[PATCH v3 6/7] serial: 8250: hub6: Add cleanup code

At module load time a platform device is registered. That should be
undone when the module is unloaded.

Fixes: ec9f47cd6a14 ("[PATCH] Serial: Split 8250 port table")
Acked-by: Andy Shevchenko <[email protected]>
Signed-off-by: Uwe Kleine-König (The Capable Hub) <[email protected]>
---
 drivers/tty/serial/8250/8250.h          | 2 ++
 drivers/tty/serial/8250/8250_hub6.c     | 5 +++++
 drivers/tty/serial/8250/8250_platform.c | 5 ++++-
 3 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 3fd25b7a7b81..f197db78c60c 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -318,8 +318,10 @@ static inline void serial8250_pnp_exit(void) { }
 
 #ifdef CONFIG_SERIAL_8250_HUB6
 int serial8250_hub6_init(void);
+void serial8250_hub6_exit(void);
 #else
 static inline int serial8250_hub6_init(void) { return 0; }
+static inline void serial8250_hub6_exit(void) { }
 #endif
 
 #ifdef CONFIG_SERIAL_8250_RSA
diff --git a/drivers/tty/serial/8250/8250_hub6.c b/drivers/tty/serial/8250/8250_hub6.c
index 3e548530ec4e..4d4c54c951cb 100644
--- a/drivers/tty/serial/8250/8250_hub6.c
+++ b/drivers/tty/serial/8250/8250_hub6.c
@@ -53,3 +53,8 @@ int __init serial8250_hub6_init(void)
 {
 	return platform_device_register(&hub6_device);
 }
+
+void __init_or_module serial8250_hub6_exit(void)
+{
+	platform_device_unregister(&hub6_device);
+}
diff --git a/drivers/tty/serial/8250/8250_platform.c b/drivers/tty/serial/8250/8250_platform.c
index 3a2dff9ce7b7..0570366a71d0 100644
--- a/drivers/tty/serial/8250/8250_platform.c
+++ b/drivers/tty/serial/8250/8250_platform.c
@@ -326,7 +326,7 @@ static int __init serial8250_init(void)
 	serial8250_isa_devs = platform_device_alloc("serial8250", PLAT8250_DEV_LEGACY);
 	if (!serial8250_isa_devs) {
 		ret = -ENOMEM;
-		goto unreg_pnp;
+		goto unreg_hub6;
 	}
 
 	ret = platform_device_add(serial8250_isa_devs);
@@ -342,6 +342,8 @@ static int __init serial8250_init(void)
 	platform_device_del(serial8250_isa_devs);
 put_dev:
 	platform_device_put(serial8250_isa_devs);
+unreg_hub6:
+	serial8250_hub6_exit();
 unreg_pnp:
 	serial8250_pnp_exit();
 unreg_uart_drv:
@@ -369,6 +371,7 @@ static void __exit serial8250_exit(void)
 	platform_driver_unregister(&serial8250_isa_driver);
 	platform_device_unregister(isa_dev);
 
+	serial8250_hub6_exit();
 	serial8250_pnp_exit();
 
 #ifdef CONFIG_SPARC
-- 
2.55.0.11.g153666a7d9bb