Re: Re: i810 Audio driver=disabled
Jean-Alexander Mueller <[email protected]> Tue, 01 Jul 2003 22:12:26 +0200
| Newsgroups | gmane.linux.redhat.sound |
|---|---|
| Organization | Rechnernetze und VS, Informatik, Universitä t Leipzig |
| Message-ID | <[email protected]> |
Bill Nottingham wrote: > Jean-Alexander Mueller ([email protected]) said: > >>Hi everybody. >> >>I have a Asus M2400N notebook with Intel ICH 4 architecture. >> >>sndconfig identifies: >>"Intel Corp. |82801DB AC'97 Audio" >> >>BUT complains ... (original in german, thus probalby not exact) >>"... is usualy supported, but currently deactivated. You can eventually >>solve the problem by changing the BIOS settings to NO PNP OS." >> >>Well, I would try that, but the BIOS does not support that. :-( > > > What happens if you just load the module? It tells, that it is unable to allocate irq 0. There is no option to set an IRQ, so far. So here is what I did and the results: insmod soundcore ok insmod ac97_codec ok insmod i810_audio fails >> Using /lib/modules/2.4.20-18.9/kernel/drivers/sound/i810_audio.o PCI: No IRQ known for interrupt pin B of device 00:1f.5. i810_audio: unable to allocate irq 0 /lib/modules/2.4.20-18.9/kernel/drivers/sound/i810_audio.o: init_module: No such device -------------- dmesg output Intel 810 + AC97 Audio, version 0.24, 07:13:38 May 29 2003 PCI: No IRQ known for interrupt pin B of device 00:1f.5. PCI: Setting latency timer of device 00:1f.5 to 64 i810: Intel ICH4 found at IO 0xe100 and 0xe000, MEM 0x1f800400 and 0x1f800600, IRQ 0 i810_audio: unable to allocate irq 0 -------------- cat /proc/interrupts 0: 49107 XT-PIC timer 1: 907 XT-PIC keyboard 2: 0 XT-PIC cascade 4: 0 XT-PIC ehci-hcd 5: 1508 XT-PIC usb-uhci, usb-uhci, usb-uhci, ohci1394, eth0 8: 1 XT-PIC rtc 14: 8071 XT-PIC ide0 15: 36 XT-PIC ide1 NMI: 0 ERR: 0 ------------------------ Well, I wonder, why only IRQ 5 is used, but anyway, lots of IRQs are free to use. -- Sound-list mailing list [email protected] https://www.redhat.com/mailman/listinfo/sound-list