages in /usr/src/linux-2.4/drivers/sound/i810_audio.c and recompile? Regards, George Geller -- Sound-list mailing list [email protected] https://www.redhat.com/mailman/listinfo/sound-list