X doesn't work after upgrade to RH9

To All,
I just upgraded my Dell Latitude C800 from RH7.2 to RH9. While the
upgrade appeared to have gone perfectly, when I rebooted X won't
startup, yielding an error of "no screens found". The laptop has
an ATI Rage 128 Mobility M4 card. I've gone through and looked at the
XF86Config-4 (see below) and compared it with the rpmsave version,
and the two are largely the same, but 7.2 worked fine.

For what it's worth, I used the graphical install, and everything
worked fine. Anyone have insights on this?

Pete Schuyler

**********************

# File generated by anaconda.

Section "ServerLayout"
        Identifier     "Anaconda Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath     "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

    FontPath   "unix/:7100"

EndSection

Section "Module"
        Load  "GLcore"
        Load  "dbe"
        Load  "extmod"
        Load "fbdevhw"
        Load "dri"
        Load  "glx"
        Load  "record"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "keyboard"

#       Option  "AutoRepeat"    "500 5"

# when using XQUEUE, comment out the above line, and uncomment the
# following line
#       Option  "Protocol"      "Xqueue"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#       Option  "Xleds"         "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
#       Option  "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#       Option  "XkbModel"      "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#       Option  "XkbModel"      "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#       Option  "XkbLayout"     "de"
# or:
#       Option  "XkbLayout"     "de"
#       Option  "XkbVariant"    "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#       Option  "XkbOptions"    "ctrl:nocaps"
        Option  "XkbRules"      "xfree86"
        Option  "XkbModel"      "pc105"
        Option  "XkbLayout"     "us"
        #Option "XkbVariant"    ""
        #Option "XkbOptions"    ""
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "PS/2"
        Option      "Device" "/dev/psaux"
        Option      "ZAxisMapping" "4 5"
        Option      "Emulate3Buttons" "yes"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
        HorizSync   31.5-48.5
        VertRefresh 50-70
        Option "dpms"

        # -- 1400x1050 --
        # 1400x1050 @ 60Hz, 65.8 kHz hsync
        Modeline "1400x1050"  129   1400 1464 1656 1960
                              1050 1051 1054 1100 +HSync +VSync

        # 1400x1050 @ 70Hz, 76.8 kHz hsync
        Modeline "1400x1050"  151   1400 1464 1656 1960
                              1050 1051 1054 1100 +HSync +VSync

        # 1400x1050 @ 75Hz, 82.3 kHz hsync
        Modeline "1400x1050"  162   1400 1464 1656 1960
                              1050 1051 1054 1100 +HSync +VSync

        # 1400x1050 @ 85Hz, 93.2 kHz hsync
        Modeline "1400x1050"  184   1400 1464 1656 1960
                              1050 1051 1054 1100 +HSync +VSync

EndSection

Section "Device"
        # no known options
        Identifier   "ATI Rage 128 Mobility"
        Driver       "r128"
        VendorName   "ATI Rage 128 Mobility"
        BoardName     "ATI Rage 128 Mobility"
       
        #BusID
EndSection

Section "Screen"
        Identifier   "Screen0"
        Device       "ATI Rage 128 Mobility"
        Monitor      "Monitor0"
        DefaultDepth    16

        Subsection "Display"
                Depth       16
                Modes       "1152x864"
        EndSubsection

EndSection

Section "DRI"
        Mode 0666
EndSection
 



_______________________________________________
xfree86-list mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/xfree86-list
IRC: #xfree86 on irc.redhat.com