| Newsgroups |
gmane.linux.redhat.xfree86 |
| Message-ID |
<[email protected]> |
Hi all,
I am having a strange problem with the X server of my laptop (IBM
Thinkpad T30 - ATI Radeon Mobility M7 LW). I am using the X server that
comes by default with RedHat 8.0.
All of a sudden, my X server starts eating up 99->100% of CPU time. And
the laptop stops responding completely. Surprisingly, it responds to
mouse movements. But that's about it. [And, of course, I can remotely
connect to it, and see that X is taking up all CPU! On the laptop
itself, I can't do a thing because none of my keyboard actions work!!]
I have noticed that this event is caused most of the times by mouse
movements - always mouse drag actions (e.g., moving of a window,
resizing etc.) However, I have had this happen some times with keyboard
actions also (e.g., keyboard actions which result in workspace changes,
etc.).
I have no idea what the problem is. Is there a bug in the IBM touchpad
driver or something - just a wild guess! I would really appreciate any
help - I am really tired of rebooting my laptop every so often because
of X hanging.
Attached is the 'top' output on my laptop. I have also attached
XF86Config - if that is useful.
Thanks in advance,
Ashwin
------ Output of 'top' ----------------------------------------------
1043 root 19 0 63192 35M 11272 R 99.6 14.0 2:03 X
3621 ashu 11 0 924 924 732 R 0.3 0.3 0:00 top
1 root 8 0 480 480 428 S 0.0 0.1 0:04 init
2 root 9 0 0 0 0 SW 0.0 0.0 0:00 keventd
3 root 9 0 0 0 0 SW 0.0 0.0 0:00 kapmd
4 root 19 19 0 0 0 SWN 0.0 0.0 0:00 ksoftirqd_CPU0
5 root 9 0 0 0 0 SW 0.0 0.0 0:00 kswapd
------ End output ----------------------------------------------------
------ XF86Config ----------------------------------------------------
# File generated by anaconda.
Section "ServerLayout"
Identifier "Anaconda Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Mouse1" "SendCoreEvents"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "dri"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
# Option "AutoRepeat" "500 5"
# when using XQUEUE, comment out the above line, and uncomment the
# following line
# Option "Protocol" "Xqueue"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
#Option "XkbVariant" ""
#Option "XkbOptions" ""
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "IMPS/2"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 31.5-48.5
VertRefresh 40-70
Option "dpms"
EndSection
Section "Device"
# no known options
Identifier "ATI Radeon Mobility 7500"
Driver "radeon"
VendorName "ATI Radeon Mobility 7500"
BoardName "ATI Radeon Mobility 7500"
Option "BackingStore" "yes"
#BusID
EndSection
Section "Screen"
Identifier "Screen0"
Device "ATI Radeon Mobility 7500"
Monitor "Monitor0"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubsection
EndSection
Section "DRI"
Mode 0666
EndSection
------ End XF86Config -------------------------------------------
_______________________________________________
xfree86-list mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/xfree86-list
IRC: #xfree86 on irc.redhat.com