[PATCH v12 6/6] arm64: dts: qcom: lemans: Add OPP-table for ICE UFS device node
Abhinaba Rakshit <[email protected]>
| Newsgroups | gmane.linux.drivers.devicetree,gmane.linux.ports.arm.msm,gmane.linux.kernel,gmane.linux.scsi,gmane.linux.kernel.mmc |
|---|---|
| Message-ID | <20260824-enable-ice-clock-scaling-v12-6-09271f583dc6@oss.qualcomm.com> |
Qualcomm Inline Crypto Engine (ICE) platform driver now supports an optional OPP-table. Add OPP-table for ICE UFS device nodes for LeMans platform. Reviewed-by: Kuldeep Singh <[email protected]> Signed-off-by: Abhinaba Rakshit <[email protected]> --- arch/arm64/boot/dts/qcom/lemans.dtsi | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi index a10322c5bc35754042640d56ecb556a5ed5cf281..40d13ba5f785bc712b511870b94cfa9c6518c19f 100644 --- a/arch/arm64/boot/dts/qcom/lemans.dtsi +++ b/arch/arm64/boot/dts/qcom/lemans.dtsi @@ -3109,6 +3109,32 @@ ice: crypto@1d88000 { clock-names = "core", "iface"; power-domains = <&gcc UFS_PHY_GDSC>; + + operating-points-v2 = <&ice_opp_table>; + + ice_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; }; cryptobam: dma-controller@1dc4000 { -- 2.34.1