Re: Radeon 7500 All-in-Wonder w/RH8.0
Adam Polkosnik <[email protected]>
| Newsgroups | gmane.linux.redhat.xfree86 |
|---|---|
| Organization | HPI International, Inc. |
| Message-ID | <[email protected]> |
Maybe your monitor will do 1600x1200@60Hz, but it won't sync on anything
higher?
I'd suggest playing with these values:
HorizSync 30.1-95.1
VertRefresh 60.1-160.1
Roland Roberts wrote:
>-----BEGIN PGP SIGNED MESSAGE-----
>
>
>
>>>>>>"Mike" == Mike A Harris <[email protected]> writes:
>>>>>>
>>>>>>
>
> Mike> Remove the KVM completely. Then configure X and test it.
> Mike> Then put the KVM back. If the operation of X with the KVM
> Mike> does not match the operation of X with the KVM, then buy a
> Mike> new KVM.
>
>I tried this, but there is no difference; I connected the monitor,
>mouse, and keyboard directly to the host and then powered up the
>machine. The monitor won't sync with the card at 1600x1200 or
>1400x1050. As I've mentioned before, the monitor *will* do 1600x1200
>with my Matrox G200, so I'm confident this is not a monitor issue.
>
>Any other suggestions?
>
>roland
>
>
_______________________________________________
xfree86-list mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/xfree86-list
IRC: #xfree86 on irc.redhat.com