RE: install RHEL on Compaq Proliant ML 350 fails?

Hello Jeff,

I was able to install RHEL 3.0 beta 2 on the ML350 600 Mhz machine using 
the CD-ROM drive of the ML350 733Mhz machine.
So the problem seems to be the CD-ROM drive of the 600MHz ML350 !

ML350 600MHz ==> Compaq CDR-8435 Atapi CDRom
ML350 733MHz ==> Compaq CRD-8402B Atapi CDRom

Werner

At 11:01 7/10/2003, Kopp, Jeffery wrote:
>What happens if you swap out the CD-ROMs between to the two boxes?  Or can 
>you do a network install to the failing box?  I suspect this is a similar 
>problem to the CD installs of RH9 on many of the ProLiant servers.
>
>Jeff
>
>  -----Original Message-----
>From:   werner maes [mailto:[email protected]]
>Sent:   Tuesday, October 07, 2003 3:51 AM
>To:     [email protected]
>Subject:        RE: install RHEL on Compaq Proliant ML 350 fails?
>
>I can confirm now that the installatie of RHEL 3.0 beta 2 works fine on a
>ML350 733Mhz.
>BUT it does NOT seem to work on a ML350 600EB Mhz.
>
>Werner
>
>ps: I bought the 733 Mhz a half year after the 600Mhz machine...
>
>At 10:20 7/10/2003, you wrote:
> >Jeff,
> >
> >This is my configuration:
> >
> >ML350
> >256 Mb RAM
> >1 x Pentium III 600EB MHz/256KB
> >D02/F02 (05/30/2003)
> >
> >install procedure starts but hangs when selecting local cdrom as
> >installation medium.
> >
> >Werner
> >
> >ps: we also have an ML350 733 Mhz. I'll try it out on that machine and let
> >you know.
> >
> >At 13:30 6/10/2003, Kopp, Jeffery wrote:
> >>We have a ML350G1 and the install went fine.  Here is the configuration:
> >>
> >>256MB RAM
> >>1x Pentium III 866MHz/256KB
> >>D02/F02 (05/30/2003)
> >>NC6770 NIC
> >>
> >>Jeff
> >>


--
Taroon-beta-list mailing list
[email protected]
http://www.redhat.com/mailman/listinfo/taroon-beta-list