4.3.0-5 patch

Hi,
I have a radeon 9000 on RH 9 and I just installed the 4.3.0-5 patch to try to 
get my xinerama config working.  unfortunately it didn't quite do the trick.  
It must be somewhere in my config.  I have pasted the config here for people 
to look over.  What I have found odd, is that when I check the XFree86.0.log 
file it is complaining about PCI:1:5:1 which it has never done.  I have tried 
to edit the configuration for that device and nothing has changed.  
Anyone have words of wisdom ?

Thanks.

---snip---
(II) Primary Device is: PCI 01:05:0
(WW) RADEON: No matching Device section for instance (BusID PCI:1:5:1) found
--snip--

# XFree86 4 configuration created by redhat-config-xfree86

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "Screen0" 0 0
	Screen	    1  "Screen1" RightOf "Screen0"
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
	InputDevice    "DevInputMice" "AlwaysCore"
	Option         "Xinerama" "on"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.  Note, this is the name of the 
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	FontPath     "unix/:7100"
EndSection

Section "Module"
	Load  "dbe"
	Load  "extmod"
	Load  "fbdevhw"
	Load  "glx"
	Load  "record"
	Load  "freetype"
	Load  "type1"
	#Load  "dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:swapcaps"
# Or if you just want both to be control, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
#
	Identifier  "Keyboard0"
	Driver      "keyboard"
	Option	    "XkbRules" "xfree86"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "us"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/psaux"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "no"
EndSection

Section "InputDevice"

# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
	Identifier  "DevInputMice"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "no"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "KDS VS-7p"
	HorizSync    30.0 - 72.0
	VertRefresh  50.0 - 160.0
	Option	    "dpms"
EndSection

Section "Monitor"
	Identifier   "Monitor1"
	VendorName   "Monitor Vendor"
        ModelName    "KDS VS-7p"
        HorizSync    30.0 - 72.0
        VertRefresh  50.0 - 160.0
        Option      "dpms"
EndSection

Section "Device"
	Identifier  "Radeon-vga"
	Driver      "radeon"
	VendorName  "Videocard vendor"
	BoardName   "ATI Radeon 9000"
	BusID       "PCI:1:5:0"
	Screen	0
EndSection
Section "Device"
	Identifier "Radeon-dvi"
	Driver     "radeon"
	VendorName "Videocard vendor"
	BoardName  "Ati Radeon 9000"
	BusID      "PCI:1:5:0"
	Screen     1
EndSection


Section "Screen"
	Identifier "Screen0"
	Device     "radeon-vga"
	Monitor    "Monitor0"
	DefaultDepth     16
	SubSection "Display"
		Depth     16
		Modes    "1024x768" 
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen1"
	Device	   "radeon-dvi"
	Monitor    "Monitor1"
	DefaultDepth    16
	SubSection "Display"
		Depth    16
		Modes    "1024x768"
	EndSubSection
EndSection

 



_______________________________________________
xfree86-list mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/xfree86-list
IRC: #xfree86 on irc.redhat.com