Re: Problem with nVidia MCP51 HDA

hi... Try first in windows how it's behaving..?
On Tue, 21 Nov 2006 23:08:02 -0500, Jason Smith <[email protected]=
> =20
wrote:

> Hello,
>
> I've recently purchased an Asus M2NPV-VM mainboard. I'm using the
> on-board sound with HDA turned on in the BIOS. The problem that I'm
> having is that when I try to change the volume using Volume Control
> 2.16.1 or any other change the audio stops even though the player shows
> the audio still playing. The only way to be able to hear audio from the
> speakers again is to reboot. If I stop the audio before changing the
> volume then restart the audio I still hear audio. I've done a couple of
> quick test with both XMMS and mpg321.
>
> I'm running Fedora Core 6 on an AMD Athlon(tm) 64 X2 Dual Core Processo=
r
> 4200+ using kernel 2.6.18-1.2849.fc6.
>
> Here's a list of the modules that get loaded for sound.
>
> [root@x2 ~]# lsmod | grep snd
> snd_hda_intel          53725  3
> snd_hda_codec         223681  1 snd_hda_intel
> snd_seq_dummy          37317  0
> snd_seq_oss            69953  0
> snd_seq_midi_event     41921  1 snd_seq_oss
> snd_seq                96609  5
> snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
> snd_seq_device         42581  3 snd_seq_dummy,snd_seq_oss,snd_seq
> snd_pcm_oss            81761  0
> snd_mixer_oss          51649  1 snd_pcm_oss
> snd_pcm               125129  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
> snd_timer              59849  2 snd_seq,snd_pcm
> snd                   101737  15
> snd_hda_intel,snd_hda_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_=
oss,snd_mixer_oss,snd_pcm,snd_timer
> soundcore              44769  1 snd
> snd_page_alloc         44113  2 snd_hda_intel,snd_pcm
>
> lspci -vv for the audio portion
> 00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio
> (rev a2)
>         Subsystem: ASUSTeK Computer Inc. Unknown device 81cb
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
>         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=3Dfast >TAbort=
-
> <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0 (500ns min, 1250ns max)
>         Interrupt: pin B routed to IRQ 209
>         Region 0: Memory at fe024000 (32-bit, non-prefetchable)
> [size=3D16K]
>         Capabilities: [44] Power Management version 2
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA
> PME(D0-,D1-,D2-,D3hot+,D3cold+)
>                 Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME-
>         Capabilities: [50] Message Signalled Interrupts: 64bit+
> Queue=3D0/0 Enable-
>                 Address: 0000000000000000  Data: 0000
>         Capabilities: [6c] HyperTransport: MSI Mapping
>
> Any help of any kind would be greatly appreciated. If you want me to ru=
n
> some commands, load some new software just let me know.
>
> Thanks,
> Jason



--=20
/////////////////////////////////////////////////////////////////////////=
//
A friend in need is a friend in deed
/////////////////////////////////////////////////////////////////////////=
//


--
Sound-list mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/sound-list