RE: [sentinix-list] Sentinix .iso image booting problems
"Francis McPhail" <Francis.McPhail-mbwxT/[email protected]> Fri, 14 May 2004 08:40:22 +1000
| Newsgroups | gmane.linux.sentinix |
|---|---|
| Message-ID | <577F6355523DC04CA793464070E07DE5264C88@melserv-01.blueapache.com.au> |
Is there an ETA on the 0.71 release even if it's just the re-configuration of the .iso boot size to 4? -----Original Message----- From: Michel Blomgren [mailto:[email protected]] Sent: Wednesday, 12 May 2004 10:23 AM To: The SENTINIX Mailing List Subject: Re: [sentinix-list] Sentinix .iso image booting problems 2003-12-12: Non-bootable ISO problem! The SENTINIX 0.70.5 and Beta 01 ISO images were created with boot-size 32, but some picky BIOSes wants only boot-size 4. Why did I do 32? because a real early version of SENTINIX wouldn't boot with 4, 8 or 16 on an old PC of mine, but now boot-size 4 seems to be working fine on that one. 4 is what everone recommends, so it'll show up in SENTINIX 0.71, but until then, if you experience this problem and really want to test it, try booting the CD on whole different PC (with different BIOS) or you can always try to upgrade your BIOS firmware. /Michel On Wednesday 12 May 2004 01:35, Francis McPhail wrote: > Hi everyone, I've had a look through the archive and have spotted > another user who had a problem booting the .iso image of sentinix but > didn't see a solution. I thought I might raise the question/issue again. > > I have now downloaded sentinix from three different mirrors each time > the .iso file I've downloaded has come down as exactly the same size > and has the same md5 hash. (MD5 (sentinix-0.70.5.iso) = > 15265767531db906ada0a04123051363) > > However each time I burn the .iso to a CD I am unable to boot the > image from the PC I wish to install it on. I can boot the image from > my laptop or any other system we have in the office but not the one I > wish to install it on. Was wondering if there is something weird about > the .iso file that perhaps looks for the CD drive being on the primary > IDE channel, and must be a slave etc... (Though I doubt this is the > case..) > > Is anyone else having the same problems? > > As a process of elimination I've swapped out all the hard drives, and > used a few different CD drives in the system. (Samsung, ASUS, Diamond > (Mitsubishi)). > > Cheers, > Francis McPhail > > _____ > > Francis McPhail > > Phone: > > 1300 13 55 48 > > Technical Services Manager > > Fax: > > 1300 13 55 49 > > > > > > > > Blue Apache Pty Ltd > > Direct: > > 03 8696 9305 > > Melbourne - Sydney > > Mobile: > > 0438 00 00 55 > > > > > > > > www.blueapache.com > > Email: > > francis.mcphail-mbwxT/[email protected] > > _____ > > > > *********************************************************** > It is confidential to the addressee and may contain certain copyright > and/or legally privileged infomration. No-one else other than, on > behalf of the addressee, may read, print, store, copy, forward or act > in reliance on all or any part of it or its attachments. You must > scan this email and any attached files for viruses. We accept no > liability for any loss, damage or consequence resulting either > directly or indirectly from the use of attached files. > _______________________________________________ > SENTINIX mailing list > [email protected] > http://elevenprospect.com/mailman/listinfo/sentinix _______________________________________________ SENTINIX mailing list [email protected] http://elevenprospect.com/mailman/listinfo/sentinix *********************************************************** It is confidential to the addressee and may contain certain copyright and/or legally privileged infomration. No-one else other than, on behalf of the addressee, may read, print, store, copy, forward or act in reliance on all or any part of it or its attachments. You must scan this email and any attached files for viruses. We accept no liability for any loss, damage or consequence resulting either directly or indirectly from the use of attached files.